Description
The B&D SDO-9V3 Smart Pro Garage Door Operator & Wireless Safety Beam package combines B&D’s premium high-capacity sectional garage door opener with Wireless Safety Beams, integrated smart connectivity and battery backup as standard.
Designed for larger, heavier and premium residential sectional garage doors, the SDO-9V3 Smart Pro delivers up to 1400N peak pulling force and is suitable for correctly balanced garage doors up to 18m² and 300kg gross door weight.
The included Wireless Safety Beams provide non-contact obstruction detection across the garage door opening, while the standard battery backup allows continued garage door operation during a mains power failure.
B&D Part Number: 101002
Please Note: C-Rail is not included and must be selected separately to suit the garage door height and installation.
💪 High-Capacity Smart Pro Operator
The SDO-9V3 Smart Pro is B&D’s premium high-capacity residential sectional garage door operator.
With up to 1400N peak pulling force, it is particularly suited to applications including:
- Large sectional garage doors
- Double garage doors
- Heavy sectional doors
- Insulated garage doors
- Architectural garage doors
- Custom sectional doors
- Custom-clad garage doors
The garage door must be correctly spring balanced and operating freely before automation.
⚡ 1400N Peak Pulling Force
The SDO-9V3 provides:
- 1400N short-term peak force
- 450N rated load
The increased capacity makes the Smart Pro particularly suitable for larger residential sectional doors where a lower-capacity garage door operator may not be appropriate.
Final operator suitability should consider:
- Door Height × Width
- Finished door weight
- Door construction
- Insulation
- Cladding weight
- Spring balance
- Track configuration
- Door friction
- Available headroom
🚪 Up to 300kg Garage Door Weight
B&D specifies the SDO-9V3 for correctly balanced garage doors with a maximum gross door weight of:
- 300kg
Maximum rated door area:
- 18m²
The 300kg specification refers to the gross weight of the complete garage door and fittings.
The SDO-9V3 is not designed to lift the dead weight of an unbalanced 300kg door.
Correct spring counterbalance is essential for safe and reliable operation.
🔋 Battery Backup Included as Standard
Battery backup is included as standard with every B&D SDO-9V3 Smart Pro.
The Smart Pro is supplied with two battery kits integrated into the opener system, providing backup power when the normal 230–240V mains supply is unavailable.
This allows the garage door opener to continue operating for a limited number of cycles during a power failure.
There is no need to purchase a separate battery backup kit for the SDO-9V3.
⚡ Continue Operating During Power Failures
The standard battery backup is particularly useful when the garage forms an important access point to the property.
During a mains power failure, the backup batteries can continue supplying the opener so the garage door can still be electrically opened and closed.
This provides additional convenience for:
- Garages used as a primary entrance
- Homes without convenient secondary garage access
- Properties experiencing occasional power outages
- Smart garage installations
- Larger automatic sectional doors
Available operating cycles during a power failure depend on factors including battery condition, door balance, door size, temperature and frequency of operation.
🔌 Automatic Battery Charging
During normal operation, the opener maintains the battery backup system from the mains power supply.
This keeps the batteries charged and ready for use when mains power is interrupted.
Like all rechargeable batteries, backup batteries are service components and their capacity will gradually reduce with age.
Battery condition should therefore be checked as part of normal garage door opener servicing.
📱 Integrated Smart Phone Control
The SDO-9V3 Smart Pro is designed for connected garage door operation.
Smart functionality allows compatible smartphone control and monitoring of the garage door through B&D’s connected system.
Depending on the configured system and available app functions, this can provide convenient access to features such as:
- Remote garage door operation
- Door status monitoring
- Garage access management
- Activity monitoring
- Supported notifications
- Remote operation while away from home
An appropriate internet connection and network configuration are required for online smart functions.
🛡️ Wireless Safety Beams Included
Part number 101002 includes the B&D Wireless Safety Beam Kit.
The Safety Beams create an invisible infrared detection beam across the garage door opening.
If a person, vehicle, pet or other obstruction interrupts the beam while the garage door is closing, the opener is designed to stop and reverse the door.
This provides non-contact obstruction detection before the garage door makes physical contact with an object.
📡 Wireless Safety Beam Technology
The included Wireless Safety Beams simplify installation compared with conventional fully wired photoelectric safety systems.
The beam system is positioned across the garage door opening to detect obstructions within the protected beam area.
Wireless communication reduces the amount of conventional low-voltage wiring required around the garage door opening.
This can provide a cleaner and more convenient installation, particularly on existing garages where running additional cables may be difficult.
👶 Additional Protection for People & Pets
Safety Beams provide an important additional layer of protection around an automatic garage door.
They are particularly valuable in homes with:
- Young children
- Pets
- Multiple vehicles
- Bicycles
- Motorcycles
- Regular pedestrian traffic through the garage
- Remotely operated garage doors
The Safety Beams detect an obstruction before the closing garage door needs to physically contact it.
