Description
The EvoLoop Radar Loop Detector is an advanced vehicle and pedestrian detection sensor designed to replace traditional in-ground induction loops in automatic vehicle barrier systems.
Using 60GHz FMCW radar technology, the EvoLoop creates configurable virtual detection zones without requiring saw-cutting, underground cabling or installation of induction loops beneath the road surface.
With a wide 140° detection field, a maximum detection range of up to 7 metres and the ability to configure up to three independent virtual loops, the EvoLoop provides a flexible solution for vehicle activation, presence detection and barrier safety.
Ideal for commercial car parks, industrial entrances, access-controlled facilities and automated vehicle barriers, the EvoLoop combines advanced radar technology with convenient Bluetooth smartphone configuration.
🚗 Replace Traditional In-Ground Induction Loops
The EvoLoop provides a modern alternative to conventional inductive vehicle loop detectors.
Traditional induction loops require a cable to be installed beneath the road surface, typically involving saw-cutting, cable installation and sealing.
The EvoLoop eliminates this requirement by detecting vehicles using radar technology.
Benefits include:
- No road cutting required
- No underground induction loop cable
- Reduced installation time
- No disturbance to existing road surfaces
- Suitable for concrete, asphalt and gravel surfaces
- Ideal for existing vehicle barrier installations
- Easier configuration and adjustment
- Reduced dependence on underground detection infrastructure
This makes the EvoLoop particularly useful where roadworks are expensive, impractical or undesirable.
📡 Advanced 60GHz Radar Detection
The EvoLoop uses Frequency Modulated Continuous Wave (FMCW) radar technology to detect objects within its configured detection field.
The sensor measures radar reflections to identify the presence and movement of vehicles and pedestrians.
Unlike conventional induction loops, which rely on changes in electromagnetic induction caused by metallic vehicles, the EvoLoop can be configured to detect different target types.
Key detection specifications include:
- Radar Technology: 60GHz FMCW
- Maximum Detection Range: Up to 7 Metres
- Horizontal Detection Field: 140°
- Vertical Detection Field: 40°
- Adjustable Antenna Angle: -20° to +20°
- Detection Types: Presence and Protection
The detection area can be configured to suit the installation.
🎯 Up to Three Independent Virtual Loops
One of the EvoLoop’s main advantages is the ability to create up to three independently configurable virtual detection loops.
Each virtual loop represents a defined detection zone within the radar’s field of view.
These zones can be configured for different functions, including vehicle activation and presence protection.
Typical applications include:
- Vehicle approach detection
- Barrier opening activation
- Vehicle presence monitoring
- Barrier closing control
- Detection beneath the barrier arm
- Pedestrian protection
- Vehicle exit detection
The independent zones allow one sensor to perform multiple detection functions that would otherwise require separate detection devices.
🚦 Automatic Vehicle Barrier Control
The EvoLoop is designed for integration with compatible automatic boom barrier systems.
It can provide detection signals to the barrier controller to support opening, closing and safety functions.
Typical applications include:
- Commercial car park barriers
- Industrial vehicle entrances
- Secure parking facilities
- Ticketed parking systems
- Toll access systems
- Residential complex vehicle barriers
- Warehouse vehicle access
- Commercial entry and exit lanes
The EvoLoop can also provide activation signals for compatible ticketing and licence plate recognition systems.
🛡️ Vehicle & Pedestrian Protection
The EvoLoop can be configured to monitor areas where vehicles or pedestrians may be exposed to a moving barrier arm.
Its protection zones are designed to detect objects within the programmed area and provide an appropriate signal to the barrier control system.
Applications include:
- Monitoring vehicles beneath the boom arm
- Detecting pedestrians near the barrier
- Helping prevent the barrier closing onto an obstruction
- Maintaining vehicle presence detection
- Supporting safer automatic barrier operation
The EvoLoop is designed for protection applications conforming to EN 12453 Type D when installed and configured according to the applicable requirements.
The barrier controller must support the required safety input and monitoring functions.
📱 Bluetooth Smartphone Configuration
The EvoLoop features integrated Bluetooth connectivity for convenient configuration using the dedicated EvoLoop mobile application.
The application allows installers to configure the virtual detection zones without physically modifying underground loops.
Available configuration functions include:
- Automatic environment teach-in
- Virtual loop setup
- Detection zone adjustment
- Target type selection
- Directional detection settings
- Live detection visualisation
- Diagnostic information
- Configuration management
This allows the detection arrangement to be adapted to the site during installation and commissioning.
↔️ Directional Vehicle Detection
The EvoLoop supports directional detection settings.
This allows the system to distinguish between vehicles approaching from different directions and apply detection filters according to the configured application.
For example, an installation may require the barrier to respond to vehicles approaching the entrance while ignoring vehicles travelling in another direction.
Directional detection can help reduce unwanted activation caused by nearby or crossing traffic.
Correct configuration depends on the road layout and vehicle movement patterns.
🌧️ Reliable Outdoor Operation
The EvoLoop is designed for outdoor installation and operation in challenging environmental conditions.
Its radar technology provides reliable detection in environments where optical sensors may be affected by visibility conditions.
The sensor is designed for operation in conditions including:
- Rain
- Fog
- Dust
- Humidity
- Frost
- Snow
- Temperature variations
With an IP65-rated enclosure, the EvoLoop is suitable for appropriately installed outdoor applications.
🔧 Simple Installation Without Roadworks
The EvoLoop is mounted above the road surface in a suitable position on or near the automatic barrier.
Once mechanically secured and electrically connected, the sensor can be configured through the smartphone application.
Typical installation steps include:
- Mount the EvoLoop in the correct position.
- Connect the power supply and detection outputs.
