Description
The Centsys Vantage 400 Single Swing Gate Automation Kit is a complete automatic swing gate system designed for residential and suitable light commercial applications.
Featuring a powerful 12V DC linear operator with a 400mm piston stroke, the Vantage 400 delivers smooth, controlled gate movement with intelligent electronic operation and convenient remote access.
This kit combines the Centsys Vantage 400 linear operator with the VX SMART control system, providing an integrated solution for automating a single swing gate leaf.
The included VX SMART wallbox features a 240V mains input, integrated controller, multichannel wireless receiver, 1.8A switch-mode battery charger and mains isolator.
Two genuine four-button transmitters and a 12V 7.2Ah sealed maintenance-free battery are also included.
With adjustable operating parameters, electronic obstacle detection, programmable access control functions and battery backup capability, the Vantage 400 provides a practical automation solution for single-leaf swing gates.
⚙️ Complete Single Swing Gate Automation Kit
The Vantage 400 kit includes the essential motor, controller, power supply and access control components required for a typical single swing gate installation.
Unlike operator-only configurations, this package includes the VX SMART control wallbox, battery and remote controls.
The kit is designed for installations where a suitable 240V mains supply is available at the control wallbox.
Benefits include:
- Complete single swing gate automation package
- 12V DC linear piston-drive operator
- 400mm operator stroke
- VX SMART control wallbox
- Integrated multichannel wireless receiver
- Two genuine four-button transmitters
- 12V 7.2Ah sealed maintenance-free battery
- Integrated 1.8A switch-mode charger
- Integrated mains isolator
- Battery backup capability
- Mounting brackets and hardware included
🚪 Vantage 400 Linear Swing Gate Operator
The Centsys Vantage 400 is a 12V DC linear actuator designed to automate a hinged swing gate.
Its piston-drive mechanism extends and retracts to open and close the gate leaf through the operator’s mounting points.
The 400mm stroke provides the actuator travel required for suitable gate geometries.
Features include:
- 12V DC motor operation
- Linear piston-drive mechanism
- 400mm piston stroke
- Controlled opening and closing movement
- Suitable for single-leaf swing gates
- Durable actuator construction
- Compatible with the included VX SMART control system
- Mounting brackets and associated hardware included
The operator must be installed using mounting positions and geometry appropriate to the gate and hinge arrangement.
Gate dimensions, weight, wind exposure and mounting geometry must be checked against the manufacturer’s installation requirements.
🧠 VX SMART Control System
The included VX SMART wallbox provides the central electronic control system for the Vantage 400 operator.
The wallbox incorporates the controller, multichannel receiver, charging equipment and mains isolation components in one assembly.
Included wallbox features:
- VX SMART electronic controller
- 240V AC mains input
- Integrated multichannel wireless receiver
- Two four-button transmitters
- 1.8A switch-mode battery charger
- Integrated mains isolator
- Enclosed control assembly
The SMART controller manages gate movement and provides programmable functions for supported operating and safety requirements.
📱 SMART Programming & Configuration
The VX SMART system provides programmable control of the swing gate operator.
Supported configuration functions allow the installer to tailor gate operation to the installation.
Features may include:
- Initial operator setup
- Gate travel configuration
- Operating parameter adjustment
- Pedestrian access settings
- Automatic closing configuration
- Safety input configuration
- Remote-control programming
- Diagnostic and operating information
Available programming methods and individual settings depend on the VX SMART controller version and firmware.
⚡ 240V Mains Supply with Integrated Charger
The VX SMART wallbox is designed for a standard 240V AC mains supply.
It incorporates a 1.8A switch-mode charger to support the operator’s 12V battery system.
Power system features include:
- 240V AC mains input
- Integrated 1.8A switch-mode charger
- 12V DC operator system
- Integrated mains isolator
- Battery charging functionality
- Battery backup capability
The integrated charger eliminates the need to purchase a separate external charger for this kit configuration.
All mains electrical connections must be completed in accordance with applicable electrical requirements.
🔋 Includes 12V 7.2Ah Backup Battery
The kit includes one 12V 7.2Ah sealed maintenance-free battery.
The battery supplies the 12V DC motor system and provides backup capability during mains power interruptions.
