Description
FAAC B614 24Vdc Barrier Operator – 104614
The FAAC B614 is a high-performance 24V electromechanical barrier operator designed for residential, commercial and controlled vehicle access applications.
Featuring a powerful 24V motor, integrated encoder, continuous-duty operation and the dedicated FAAC E614 electronic control board, the B614 provides fast, smooth and highly configurable vehicle access control.
Its modular design allows the barrier operator to be configured with the appropriate boom, balancing spring and accessories to suit the individual installation.
This listing is for the FAAC B614 barrier operator only. Boom, spring, boom bracket and other installation components are available separately or as part of our complete B614 barrier kits.
FAAC Part Number: 104614
🚧 Automatic Vehicle Barrier Operator
The FAAC B614 is specifically designed for controlling vehicle access at residential and commercial entrances.
Typical applications include:
- Residential complexes
- Apartment buildings
- Strata properties
- Commercial car parks
- Office buildings
- Business premises
- Private roads
- Controlled vehicle entrances
- Light industrial properties
- Staff parking areas
The B614 can be combined with a wide range of FAAC and compatible access control and safety equipment to create a complete automated barrier system.
⚡ 24V Electromechanical Operation
The FAAC B614 uses a powerful 24V brushed DC motor.
FAAC specifies:
- Incoming power supply: 220–240V AC, 50/60Hz
- Electric motor: 24V DC brushed
- Maximum power: 165W
- Maximum torque: 300Nm
The low-voltage motor allows precise electronic management of barrier movement, speed, acceleration, deceleration and obstacle detection.
🏎️ Fast Opening
The B614 is designed to minimise waiting time at vehicle entrances.
With an appropriate 3 metre boom configuration, FAAC specifies an opening time of:
- Less than 2 seconds through 80°
This makes the B614 particularly suitable for entrances experiencing frequent vehicle traffic where fast access is important.
Actual movement time depends on the boom length, accessories fitted to the boom, balancing configuration and programmed operating parameters.
♾️ Continuous-Duty Operation
FAAC specifies the B614 for continuous use.
This provides excellent operating capacity for frequently used vehicle entrances where a conventional percentage-duty operator may not be appropriate.
Continuous-duty capability makes the B614 particularly suitable for:
- Apartment car parks
- Commercial car parks
- Shared residential entrances
- Staff parking facilities
- High-use private entrances
- Controlled commercial access points
🧠 Integrated E614 Control Board
The FAAC B614 incorporates the dedicated E614 electronic control board within the barrier cabinet.
The board is positioned in the upper section of the cabinet for convenient access during installation, programming and servicing.
The E614 features an onboard display and programming controls and provides extensive configuration of the barrier system.
Functions include:
- Programmable operating logic
- Adjustable pause time
- Opening force adjustment
- Closing force adjustment
- Opening speed adjustment
- Closing speed adjustment
- Electronic slowdown
- Service cycle counter
- Maintenance request programming
- Pre-flashing
- Warning light output
- Programmable outputs
- Boom lighting control
- Traffic light control
- Safety device management
- Battery operation
- Primary/Secondary barrier operation
🎛️ Adjustable Speed & Force
The E614 provides extensive electronic adjustment of barrier movement.
FAAC provides multiple levels of motor force and operating speed adjustment, allowing the installer to configure the barrier according to the boom, balancing arrangement and requirements of the installation.
This allows the B614 to provide smooth movement across a range of barrier configurations.
🎯 Integrated Encoder
The B614 motor incorporates an incremental encoder.
The encoder continuously provides movement feedback to the electronic control system, allowing accurate management of the barrier throughout its operating cycle.
Encoder feedback assists with:
- Barrier movement monitoring
- Electronic obstacle detection
- Anti-crushing functionality
- Motor force management
- Speed management
- Controlled deceleration
- Automatic reversal when an obstacle is detected
Appropriate external safety devices must still be incorporated into the complete barrier installation.
🛑 Controlled Deceleration
The B614 incorporates electronic and mechanical systems to provide controlled movement as the boom approaches its final positions.