- Establish Bluetooth communication with the sensor.
- Perform the environment teach-in procedure.
- Configure the required virtual detection loops.
- Assign the required detection and output functions.
- Test vehicle and pedestrian detection.
- Verify correct barrier operation and safety responses.
The manufacturer’s recommended mounting height is approximately 300–700mm above the road surface, depending on the installation.
The radar must have a suitable field of view covering the intended detection area.
🔌 Flexible Power Supply & Outputs
The EvoLoop supports low-voltage AC or DC power supplies commonly used in automation installations.
Electrical specifications include:
- DC Supply: 12–30V DC ±10%
- AC Supply: 12–24V AC ±10%
- Maximum Power Consumption: Less Than 3W
- Peak Start-Up Current: 1.3A
- Outputs: 2 Electronic Relays and 1 Additional Relay
- Test Input: 1 Optically Isolated Input
- Standard Cable Length: 3 Metres
The outputs allow the EvoLoop to interface with compatible vehicle barrier controllers and external access control equipment.
Controller compatibility and the required wiring arrangement must be verified before installation.
🏗️ Ideal for New Installations & Retrofits
The EvoLoop is suitable for new automatic barrier installations and upgrades to existing vehicle detection systems.
It is particularly useful where traditional induction loops are difficult to install or maintain.
Typical retrofit applications include:
- Replacement of damaged induction loops
- Car parks with existing concrete surfaces
- Asphalt driveways
- Gravel access roads
- Industrial entrances
- Commercial boom barrier upgrades
- Sites requiring additional detection zones
- Installations requiring pedestrian and vehicle monitoring
The EvoLoop can reduce the need for disruptive civil works when upgrading existing access systems.
⭐ Key Features
- Advanced EvoLoop Radar Loop Detector
- Alternative to traditional in-ground induction loops
- 60GHz FMCW radar technology
- Maximum detection range up to 7 metres
- Wide 140° horizontal detection field
- 40° vertical detection field
- Up to three independently configurable virtual loops
- Vehicle and pedestrian detection
- Presence and protection functions
- Directional detection filtering
- Bluetooth smartphone configuration
- Automatic environment teach-in
- Live detection visualisation
- Compatible barrier activation outputs
- Suitable for ticketing and licence plate recognition systems
- No road cutting required
- No underground loop installation
- Suitable for outdoor environments
- IP65-rated enclosure
- Low power consumption
- 12–30V DC or 12–24V AC operation
- Standard 3-metre connection cable
- Ideal for commercial and industrial vehicle barriers
🔧 Specifications
- Product: EvoLoop Radar Loop Detector
- Manufacturer: BEA
- Product Type: Radar Vehicle Detection Sensor
- Detection Technology: FMCW Microwave Radar
- Operating Frequency: 60GHz
- Maximum Detection Range: Up to 7m
- Horizontal Field of View: 140°
- Vertical Field of View: 40°
- Antenna Adjustment: -20° to +20°
- Virtual Detection Zones: Up to 3
- Detection Functions: Presence and Protection
- DC Supply Voltage: 12–30V DC ±10%
- AC Supply Voltage: 12–24V AC ±10%
- Maximum Power Consumption: Less Than 3W
- Peak Start-Up Current: 1.3A
- Typical Response Time: 100ms
- Maximum Response Time: 250ms
- Outputs: 2 Electronic Relays and 1 Relay
- Test Input: Optically Isolated
- Communication: Bluetooth
- Standard Cable Length: 3m
- Protection Rating: IP65
- Operating Temperature: -25°C to +55°C
- Dimensions: 150mm (H) × 50mm (W) × 68mm (D)
- Housing Material: PC / ASA / Aluminium
- Colour: Black
- Application: Automatic Vehicle Barrier Detection
🔗 Compatibility
Suitable Applications
- Automatic Boom Barriers
- Commercial Vehicle Access Systems
- Industrial Vehicle Barriers
- Car Park Entry and Exit Systems
- Parking Ticketing Systems
- Licence Plate Recognition Systems
- Secure Vehicle Access Points
- Compatible Barrier Control Systems
Detection Applications
- Vehicle Approach Detection
- Vehicle Presence Detection
- Barrier Activation
- Barrier Protection
- Pedestrian Detection
- Directional Traffic Detection
- Virtual Induction Loop Replacement
Controller Requirements
The connected automation system must provide:
- A compatible low-voltage power supply
- Suitable activation or safety inputs
- Compatible relay interface connections
- Appropriate safety monitoring where required
Compatibility with individual barrier brands and controller models must be confirmed before installation.
⚠️ Please Note
This product is the EvoLoop Radar Loop Detector.
Designed primarily for automatic vehicle barrier detection applications.
IMPORTANT: The EvoLoop is a radar-based virtual loop sensor and does not require an induction loop to be installed beneath the road surface.
The maximum detection range of 7 metres depends on the installation environment, target characteristics and configuration.
The sensor supports up to three virtual detection zones, but the number and arrangement used depend on the application.
The EvoLoop requires a compatible low-voltage power supply and suitable controller inputs.
It is not a standalone barrier controller and does not directly operate a barrier motor without compatible control equipment.
IMPORTANT: Although the EvoLoop supports vehicle and pedestrian protection functions, correct safety operation depends on the complete barrier system, installation and commissioning.
Do not assume compatibility with sliding gate operators, sectional garage door operators or industrial roller shutter controllers without verifying the specific application and controller requirements.
Additional mounting brackets, protective housings or other installation accessories may be required depending on the installation.
Installation and commissioning should be performed by an experienced automation technician.
For assistance selecting the correct vehicle detection equipment for your automatic barrier installation, contact our Technical Support team on 1300 733 066.





