Description
FAAC S Beam 3.3m – 428042
The FAAC S Beam 3.3m is a genuine Ø75mm round aluminium barrier boom designed for compatible FAAC automatic barrier systems.
At 3,300mm long, the S Beam provides a lightweight and streamlined boom solution for vehicle access installations and is supplied with the protective rubber profile fitted to the beam.
FAAC Part Number: 428042
🚧 3.3m Round S Barrier Beam
The FAAC S Beam features a round Ø75mm profile designed specifically for FAAC automatic barrier systems.
Specifications include:
- Beam length: 3,300mm
- Beam profile: Round S
- Outside diameter: Ø75mm
- Protective rubber profile: Included
- Reflective adhesive labels: Not included
The round profile provides a clean appearance while helping reduce the effect of wind compared with larger flat-profile barrier booms.
🔧 B614 Installation
When used with the FAAC B614, the S Beam is secured to the barrier operator using:
- FAAC S Beam Securing Pocket – 428445
The securing pocket provides the mechanical connection between the Ø75mm round boom and the B614 barrier mechanism.
The securing pocket is available separately or supplied as part of an appropriately configured B614 barrier kit.
⚙️ Balancing Spring
When installed on a FAAC B614, the boom must be correctly counterbalanced using the appropriate balancing spring configuration.
For a standard 3.3m S Beam without additional accessories, FAAC specifies one:
- FAAC B614 Balancing Spring – 721209
The required spring arrangement can change when additional equipment is fitted to the boom, including:
- LED lighting
- Skirt
- End foot
- Articulation kit
The complete boom configuration should therefore be considered when determining the correct balancing arrangement.
💡 Optional Boom Lighting
The S Beam can be fitted with FAAC’s optional luminous cord system for improved visibility.
Compatible accessories include:
- 390992 – Beam Light Connection Kit
- 390993 – 12m Luminous Cord Pack
This allows illumination to be incorporated along the boom for improved visibility during night-time and low-light operation.
🔴 Optional Reflective Markings
Reflective adhesive markings are not supplied with the 428042 beam.
FAAC offers:
- 490117 – Adhesive Reflector Kit, 6 Pieces
These can be fitted along the boom to improve visibility to approaching vehicles.
Key Features
- Genuine FAAC barrier boom
- FAAC Part Number: 428042
- Round S beam profile
- 3,300mm overall length
- Ø75mm diameter
- Protective rubber profile included
- Designed for FAAC automatic barrier systems
- Compatible with FAAC B614
- Compatible with S Beam Securing Pocket 428445
- Optional LED luminous cord available
- Optional reflective labels available
- Suitable for replacement or new barrier installations
- Used as a component in complete B614 barrier kits
Specifications
- Manufacturer: FAAC
- Brand: FAAC
- Part Number: 428042
- Product Type: Barrier Boom Arm
- Series: S Beam
- Profile: Round
- Length: 3,300mm
- Diameter: Ø75mm
- Protective Rubber Profile: Included
- Reflective Adhesive Labels: Not Included
- EAN: 8055195009194
Compatibility
Compatible with appropriate FAAC barrier systems including:
- FAAC B614
- FAAC 615
- FAAC 620
Also compatible with:
- FAAC S Beam Securing Pocket – 428445
- FAAC B614 Balancing Spring – 721209
- FAAC Beam Light Connection Kit – 390992
- FAAC Luminous Cord 12m – 390993
- FAAC Adhesive Reflector Kit – 490117
FAAC documentation also lists the 3.3m Round S beam within other compatible FAAC barrier platforms depending on the particular barrier configuration.
⚠️ Please Note
This listing is for one FAAC S Beam 3.3m – 428042.
The barrier operator, S Beam securing pocket, balancing spring, reflective labels and other barrier accessories are not included unless specifically stated.
The beam is supplied with its protective rubber profile.
Reflective adhesive labels are not included.
When installing the beam on a FAAC B614, the correct balancing spring configuration must be determined according to the finished boom length and any accessories fitted.
FAAC advises that an active safety edge cannot be installed directly onto the S Beam profile for balancing reasons.