🚗 Protect Vehicles & Property
Wireless Safety Beams can also help prevent the garage door from closing onto vehicles and other objects positioned within the protected beam area.
Typical obstructions can include:
- Cars
- Trailers
- Bicycles
- Motorcycles
- Storage equipment
- Garden equipment
The beam system must remain correctly aligned and operational for reliable obstruction detection.
📲 Safety for Smart Remote Operation
Smartphone control can allow the garage door to be operated when the user does not have direct line-of-sight of the opening.
For this reason, Safety Beams are an important part of the Smart Pro installation.
B&D specifies Safety Beams where a smart device is used to operate the garage door when the door is not within line-of-sight.
Part number 101002 conveniently combines the SDO-9V3 Smart Pro with the required Wireless Safety Beam system.
🎮 Two Premium Transmitters Included
The package includes:
- 2 × B&D TB-7 Premium Keyring Transmitters
These provide conventional wireless control of the garage door in addition to the Smart Pro’s connected smartphone functionality.
Additional compatible transmitters can be programmed to the opener where required.
🎛️ Wireless Wall Button Included
The package also includes:
- 1 × B&D WTB-8 Premium Wireless Wall Button
The wall-mounted wireless controller provides a convenient control point inside the garage without requiring a conventional hard-wired wall switch.
📡 Multi-Frequency Receiver
The SDO-9V3 incorporates B&D multi-frequency receiver technology.
The receiver provides capacity for up to:
- 64 four-button transmitter codes
This provides substantial transmitter capacity for residential and compatible shared-access applications.
🪶 Soft Start & Soft Stop
The Smart Pro electronically controls acceleration and deceleration during garage door travel.
Soft start and soft stop operation reduces abrupt movement as the door begins and finishes each cycle.
Benefits include:
- Smoother operation
- Reduced mechanical shock
- Quieter movement
- Reduced stress on the garage door
- More refined operation
This is particularly beneficial on larger sectional garage doors.
🛑 Electronic Obstruction Detection
In addition to the included Wireless Safety Beams, the SDO-9V3 incorporates electronic obstruction detection.
The opener monitors resistance encountered during garage door travel.
If abnormal resistance is detected, the opener can respond according to its programmed safety operation.
The combination of electronic force monitoring and photoelectric Safety Beams provides multiple layers of obstruction detection.
💡 LED Courtesy Lighting
The Smart Pro incorporates LED courtesy lighting.
The lighting automatically illuminates around garage door operation, providing additional visibility when entering or leaving the garage.
🐕 PET Mode
PET Mode allows the garage door to be opened to a programmed partial position rather than travelling fully open.
This can be useful where partial garage access is required without completely opening the garage door.
🏖️ Vacation Mode
Vacation Mode provides additional control over normal transmitter operation when the property will not be used for an extended period.
This can be useful when:
- Travelling
- Leaving the property unattended
- Restricting normal remote operation temporarily
🔄 Auto-Close Capability
The Smart Pro supports compatible automatic closing functions.
When correctly configured, Auto-Close can automatically close the garage door after a programmed period.
The included Wireless Safety Beams provide the obstruction detection required for compatible Auto-Close configurations.
All safety equipment must be correctly installed, aligned and commissioned before Auto-Close is enabled.
🔐 B&D AUTO-LOCK™ Compatible
The SDO-9V3 Smart Pro is designed for integration with compatible B&D AUTO-LOCK™ equipment.
AUTO-LOCK™ provides an additional physical locking point on the garage door when the door reaches the closed position.
This can provide additional mechanical security beyond relying solely on the opener and rail to hold the garage door closed.
AUTO-LOCK™ is not included with this package unless specifically stated.
📐 Low Headroom Requirement
B&D specifies a minimum headroom requirement of approximately:
- 57mm
Actual installation requirements depend on:
- Garage door construction
- Track configuration
- Selected C-Rail
- Ceiling structure
- Mounting arrangement
The available installation space should be checked before selecting the opener and rail.
🛤️ C-Rail Not Included
Part number 101002 does not include a C-Rail.
A compatible B&D / ATA C-Rail must be selected separately according to the garage door and installation.
This allows the appropriate rail to be chosen based on:
- Garage door height
- Available headroom
- Required rail length
- Belt or chain drive preference
- Installation configuration
⛓️ Belt & Chain Rail Options
The SDO-9V3 can be paired with compatible B&D / ATA C-Rail configurations.
Depending on the application, compatible rail options are available with:
- Belt drive
- Chain drive
Belt-drive rails are particularly suitable where quiet and refined operation is a priority.
Chain-drive rails provide a robust conventional drive arrangement.
The correct rail must be selected separately.
🔧 Ideal for New Installations
The 101002 package provides the main automation, smart, backup-power and safety components required for a premium sectional garage door installation.
Simply select the appropriate compatible C-Rail according to the garage door height and installation requirements.