Controlled deceleration helps reduce:
- Mechanical shock
- Boom vibration
- Transmission stress
- Operating noise
- Wear on barrier components
This contributes to smooth and controlled operation during frequent use.
⚙️ Heavy-Duty Transmission
The B614 incorporates a robust electromechanical gearmotor and transmission system.
FAAC uses a quadrilateral lever arrangement with two reduction stages to provide smooth and controlled transfer of motor power to the barrier boom.
The transmission is designed to provide:
- Smooth boom movement
- Efficient transfer of motor torque
- Controlled acceleration
- Controlled deceleration
- Reliable mechanical operation
- Long service life
🔄 Left or Right-Hand Configuration
The FAAC B614 uses a universal barrier cabinet that can be configured for either left-hand or right-hand operation.
This allows the same operator to be adapted according to the layout of the vehicle entrance.
The appropriate boom, spring and balancing arrangement must be selected for the required configuration.
🔋 Optional Battery Backup
The B614 supports optional battery backup.
When appropriate FAAC battery equipment is installed, the barrier can continue to provide limited operation during a mains power failure.
Battery operation can be configured through the E614 control board.
Battery backup equipment is available separately.
📡 FAAC Radio Compatibility
The E614 provides connectivity for compatible FAAC plug-in radio receiver modules.
This allows the barrier to be operated using compatible FAAC remote transmitters without requiring a separate external receiver enclosure.
Radio receiver modules and transmitters are available separately.
🔗 BUS 2easy Compatible
The E614 supports FAAC BUS 2easy accessories.
BUS 2easy allows compatible safety and control devices to communicate with the control board using a simplified two-wire connection.
Compatible equipment can include appropriate:
- FAAC photocells
- Safety devices
- Control accessories
This simplifies wiring while providing communication between compatible FAAC devices and the barrier control system.
🚦 Optional Traffic Light
The B614 can be configured with an optional high-visibility red and green traffic light.
The traffic light can be controlled by the E614 to provide a clear visual indication of the barrier status.
This is particularly useful for:
- Commercial car parks
- Controlled vehicle entrances
- Shared access points
- One-way traffic systems
- High-traffic entrances
Traffic light equipment is available separately.
💡 Optional Boom LED Lighting
Compatible B614 boom configurations can be equipped with LED lighting.
The E614 provides control functionality for appropriate boom lighting systems.
LED illumination can improve boom visibility during:
- Night operation
- Poor weather
- Low-light conditions
- Underground car park operation
Reflective boom markings can also be used to increase visibility.
🔁 Primary / Secondary Operation
The E614 supports Primary/Secondary operation.
This allows two appropriately configured barriers to operate together where opposing boom barriers are required.
This can be useful for particularly wide vehicle entrances or installations requiring two synchronised barrier operators.
🔑 Manual Release
The B614 incorporates a manual release system allowing the barrier mechanism to be disengaged when required.
Manual release may be required during:
- Power failures
- System faults
- Servicing
- Maintenance
- Emergency situations
The release mechanism should remain readily accessible following installation.
🏗️ Robust Steel Cabinet
The FAAC B614 uses a heavy-duty steel cabinet designed for external barrier installations.
The cabinet incorporates corrosion protection and a durable powder-coated finish suitable for outdoor vehicle access applications.
The internal control equipment is positioned toward the top of the cabinet to improve accessibility during installation and future servicing.
🌦️ Outdoor Installation
The B614 is designed for external vehicle access installations.
FAAC specifies:
- Operating temperature: -20°C to +55°C
- Barrier protection rating: IP44
- E614 control equipment protection: IP55
- Operator weight: approximately 40kg
Correct foundation preparation, drainage, electrical installation and earthing are essential for reliable long-term operation.
📦 What’s Included
This listing includes:
- 1 × FAAC B614 24Vdc Barrier Operator – 104614
- Integrated 24V Electromechanical Gearmotor
- Integrated FAAC E614 Electronic Control Board
- Internal Transmission Assembly
- Manual Release System
This listing is for the barrier operator only.
