Description
The B&D Series 1 Locking Bar Retainer is a replacement retainer clip used to support and guide the locking bar on compatible B&D roller doors.
This is the newer-style black locking bar retainer used on compatible B&D roller doors manufactured from August 1996 onwards.
The retainer attaches to the side of the roller door guide and supports the steel locking bar as it travels between the centre lock assembly and the door guide.
B&D Part Number: 51039
🔒 Roller Door Locking Bar Retainer
The locking bar retainer forms part of the manual locking system fitted to compatible B&D roller doors.
B&D roller door lock systems use steel locking bars extending from the centre lock assembly toward each side of the door.
The retainer supports and positions the locking bar so that it remains correctly located as the lock is operated.
⚙️ Supports the Locking Bar
The retainer helps guide the locking bar along the inside of the roller door.
When the centre lock is operated, the locking bars move sideways toward or away from the door guides.
The locking bar retainer helps keep the bar correctly positioned during this movement.
A damaged, broken or missing retainer can allow the locking bar to move out of its intended position.
📅 Used From August 1996
This is the newer-style locking bar retainer used on compatible B&D roller doors from August 1996 onwards.
For older B&D roller doors, the locking hardware may be different.
When replacing an existing retainer, check:
- Approximate age of the roller door
- Existing locking bar arrangement
- Shape of the original retainer
- Position of the retainer on the door
- Existing lock style
Where possible, compare the replacement part with the original before ordering.
🚪 B&D Series 1 Roller Doors
The 51039 locking bar retainer is commonly associated with B&D Series 1 roller door locking systems.
B&D Series 1 roller door assemblies use locking bars extending from the central lock mechanism toward the guides on each side of the door.
The locking bar retainers form part of this locking system.
🔐 Compatible B&D Lock Systems
Part 51039 is used with compatible B&D roller door lock arrangements including selected:
- B&D Series 1
- B&D Roll-A-Door
- B&D Firmadoor
- B&D Rollmasta
- B&D Deluxe lock arrangements
Compatibility can vary according to the age and configuration of the door.
The existing retainer should be compared with the replacement where there is any uncertainty.
📍 Guide-Mounted Design
The locking bar retainer attaches at the side of the roller door guide.
Its position allows it to support the locking bar close to the point where the bar engages with the guide when the door is locked.
Correct positioning is important to ensure that the locking bar operates freely without binding.
🔄 Replacement Spare Part
The 51039 is ideal for replacing an existing locking bar retainer that has become:
- Broken
- Cracked
- Damaged
- Missing
- Worn
- Loose
Replacing a damaged retainer can help restore correct alignment of the locking bar without replacing the complete roller door lock assembly.
🛠️ Simple Roller Door Repair
Because the retainer is a separate component of the locking system, it can be replaced individually where the remaining lock components are still serviceable.
This can provide a straightforward repair for older B&D roller doors where the centre lock and locking bars remain in good condition.
After replacement, the lock should be operated several times to confirm that both locking bars move freely and engage correctly.
📐 Compact Replacement Component
The 51039 is a small component designed specifically to support the locking bar.
Published dimensions for the retainer are approximately:
- Length: 42mm
- Width: 22mm
- Depth: 21mm
- Weight: approximately 6g
These dimensions can assist when comparing the replacement against an existing component.
⚫ Black Finish
This listing is for the black version of the newer-style locking bar retainer.
The compact black component is designed to integrate neatly with the locking hardware on compatible B&D roller doors.
⭐ Key Features
- B&D locking bar retainer
- Genuine-style replacement roller door component
- B&D part number 51039
- Newer-style locking bar retainer
- Used from August 1996 onwards
- Black finish
- Designed for compatible B&D roller doors
- Supports the steel locking bar
- Helps maintain correct locking bar alignment
- Attaches near the roller door guide
- Suitable for B&D Series 1 locking systems
- Suitable for compatible Roll-A-Door models
- Suitable for compatible Firmadoor models
- Suitable for compatible Rollmasta models
- Compatible with selected Deluxe lock arrangements
- Ideal replacement for damaged or missing retainers
- Individual replacement component
- Complete lock replacement generally not required when only the retainer is damaged
🔧 Specifications
- Manufacturer: B&D
- Product: Locking Bar Retainer
- Part Number: 51039
- Alternative Part Reference: 051039
- Product Type: Roller Door Locking Bar Retainer
- Series: Series 1
- Style: New Style
- Colour: Black
- Used From: August 1996
- Approximate Dimensions: 42 × 22 × 21mm
- Approximate Weight: 6g
- Application: Roller Door Locking System
- Quantity: 1 × Locking Bar Retainer
🔗 Compatibility
Designed for compatible B&D roller doors using the newer-style locking bar retainer fitted from August 1996 onwards.
Known applications include selected:
- B&D Series 1 roller doors
- B&D Roll-A-Door
- B&D Firmadoor
- B&D Rollmasta
- B&D Deluxe locking systems
Part number:
- 51039
- 051039
Because B&D roller door locking hardware has changed over time, visually compare the existing retainer with this part where possible.
⚠️ Please Note
This listing is for one locking bar retainer only.
Locking bars, centre lock assembly, lock faceplate, keys and other roller door hardware are not included unless specifically stated.
This is the newer-style retainer used on compatible doors from August 1996 onwards.
Older B&D roller doors manufactured before August 1996 may use a different locking bar retainer and should be checked before ordering.
Compatibility can vary according to the roller door model, age and locking system.
For the best compatibility check, compare the existing retainer and B&D part number before ordering.


