Spring Brown – Geniune

The Genuine B&D Tilt-A-Dor Brown Spring (0T1886) is designed for compatible B&D track-type tilt garage door fittings.

This genuine B&D counterbalance spring helps offset the weight of the garage door panel, providing smooth and controlled opening and closing when correctly installed and adjusted.

Ideal for replacing worn, damaged, fatigued or broken springs on compatible B&D Tilt-A-Dor installations.

 

Important: This listing is for one spring only, not a pair.

The number of springs required depends on the fitting configuration. Some fittings use one spring per side, while others use two springs per side.

Garage door counterbalance springs store significant mechanical energy. Professional installation is strongly recommended.

For assistance, contact Delta Warringah Garage Doors on 1300 733 066.

$95.00

SKU: BND0T1886 Categories: , Tag: Brand:

Description

Original B&D Replacement Counterbalance Spring

The Genuine B&D Tilt-A-Dor Brown Spring (0T1886) is a replacement counterbalance spring designed for compatible B&D track-type tilt garage door fittings.

These genuine B&D springs form part of the tilt garage door’s lifting and counterbalance system, helping offset the weight of the door panel and reduce the effort required to open and close the door.

Suitable for selected B&D Tilt-A-Dor track fitting configurations, the brown spring is used in both single-spring and double-spring arrangements, depending on the fitting model.

Each purchase includes one genuine B&D replacement spring.

Genuine B&D Replacement Spring

B&D Tilt-A-Dor track fittings incorporate counterbalance springs to assist with lifting and balancing one-piece tilt garage doors.

Correctly selected and installed springs help provide:

  • Smooth and controlled garage door movement
  • Reduced manual lifting effort
  • Correct counterbalance of the garage door panel
  • Reduced operating load on compatible automatic garage door openers
  • Consistent operation throughout the door’s travel

Spring Measurements & Specifications

Specification Details
Manufacturer B&D
Product Range Tilt-A-Dor
Part Number 0T1886
Product Brown Counterbalance Spring
Spring Type Extension Spring
Wire Diameter 5.6mm
Outside Diameter 41mm
Active Spring Length 539mm
Spring Identification Brown
Quantity Supplied 1 Spring
Application Compatible Track-Type Tilt Doors

Measurement Note: Active spring length refers to the active coiled section of the spring, not its complete overall length including the end hooks.

Compatible B&D Tilt-A-Dor Fittings

B&D’s track fitting documentation identifies brown springs for the following configurations:

B&D Fitting Door Height Range Door Weight Range Springs Per Side
70-T-1950 1800–1950mm 30–70kg 1
100-T-1950 1800–1950mm 71–100kg 1
70-T-2250 1951–2250mm 30–70kg 1
100-T-2250 1951–2250mm 71–100kg 1
70-T-2450 2251–2450mm 30–70kg 1
100-T-2450 2251–2450mm 71–100kg 1
120-T-2100 1900–2100mm 101–120kg 2
175-T-2100 1900–2100mm 121–175kg 2
120-T-2400 2101–2400mm 101–120kg 2
175-T-2400 2101–2400mm 121–175kg 2

These configurations are identified in B&D’s Tilt-A-Dor track fitting selection chart.

Always verify the existing fitting model, spring specification and actual garage door weight before ordering.

How Many Springs Do You Need?

The number of springs required depends on the B&D track fitting configuration.

Fitting Range Springs Per Side Total Springs Order Quantity
70-T / 100-T 1 2 2
120-T / 175-T (Brown Spring Models) 2 4 4

Important: This product is sold individually.

Customers replacing all springs on a single-spring-per-side fitting require 2 springs, while customers replacing all springs on a compatible double-spring-per-side fitting require 4 springs.

When Should Tilt Door Springs Be Replaced?

Garage door counterbalance springs experience repeated loading and unloading during normal operation.

Over time, springs can become fatigued, corroded, stretched or damaged.

Common signs of spring-related problems include:

  • Garage door becoming unusually heavy to lift
  • Door failing to remain correctly balanced
  • Uneven or difficult door movement
  • Visible corrosion or spring damage
  • Broken or excessively stretched springs
  • Excessive strain on an automatic garage door opener
  • Door failing to remain in its open position

The complete counterbalance mechanism should be inspected before replacing springs.

What’s Included?

  • 1 × Genuine B&D Tilt-A-Dor Brown Counterbalance Spring – 0T1886

This listing is for one spring only.

Not Included:

  • Additional springs
  • Spring mounting brackets
  • Lifting arms
  • Tracks or other tilt door fittings
  • Garage door panel
  • Automatic garage door opener

Important Compatibility Information

Before ordering, confirm:

  • Existing B&D Tilt-A-Dor fitting model
  • Existing spring identification
  • Spring wire diameter
  • Spring outside diameter
  • Spring body and active length
  • Number of springs required
  • Actual garage door weight

Spring colour alone should not be used to determine compatibility.

Installation & Safety

Garage door counterbalance springs store significant mechanical energy and can cause serious injury if incorrectly handled.

Replacement and adjustment should only be undertaken by a suitably qualified garage door technician.

Following installation, the garage door must be checked for correct spring balance, smooth movement and secure mounting.

Never attempt to remove, tension or adjust garage door springs without appropriate training and equipment.

Need Assistance?

For assistance identifying the correct genuine B&D replacement springs for your Tilt-A-Dor garage door, contact Delta Warringah Garage Doors on 1300 733 066.