Included battery specifications:
- Quantity: 1
- Part Number: A-CP4C2
- Voltage: 12V DC
- Capacity: 7.2Ah
- Type: Sealed Maintenance-Free Battery
Benefits include:
- Battery supplied with the kit
- Compatible with the Vantage 400 system
- Supports battery-driven operator movement
- Provides backup capability during power interruptions
- Charging supported by the VX SMART wallbox
Battery backup operating time depends on gate loading, operating frequency, battery condition and environmental conditions.
📡 Integrated Multichannel Receiver
The VX SMART wallbox includes an integrated multichannel wireless receiver for compatible remote-control operation.
The receiver allows authorised transmitters to activate supported gate functions.
Benefits include:
- Integrated wireless receiver
- Remote gate operation
- Multichannel access control
- Programmable transmitter functions
- Support for additional compatible transmitters
A separate receiver is not required for standard operation using the two included transmitters.
🎮 Includes Two Four-Button Transmitters
The VX SMART wallbox package includes two genuine Centsys four-button transmitters.
The transmitters provide convenient wireless operation of the gate and supported access control functions.
Features include:
- 2 × four-button transmitters
- Four programmable buttons per transmitter
- Wireless gate operation
- Compatible with the included multichannel receiver
- Suitable for everyday residential access
Additional compatible transmitters can be programmed as required.
🛡️ Intelligent Gate Safety Functions
The VX SMART controller provides electronic control functions designed to support safe and reliable gate movement.
Supported safety functions may include:
- Electronic obstacle detection
- Programmable safety responses
- Compatible photoelectric safety inputs
- Gate movement monitoring
- Safety device integration
Correctly installed external safety devices are important for reducing the risk of contact with moving gates.
Electronic obstacle detection does not replace the need for appropriate photoelectric safety beams or other protective devices.
🚶 Pedestrian Access & Automatic Closing
The VX SMART control system supports configurable access functions for suitable swing gate installations.
Pedestrian opening allows a gate to be operated for convenient pedestrian access without requiring a separate pedestrian gate.
Typical applications include:
- Residential pedestrian entry
- Visitor access
- Bicycle access
- Small deliveries
- Shared driveway entrances
Automatic closing may also be configured where supported and where the required safety devices are installed.
The exact functions available depend on the controller configuration.
🔓 Manual Release for Emergency Access
The Vantage 400 operator incorporates a manual release arrangement to allow the gate to be operated manually when required.
This is useful during maintenance, equipment faults or situations where powered operation is unavailable.
Manual release procedures must be performed according to the manufacturer’s instructions.
🔩 Mounting Brackets & Hardware Included
The Vantage 400 operator is supplied with its mounting brackets and associated hardware.
These components are used to secure the linear actuator between the gate support structure and the moving gate leaf.
Correct bracket positioning is essential for reliable operation.
Installation considerations include:
- Gate hinge position
- Post dimensions and construction
- Operator mounting geometry
- Gate opening angle
- Required actuator clearance
- Gate leaf strength
- Suitable mounting reinforcement
Additional fabrication or site-specific mounting materials may be required depending on the gate construction.
🏠 Residential & Light Commercial Applications
The Vantage 400 is suitable for a range of single-leaf swing gate installations.
Typical applications include:
- Residential driveway gates
- Single-leaf steel swing gates
- Aluminium swing gates
- Private property entrances
- Rural property access gates
- Suitable light commercial entrances
- Existing manual swing gate automation upgrades
The gate must be mechanically sound, correctly hinged and able to move freely before automation.
📦 What’s Included?
