Description
150T TILT DOOR TRACK FITTINGS – COMPLETE KIT
The 150T Tilt Door Track Fittings – Complete Kit is an aftermarket replacement fitting system designed to match the original-style B&D tilt garage door track fittings supplied prior to 2008.
Designed for compatible one-piece tilt garage doors, this complete fitting system provides a replacement solution for older track-guided lifting mechanisms where the existing fittings have become worn, damaged or are no longer suitable for continued operation.
The system uses lifting arms, horizontal tracks and counterbalance springs to guide and balance the garage door panel during opening and closing.
The complete kit includes everything required to install the fittings, excluding the garage door panel itself.
🔧 HOW TO IDENTIFY 150T FITTINGS
One of the most important measurements when identifying existing 150T tilt door fittings is the distance between the two pivot points on the power arm.
150T Power Arm Measurement: 870mm
Measure from the centre of one pivot point to the centre of the other pivot point on the power arm.
This is a centre-to-centre measurement, not the overall length of the arm.
The 870mm measurement is an important identification reference when replacing older B&D-style fittings.
Always confirm the existing fitting configuration and installation requirements before ordering.
⚙️ KEY FEATURES
- Complete Installation Kit – Everything required to install the fittings, excluding the door panel.
- Aftermarket Replacement – Designed to match pre-2008 B&D-style tilt door track fittings.
- 150T Configuration – Suitable for compatible one-piece tilt garage doors.
- 870mm Power Arm – Centre-to-centre distance between the two pivot points.
- Track-Guided Operation – Designed for smooth and controlled tilt door movement.
- Spring-Assisted Counterbalance – Helps offset the weight of the garage door panel.
- Manual or Automatic Operation – Suitable for compatible manual or motorised tilt doors.
- Replacement Application – Ideal for repairing or refurbishing older tilt garage door installations.
📋 TECHNICAL SPECIFICATIONS
| Specification | Details |
|---|---|
| Product | 150T Tilt Door Track Fittings |
| Fitting Configuration | 150T |
| Product Type | Aftermarket Replacement |
| Design Reference | Pre-2008 B&D-Style Track Fittings |
| Door Type | One-Piece Tilt Garage Door |
| Fitting Style | Track-Type |
| Power Arm Pivot-to-Pivot | 870mm |
| Measurement Method | Centre-to-Centre |
| Counterbalance | Spring-Assisted |
| Operation | Manual or Compatible Automatic Opener |
| Supply | Complete Installation Kit |
🚪 DESIGNED FOR OLDER B&D-STYLE TILT DOORS
Many older one-piece tilt garage doors were installed with B&D track-type fittings.
These fittings use horizontal tracks and lifting arms to guide the garage door panel through its opening and closing movement.
The aftermarket 150T fitting system is designed to match the earlier B&D-style track fitting arrangement supplied prior to 2008.
This makes the kit suitable for compatible installations where the existing fittings require replacement or refurbishment.
🔩 HOW THE TRACK FITTINGS WORK
Unlike sectional garage doors, a tilt garage door operates as a single solid panel.
The lifting arms and horizontal tracks guide the panel as it moves from the closed position into the open position.
Counterbalance springs help offset the weight of the panel, reducing the force required for manual operation or operation by a compatible automatic garage door opener.
Correct installation, alignment and spring adjustment are essential for smooth and balanced operation.
📦 WHAT’S INCLUDED?
The 150T Complete Kit includes the components required to install a compatible one-piece tilt garage door.
- Horizontal tracks and associated track hardware
- Left-hand and right-hand lifting arm assemblies
- Counterbalance springs
- Spring mounting and attachment components
- Track rollers and associated fittings
- Mounting brackets
- Required fasteners and fixing components
Everything required for the fitting installation is supplied. Simply provide the compatible garage door panel.
An automatic garage door opener is not included.
📐 COMPATIBILITY & INSTALLATION REQUIREMENTS
These aftermarket fittings are designed to match the original-style B&D 150T track fitting arrangement supplied prior to 2008.
Before ordering, confirm:
- 870mm centre-to-centre power arm measurement
- Existing 150T fitting configuration
- Garage door panel dimensions
- Actual garage door weight
- Available headroom and side clearance
- Track mounting requirements
- Suitable structural mounting points
- Compatibility with any existing automatic opener
The 870mm power arm measurement is an important identification guide but should not be used as the sole compatibility check.
These fittings should not be assumed interchangeable with every B&D track fitting model or newer fitting systems.
🛠️ REPLACEMENT & REFURBISHMENT
The 150T Complete Kit is suitable for replacing compatible older tilt door fittings where components have become worn or damaged.
Common reasons for replacement include worn lifting arms, damaged horizontal tracks, excessive movement in fitting components, deteriorated mounting points or difficulty operating the garage door.
Replacing the fitting system may allow an otherwise serviceable garage door panel to remain in use.
The existing door panel and mounting structure should be inspected before installation.
⚠️ INSTALLATION & SAFETY
Tilt garage door fittings operate under substantial mechanical loads, and counterbalance springs store significant energy.
Incorrect installation or adjustment can cause serious injury or damage to the garage door.
Installation should only be undertaken by a suitably qualified garage door technician familiar with track-type tilt garage door systems.
Following installation, the technician must verify correct door balance, track alignment, secure mounting and smooth operation.
ℹ️ AFTERMARKET PRODUCT INFORMATION
This product is an aftermarket replacement fitting kit designed to match the B&D-style track fittings supplied prior to 2008.
It is not manufactured or supplied as a genuine B&D product.
Compatibility must be confirmed before purchase.
📞 NEED ASSISTANCE?
Not sure whether your existing tilt garage door uses 150T fittings?
Check the power arm measurement of 870mm centre-to-centre between the two pivot points.
For further assistance identifying the correct replacement fittings, contact Delta Warringah Garage Doors on 1300 733 066.