The following components are not included and are available separately or as part of a complete B614 kit:
- Barrier boom
- Boom mounting bracket
- Balancing spring
- Additional spring hardware where required
- Foundation plate
- Radio receiver
- Remote transmitters
- Photocells
- Traffic light
- Boom LED lighting
- Boom support
- Safety devices
- Battery backup
- Access control equipment
Key Features
- Genuine FAAC barrier operator
- FAAC Part Number: 104614
- Model: B614
- Barrier operator only
- 24V electromechanical operation
- 165W maximum power
- 300Nm maximum torque
- Fast barrier operation
- Continuous-duty operation
- Integrated FAAC E614 control board
- Integrated incremental encoder
- Electronic obstacle detection
- Anti-crushing functionality
- Controlled acceleration and deceleration
- Adjustable opening and closing speed
- Adjustable motor force
- BUS 2easy compatibility
- FAAC radio receiver compatibility
- Optional battery backup
- Optional traffic light control
- Optional boom LED lighting
- Primary/Secondary operation
- Universal left or right-hand configuration
- Heavy-duty steel cabinet
- Manual release system
- Designed for residential and commercial vehicle access
- Configurable with different boom and balancing arrangements
Specifications
- Manufacturer: FAAC
- Brand: FAAC
- Model: B614
- Part Number: 104614
- Product Type: Automatic Barrier Operator
- Application: Residential / Commercial Vehicle Access
- Incoming Power Supply: 220–240V AC, 50/60Hz
- Electric Motor: 24V DC Brushed
- Maximum Power: 165W
- Maximum Torque: 300Nm
- Opening Time: Less than 2 seconds at 80° with appropriate 3m boom
- Use Frequency: Continuous
- Encoder: Incremental, Integrated in Motor
- Deceleration: Electronic + Mechanical
- Electronic Control Board: FAAC E614
- Speed Adjustment: Electronic
- Force Adjustment: Electronic
- BUS 2easy: Yes
- Radio Receiver: Optional
- Battery Backup: Optional
- Left / Right Configuration: Yes
- Cabinet Material: Steel
- Operating Temperature: -20°C to +55°C
- Barrier Protection Rating: IP44
- Control Equipment Protection Rating: IP55
- Weight: Approx. 40kg
Compatibility
The FAAC B614 104614 operator can be configured with appropriate B614 components and accessories including:
- FAAC B614 barrier booms
- FAAC B614 boom mounting hardware
- FAAC B614 balancing springs
- FAAC B614 foundation plate
- FAAC radio receivers
- Compatible FAAC transmitters
- FAAC BUS 2easy photocells
- Conventional photocells
- Traffic light systems
- Boom LED lighting
- Safety loops and loop detectors
- Boom supports
- Safety devices
- Key switches
- Intercom systems
- Card readers
- Keypads
- Wired access control equipment
- Optional battery backup equipment
The correct boom, spring and balancing arrangement must be selected according to the required barrier configuration.
🧩 Build the B614 to Suit the Installation
The FAAC B614 is a modular barrier system.
Part number 104614 provides the core barrier operator, while the boom and balancing components can be selected separately according to the requirements of the entrance.
This allows the operator to be configured with the appropriate:
- Boom length
- Boom type
- Balancing spring
- Boom support
- Lighting
- Safety equipment
- Access control equipment
Complete FAAC B614 barrier kits are also available separately for customers requiring a complete matched package.
⚠️ Please Note
This listing is for FAAC part number 104614, the FAAC B614 24Vdc Barrier Operator only.
A barrier boom is not included.
The boom bracket, balancing spring, foundation plate and other boom installation components are not included with this listing.
Complete FAAC B614 barrier kits are available separately, including configurations for longer boom applications.
The correct boom and balancing spring configuration must be selected according to the required boom length and any accessories fitted to the boom.
The B614 is designed for controlling vehicle access. Appropriate safety devices must be incorporated into the complete barrier installation according to the application and installation requirements.
If you are unsure which components are required to configure your FAAC B614 barrier, contact our Technical Support team on 1300 733 066.