♻️ Suitable for Opener Upgrades
The Smart Pro can also be used when replacing an existing sectional garage door opener.
An existing rail should not automatically be assumed to be compatible.
Before replacing an existing opener, check:
- Garage door condition
- Spring balance
- Gross door weight
- Door area
- Existing rail compatibility
- Available headroom
- Mounting arrangement
- Electrical supply
Where required, install a new compatible B&D / ATA C-Rail.
📦 Package Includes
The B&D SDO-9V3 Smart Pro Garage Door Operator & Wireless Safety Beam package includes:
- 1 × B&D SDO-9V3 Smart Pro Drive Unit
- 2 × Battery Kits – battery backup included as standard
- 2 × B&D TB-7 Premium Keyring Transmitters
- 1 × B&D WTB-8 Premium Wireless Wall Button
- 1 × B&D Wireless Safety Beam Kit
- Associated operator installation hardware
C-Rail is not included.
B&D AUTO-LOCK™ is not included unless specifically stated.
⭐ Key Features
- Genuine B&D garage door operator package
- B&D part number 101002
- SDO-9V3 Smart Pro
- Premium sectional garage door opener
- 1400N peak pulling force
- 450N rated load
- Maximum 300kg gross door weight
- Maximum 18m² door area
- Battery backup included as standard
- 2 × battery kits included
- Continued limited operation during mains power failures
- Automatic battery charging during normal powered operation
- Wireless Safety Beams included
- Integrated smart functionality
- Smartphone operation and monitoring capability
- Two TB-7 Premium keyring transmitters included
- WTB-8 Premium wireless wall button included
- Multi-frequency receiver
- Capacity for up to 64 four-button transmitter codes
- Electronic obstruction detection
- Wireless photoelectric obstruction detection
- Soft start and soft stop
- Adjustable operating speeds
- Auto-Close capability
- PET Mode
- Vacation Mode
- LED courtesy lighting
- B&D AUTO-LOCK™ compatible
- Approximately 57mm minimum headroom
- Compatible with selected belt-drive C-Rails
- Compatible with selected chain-drive C-Rails
- C-Rail selected separately
🔧 Specifications
- Manufacturer: B&D
- Model: SDO-9V3 Smart Pro
- B&D Part Number: 101002
- Product Type: Sectional Garage Door Operator & Wireless Safety Beam Package
- C-Rail Included: No
- Rated Voltage: 230–240V AC
- Rated Frequency: 50Hz
- Rated Power Input: 220W
- Peak Force: 1400N
- Rated Load: 450N
- Maximum Door Area: 18m²
- Maximum Gross Door Weight: 300kg
- Minimum Headroom: Approximately 57mm
- Rated Operating Time: 4 Minutes
- Operating Temperature: +5°C to +40°C
- Receiver: Multi-Frequency
- Receiver Capacity: Up to 64 Four-Button Transmitter Codes
- Smart Connectivity: Yes
- Wireless Safety Beams: Included
- Battery Backup: Included as Standard
- Battery Kits: 2 Included
- Electronic Obstruction Detection: Yes
- Soft Start / Soft Stop: Yes
- LED Courtesy Lighting: Yes
- Handheld Transmitters: 2 × TB-7 Included
- Wall Control: 1 × WTB-8 Included
- AUTO-LOCK™ Compatible: Yes
- Belt C-Rail Compatible: Yes
- Chain C-Rail Compatible: Yes
🔗 Compatibility
Designed for compatible residential sectional garage doors within the operating limits of the B&D SDO-9V3 Smart Pro.
Maximum specifications:
- Door Area: 18m²
- Gross Door Weight: 300kg
The garage door must be correctly spring balanced and operating freely before automation.
A compatible B&D / ATA C-Rail is required.
Compatible rail configurations include selected:
- Belt-drive C-Rails
- Chain-drive C-Rails
The appropriate rail length must be selected according to the garage door height and installation.
⚠️ Please Note
This product is B&D part number 101002.
This package includes the SDO-9V3 Smart Pro operator, Wireless Safety Beams and battery backup.
Battery backup is standard equipment on the SDO-9V3 Smart Pro and does not need to be purchased separately.
The Smart Pro is supplied with two battery kits.
C-Rail is not included.
A compatible C-Rail must be selected separately according to the garage door height and installation requirements.
B&D AUTO-LOCK™ is compatible with the Smart Pro but is not included unless specifically stated.
The 300kg specification refers to maximum gross garage door weight. The opener is not designed to lift an unbalanced 300kg garage door.
The garage door must be correctly spring balanced, mechanically sound and capable of safe manual operation before automation.
The included Wireless Safety Beams must be correctly installed, aligned and commissioned for safe smart operation.
Backup operating capacity during a power failure depends on battery condition, door balance, door size, operating conditions and frequency of use.
If you are unsure whether the SDO-9V3 Smart Pro is suitable for your garage door or which C-Rail is required, contact our Technical Support team on 1300 733 066 for assistance.
