Description
Track-Guided Lifting System for One-Piece Tilt Garage Doors
The B&D Tilt-A-Dor D100 2700 Adjustable Track Fittings are designed for compatible one-piece tilt garage doors requiring a track-guided lifting and counterbalance mechanism.
B&D Tilt-A-Dor track fittings use horizontal tracks, lifting arms and spring-assisted counterbalance components to guide and support the garage door throughout its opening and closing movement.
Suitable for new installations or replacement of compatible existing fittings, the D100 2700 configuration is intended for applications requiring the corresponding 2700mm-height fitting arrangement.
⚙️ Smooth Track-Guided Operation
B&D Tilt-A-Dor track fittings incorporate horizontal tracks extending into the garage.
These tracks guide the garage door panel as it opens, helping support the door in its raised position and limiting outward projection compared with suitable jamb-type fitting arrangements.
Key Benefits:
- Smooth, controlled opening and closing
- Horizontal track-guided operation
- Spring-assisted lifting
- Adjustable mounting and alignment
- Suitable for compatible one-piece tilt garage doors
- Supports manual or appropriately configured automatic operation
🔩 Spring-Assisted Counterbalance System
The B&D Tilt-A-Dor track fitting system uses counterbalance springs to help offset the weight of the garage door panel.
When correctly selected and adjusted, the springs reduce the force required to open and close the door.
The correct spring configuration must be matched to the actual weight of the completed garage door panel.
Important: The exact spring quantity, spring colour and weight capacity of the D100 2700 configuration must be verified against its manufacturer identification.
📐 2700mm Door Height Configuration
The D100 2700 is identified as a 2700mm-height fitting configuration.
B&D’s documented 2700mm double-spring track fittings are intended for door heights between 2401mm and 2700mm, with the applicable weight capacity determined by the specific fitting model.
The exact D100 2700 weight rating should be confirmed before selecting or installing these fittings.
🚪 Suitable Applications
- Residential one-piece tilt garage doors
- Custom-built tilt garage door panels
- Replacement of compatible existing B&D track fittings
- New tilt garage door installations
- Manual tilt garage doors
- Tilt doors fitted with compatible automatic openers
⭐ Key Features
- B&D Tilt-A-Dor adjustable track fittings
- D100 2700 product configuration
- Designed for compatible one-piece tilt garage doors
- Track-guided lifting mechanism
- Spring-assisted counterbalance
- Adjustable mounting and alignment
- Suitable for manual or compatible automatic operation
- Suitable for new installations and replacement applications
- Professional installation recommended
🔧 Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | B&D |
| Product Range | Tilt-A-Dor |
| Product Model | D100 2700 |
| Product Type | Adjustable Track Fittings |
| Door Type | One-Piece Tilt Garage Door |
| Nominal Height Configuration | 2700mm |
| Door Weight Rating | Requires Confirmation |
| Counterbalance | Spring Assisted |
| Spring Configuration | Requires Confirmation |
| Operation | Manual or Compatible Automatic |
| Application | Residential Tilt Garage Doors |
📦 What’s Included?
Supplied as B&D Tilt-A-Dor Adjustable Track Fittings – D100 2700.
The exact components and quantities supplied should be checked against the manufacturer’s packing list for this specific product.
Not Included:
- Garage door panel
- Automatic garage door opener
- Optional accessories unless expressly specified
🛠️ Installation & Safety
B&D Tilt-A-Dor fittings should be installed by a suitably qualified garage door technician.
The system incorporates high-tension counterbalance springs and mechanical lifting components that can cause serious injury if incorrectly installed or adjusted.
Before installation, the installer should confirm:
- Finished garage door panel weight
- Door height and opening dimensions
- Correct fitting and spring configuration
- Required headroom and side clearance
- Suitable structural mounting points
- Compatibility with any automatic garage door opener
Following installation, the garage door must be checked for correct balance, smooth travel and secure mounting.
⚠️ Important Compatibility Information
Tilt door fittings must be selected according to the actual door weight, dimensions and installation requirements.
Incorrect fitting selection can cause poor door balance, excessive operating forces and premature component wear.
Do not substitute the D100 2700 for another B&D fitting configuration without confirming compatibility.
Need Assistance?
For assistance selecting the correct B&D Tilt-A-Dor fittings or confirming compatibility with your garage door, contact Delta Warringah Garage Doors on 1300 733 066.


