Description
The FAAC XLED Flashing Light (Part No. 410029) is a genuine FAAC LED warning light designed for automatic gates, barriers and compatible access automation systems.
Featuring 40 high-brightness LEDs, the XLED provides a highly visible warning indication whenever the automation system is operating, helping alert pedestrians, vehicles and other users that the automatic gate or barrier is in motion.
With support for 24V, 115V and 230V power supplies, an integrated 433/868 MHz antenna and an IP54 weather-resistant enclosure, the XLED provides a versatile warning light solution for a wide range of FAAC automation installations.
🚨 High-Visibility LED Warning Light
The FAAC XLED is designed to provide a clear visual warning whenever an automatic gate, door or barrier system is operating.
Its flashing illumination helps alert people in the surrounding area that the automation system is moving.
This makes the XLED suitable for:
- Automatic swing gates
- Automatic sliding gates
- Automatic barriers
- Residential gate automation
- Commercial access systems
- Compatible FAAC automation installations
💡 40 High-Brightness LEDs
The XLED incorporates 40 high-brightness LEDs to provide excellent visibility during operation.
The LEDs are arranged to provide strong illumination from the flashing light, helping ensure the warning signal remains clearly visible even during daylight conditions.
LED technology also provides an efficient and reliable alternative to traditional flashing lamps that use replaceable incandescent bulbs.
⚡ 24V, 115V & 230V Compatibility
One of the key advantages of the FAAC XLED is its flexible power supply compatibility.
A single XLED model can be used with:
- 24V systems
- 115V systems
- 230V systems
This allows the same flashing light to be used across a wide range of compatible FAAC gate and access automation systems.
At 230V, the XLED provides automatic internal flashing.
When operating on 24V, flashing is controlled externally by the compatible electronic control board.
📡 Integrated 433MHz & 868MHz Antenna
The FAAC XLED incorporates an integrated antenna capable of supporting both 433MHz and 868MHz radio frequencies.
The antenna can receive both frequencies simultaneously, allowing the XLED to also provide the antenna location for compatible FAAC radio receiver systems.
This helps provide a clean installation by combining the flashing warning light and radio antenna into a single enclosure.
When the integrated antenna is required, the receiver can be connected using suitable RG58 coaxial cable.
🏠 Clean & Modern Design
The FAAC XLED features a compact Italian-designed enclosure intended to complement a wide range of residential and commercial properties.
Its modern appearance provides a cleaner alternative to traditional large flashing lamps while retaining excellent visibility.
The compact design allows the XLED to integrate neatly with gate pillars, posts and other automation equipment.
🔧 Flexible Mounting Options
The XLED has been designed to provide flexibility during installation.
Depending on the site requirements, the flashing light can be installed:
- On top of a gate column or pillar
- On the side of a column
- On a suitable wall or mounting surface
This allows the installer to position the warning light where it provides good visibility while remaining neatly integrated with the automation system.
🌦️ IP54 Weather Protection
The FAAC XLED features an IP54 protection rating, making it suitable for outdoor gate and access automation installations.
The enclosure is designed to provide protection against dust ingress and water splashes encountered during normal outdoor use.
Its operating temperature range of -20°C to +55°C allows the XLED to operate across a wide range of environmental conditions.
🚗 Improve Automation Visibility
Automatic gates and barriers can begin moving while vehicles or pedestrians are nearby.
Installing a flashing warning light provides an additional visual indication that the automation system has been activated.
The XLED is particularly useful for:
- Driveway gates
- Shared residential entrances
- Apartment complexes
- Commercial properties
- Car parks
- Automatic boom gates
- High-traffic access points
The flashing light should form part of a correctly designed automation system incorporating the appropriate safety devices for the individual installation.
🔗 Designed for FAAC Automation Systems
The FAAC XLED is designed to integrate with compatible FAAC electronic control boards and automation systems.
Its multi-voltage design allows it to be used across numerous FAAC automation platforms without requiring different flashing light models for different operating voltages.
The integrated antenna also makes it particularly useful for installations using compatible FAAC 433MHz or 868MHz radio systems.
🧰 Ideal for New & Existing Installations
The FAAC XLED can be incorporated into a new gate automation installation or used to replace an existing compatible flashing light.
Its universal voltage capability makes it particularly useful for service and maintenance applications where different FAAC control systems may be encountered.
It is suitable for:
- New FAAC automation installations
- Replacement of existing flashing lights
- Gate automation upgrades
- Swing gate systems
- Sliding gate systems
- Automatic barrier installations
- Residential and commercial access systems
🔧 Genuine FAAC Accessory
The FAAC XLED Flashing Light – Part No. 410029 is a genuine FAAC automation accessory designed for compatible gate, barrier and access control systems.
Using genuine FAAC accessories provides a purpose-designed solution that integrates neatly with compatible FAAC control equipment and radio systems.
Key Features
- Genuine FAAC flashing warning light
- FAAC Part No. 410029
- XLED LED flashing light
- 40 high-brightness LEDs
- Designed for excellent daytime visibility
- Suitable for 24V power supplies
- Suitable for 115V power supplies
- Suitable for 230V power supplies
- Automatic internal flashing on 230V
- Control board driven flashing on 24V
- Integrated dual-frequency antenna
- Supports compatible 433MHz radio systems
- Supports compatible 868MHz radio systems
- Antenna can receive both frequencies simultaneously
- Suitable for column, pillar or side mounting
- Modern compact Italian design
- IP54 protection rating
- Suitable for outdoor automation applications
- Suitable for swing gates, sliding gates and barriers
- Ideal for new and existing FAAC installations
- Genuine FAAC automation accessory
Specifications
- Manufacturer: FAAC
- Model: XLED
- Part Number: 410029
- Product Type: LED Flashing Warning Light
- Power Supply: 24V / 115V / 230V
- Number of LEDs: 40 High-Brightness LEDs
- Protection Rating: IP54
- Operating Temperature: -20°C to +55°C
- Dimensions: 135 x 55 x 165mm
- Integrated Antenna: Yes
- Radio Frequencies: 433MHz & 868MHz
- Recommended Antenna Cable: RG58
- Maximum Antenna Cable Length: 5m
- Installation: Column, Pillar or Side Mounting
Compatibility
Designed for use with compatible FAAC gate, barrier and access automation systems providing a suitable 24V, 115V or 230V flashing light output.
Suitable applications include compatible:
- FAAC swing gate automation systems
- FAAC sliding gate automation systems
- FAAC automatic barriers
- FAAC 24V automation controllers
- FAAC 230V automation controllers
- FAAC 433MHz radio systems
- FAAC 868MHz radio systems
Please confirm the flashing light output voltage and control requirements of the existing automation system before installation.
⚠️ Please Note
The FAAC XLED is a flashing warning device and does not replace photocells, safety edges or other required automation safety devices.
When operating at 230V, the XLED provides automatic internal flashing. When operating from a compatible 24V system, flashing is controlled by the electronic control board.
The integrated 433/868MHz antenna requires an appropriate connection to the compatible radio receiver if the antenna functionality is to be used.
This listing is for the FAAC XLED Flashing Light – Part No. 410029. Other automation equipment, receivers, coaxial cable and accessories are not included unless specifically stated.
Please confirm compatibility with your FAAC automation system before ordering.
