Description
Original B&D Replacement Counterbalance Spring
The Genuine B&D Tilt-A-Dor Brown Spring (0T1886) is a replacement counterbalance spring designed for compatible B&D track-type tilt garage door fittings.
These genuine B&D springs form part of the tilt garage door’s lifting and counterbalance system, helping offset the weight of the door panel and reduce the effort required to open and close the door.
Suitable for selected B&D Tilt-A-Dor track fitting configurations, the brown spring is used in both single-spring and double-spring arrangements, depending on the fitting model.
Each purchase includes one genuine B&D replacement spring.
Genuine B&D Replacement Spring
B&D Tilt-A-Dor track fittings incorporate counterbalance springs to assist with lifting and balancing one-piece tilt garage doors.
Correctly selected and installed springs help provide:
- Smooth and controlled garage door movement
- Reduced manual lifting effort
- Correct counterbalance of the garage door panel
- Reduced operating load on compatible automatic garage door openers
- Consistent operation throughout the door’s travel
Spring Measurements & Specifications
| Specification | Details |
|---|---|
| Manufacturer | B&D |
| Product Range | Tilt-A-Dor |
| Part Number | 0T1886 |
| Product | Brown Counterbalance Spring |
| Spring Type | Extension Spring |
| Wire Diameter | 5.6mm |
| Outside Diameter | 41mm |
| Active Spring Length | 539mm |
| Spring Identification | Brown |
| Quantity Supplied | 1 Spring |
| Application | Compatible Track-Type Tilt Doors |
Measurement Note: Active spring length refers to the active coiled section of the spring, not its complete overall length including the end hooks.
Compatible B&D Tilt-A-Dor Fittings
B&D’s track fitting documentation identifies brown springs for the following configurations:
| B&D Fitting | Door Height Range | Door Weight Range | Springs Per Side |
|---|---|---|---|
| 70-T-1950 | 1800–1950mm | 30–70kg | 1 |
| 100-T-1950 | 1800–1950mm | 71–100kg | 1 |
| 70-T-2250 | 1951–2250mm | 30–70kg | 1 |
| 100-T-2250 | 1951–2250mm | 71–100kg | 1 |
| 70-T-2450 | 2251–2450mm | 30–70kg | 1 |
| 100-T-2450 | 2251–2450mm | 71–100kg | 1 |
| 120-T-2100 | 1900–2100mm | 101–120kg | 2 |
| 175-T-2100 | 1900–2100mm | 121–175kg | 2 |
| 120-T-2400 | 2101–2400mm | 101–120kg | 2 |
| 175-T-2400 | 2101–2400mm | 121–175kg | 2 |
These configurations are identified in B&D’s Tilt-A-Dor track fitting selection chart.
Always verify the existing fitting model, spring specification and actual garage door weight before ordering.
How Many Springs Do You Need?
The number of springs required depends on the B&D track fitting configuration.
| Fitting Range | Springs Per Side | Total Springs | Order Quantity |
|---|---|---|---|
| 70-T / 100-T | 1 | 2 | 2 |
| 120-T / 175-T (Brown Spring Models) | 2 | 4 | 4 |
Important: This product is sold individually.
Customers replacing all springs on a single-spring-per-side fitting require 2 springs, while customers replacing all springs on a compatible double-spring-per-side fitting require 4 springs.
When Should Tilt Door Springs Be Replaced?
Garage door counterbalance springs experience repeated loading and unloading during normal operation.
Over time, springs can become fatigued, corroded, stretched or damaged.
Common signs of spring-related problems include:
- Garage door becoming unusually heavy to lift
- Door failing to remain correctly balanced
- Uneven or difficult door movement
- Visible corrosion or spring damage
- Broken or excessively stretched springs
- Excessive strain on an automatic garage door opener
- Door failing to remain in its open position
The complete counterbalance mechanism should be inspected before replacing springs.
What’s Included?
- 1 × Genuine B&D Tilt-A-Dor Brown Counterbalance Spring – 0T1886
This listing is for one spring only.
Not Included:
- Additional springs
- Spring mounting brackets
- Lifting arms
- Tracks or other tilt door fittings
- Garage door panel
- Automatic garage door opener
Important Compatibility Information
Before ordering, confirm:
- Existing B&D Tilt-A-Dor fitting model
- Existing spring identification
- Spring wire diameter
- Spring outside diameter
- Spring body and active length
- Number of springs required
- Actual garage door weight
Spring colour alone should not be used to determine compatibility.
Installation & Safety
Garage door counterbalance springs store significant mechanical energy and can cause serious injury if incorrectly handled.
Replacement and adjustment should only be undertaken by a suitably qualified garage door technician.
Following installation, the garage door must be checked for correct spring balance, smooth movement and secure mounting.
Never attempt to remove, tension or adjust garage door springs without appropriate training and equipment.
Need Assistance?
For assistance identifying the correct genuine B&D replacement springs for your Tilt-A-Dor garage door, contact Delta Warringah Garage Doors on 1300 733 066.


