Description
The Torsion Spring Filler is a PVC insert designed for use inside large 95.25mm internal diameter garage door torsion springs.
Installed between the torsion spring and the torsion shaft, the filler supports the spring along its length and helps reduce spring movement, sagging, vibration and chatter during operation.
⚙️ Suits 95.25mm ID Torsion Springs
This spring filler is specifically sized for use with:
- 95.25mm internal diameter torsion springs
- 25.4mm (1″) torsion shafts
- Large residential sectional doors
- Commercial sectional doors
- Heavy custom garage doors
🔇 Reduces Spring Chatter & Noise
Large torsion springs can move and vibrate around the torsion shaft as they wind and unwind during normal garage door operation.
The PVC filler occupies the space between the torsion shaft and the inside of the spring, helping support the spring and reduce unnecessary movement.
This can help reduce:
- Spring chatter
- Vibration
- Unwanted spring movement
- Operational noise
- Spring sag on longer assemblies
🔩 Supports Large Torsion Springs
The filler provides additional support through the centre of larger torsion springs.
This is particularly useful with long or heavy spring assemblies where the large difference between the torsion shaft diameter and spring internal diameter leaves substantial clearance.
The filler sits around the torsion shaft and inside the spring, providing support along the spring assembly.
✂️ 4 Metre Length – Cut to Suit
Supplied in a 4 metre length, the spring filler can be cut to suit the required torsion spring length during assembly.
This makes it suitable for a range of different spring lengths using 95.25mm ID torsion springs.
Key Features
- PVC torsion spring filler
- Designed for 95.25mm ID torsion springs
- Suitable for 25.4mm (1″) torsion shafts
- Installed between the torsion shaft and spring
- Helps support large torsion springs
- Helps reduce spring sag
- Helps reduce spring movement and vibration
- Helps reduce torsion spring chatter
- Can contribute to quieter garage door operation
- Supplied in a 4 metre length
- Can be cut to suit the required spring length
- Suitable for residential and commercial sectional doors
Specifications
- Product Type: Torsion Spring Filler
- Material: PVC
- Suitable Spring ID: 95.25mm
- Suitable Shaft: 25.4mm (1″)
- Supplied Length: 4m
- Installation Position: Inside Torsion Spring
- Application: Garage Door Torsion Spring Systems
- Quantity: 1 × 4m Length
Compatibility
Suitable for compatible garage door torsion spring systems using:
- 95.25mm ID torsion springs
- 25.4mm (1″) torsion shafts
- 7.19mm × 95.25mm torsion springs
- 8.00mm × 95.25mm torsion springs
- Compatible PanelDor torsion spring assemblies
The filler can be cut to suit the finished spring length and spring assembly configuration.
⚠️ Important Safety Warning
Garage door torsion springs operate under extreme tension and store a significant amount of mechanical energy.
Installation or replacement of a spring filler may require work to be undertaken on the torsion spring system. Incorrect handling of these components can result in the sudden release of stored spring energy, potentially causing serious injury or death.
This product is intended for professional installation only.
Only a trained and experienced garage door professional should attempt to remove, install, replace, wind, unwind, adjust or otherwise work on a garage door torsion spring system.
⚠️ Please Note
This listing is for one 4 metre length of 95.25mm torsion spring filler only.
Torsion spring, torsion shaft, winding cones, stationary cones and other spring hardware are not included.
Always confirm the spring internal diameter and torsion shaft size before ordering.
Focus Keyphrase
95.25mm Torsion Spring Filler 4m
Meta Description
4m PVC torsion spring filler for 95.25mm ID garage door springs and 25.4mm shafts. Helps support large springs and reduce chatter, vibration and noise.