The Centsys Vantage 400 Single Swing Gate Automation Kit (A-VTG4S240KIT) contains:
| Qty | Part Number | Description |
|---|---|---|
| 1 | A-VANTG401V4_AU | Centsys Vantage 400 12V DC Linear Operator with Piston Drive – 400mm Stroke |
| 1 | A-VECCAD02V6_AU | VX SMART Wallbox – 240V Input |
| 1 | A-CP4C2 | 12V 7.2Ah Sealed Maintenance-Free Battery |
VX SMART Wallbox Includes
- VX SMART Electronic Controller
- Multichannel Wireless Receiver
- 2 × Four-Button Transmitters
- 1.8A Switch-Mode Battery Charger
- Mains Isolator
Vantage 400 Operator Includes
- Vantage 400 Linear Actuator
- Gate Mounting Brackets
- Associated Mounting Hardware
- Manual Release Mechanism
Not Included
- Photoelectric Safety Beams
- 240V Electrical Supply Installation
- Site-Specific Fabrication or Reinforcement
- Additional Access Control Accessories
- Installation Labour
⭐ Key Features
- Genuine Centsys Vantage 400 Single Swing Gate Automation Kit
- Manufacturer Kit SKU: A-VTG4S240KIT
- Designed for single-leaf swing gates
- 12V DC linear piston-drive operator
- 400mm actuator stroke
- Includes VX SMART control wallbox
- Standard 240V AC mains input
- Integrated multichannel wireless receiver
- Includes 2 × four-button transmitters
- Integrated 1.8A switch-mode battery charger
- Integrated mains isolator
- Includes 12V 7.2Ah sealed maintenance-free battery
- Battery backup capability
- Programmable gate control functions
- Electronic obstacle detection capability
- Support for compatible safety devices
- Pedestrian access functionality
- Automatic closing configuration where supported
- Manual release mechanism
- Mounting brackets and hardware included
- Suitable for residential and light commercial swing gates
🔧 Specifications
- Manufacturer: Centsys / Centurion Systems
- Kit Model: Vantage 400 Single Swing Gate Kit – 240V
- Kit SKU: A-VTG4S240KIT
- Operator Model: Vantage 400
- Operator SKU: A-VANTG401V4_AU
- Product Type: Single Swing Gate Automation Kit
- Gate Configuration: Single Leaf
- Operator Type: Linear Piston Drive
- Motor Voltage: 12V DC
- Actuator Stroke: 400mm
- Control System: VX SMART
- Wallbox SKU: A-VECCAD02V6_AU
- Mains Input: 240V AC
- Charger: Integrated 1.8A Switch-Mode
- Mains Isolator: Included
- Wireless Receiver: Integrated Multichannel Receiver
- Remote Controls Included: 2 × Four-Button Transmitters
- Battery Voltage: 12V DC
- Battery Capacity: 7.2Ah
- Battery Type: Sealed Maintenance-Free
- Battery SKU: A-CP4C2
- Battery Quantity: 1
- Battery Backup: Supported
- Mounting Brackets: Included
- Mounting Hardware: Included
- Manual Release: Yes
- Safety Device Support: Subject to Controller Compatibility
- Application: Residential & Suitable Light Commercial Swing Gates
🔗 Compatibility
Swing Gate Requirements
The Vantage 400 is designed for suitable single-leaf swing gates.
Installation suitability depends on:
- Gate leaf length
- Gate weight
- Hinge position
- Opening angle
- Gate construction
- Wind loading
- Mounting geometry
- Gate movement resistance
The 400mm actuator stroke must be suitable for the required gate opening geometry.
Gate dimensions and weight must be checked against the manufacturer’s rated operating limits before installation.
Compatible Remote Controls
The included VX SMART multichannel receiver supports compatible Centsys transmitters.
Two four-button transmitters are included.
Additional transmitters must be compatible with the receiver supplied in the VX SMART wallbox.
Compatible Safety Accessories
The VX SMART controller supports compatible external safety equipment, subject to its input configuration.
Photoelectric safety beams and other protective devices must be selected according to the installation requirements.
⚠️ Please Note
This product is the genuine Centsys Vantage 400 Single Swing Gate Automation Kit with 240V mains supply, SKU A-VTG4S240KIT.
The kit includes one Vantage 400 linear operator, one VX SMART wallbox and one 12V 7.2Ah sealed maintenance-free battery.
The VX SMART wallbox includes the electronic controller, multichannel receiver, two four-button transmitters, 1.8A switch-mode charger and mains isolator.
The Vantage 400 operator includes its mounting brackets and associated mounting hardware.
This is a single swing gate kit designed to automate one gate leaf.
The operator has a 400mm piston stroke. This is the actuator travel measurement and does not represent the maximum gate leaf length.
Maximum suitable gate dimensions and weight depend on the manufacturer’s specifications, gate construction and installation geometry.
Photoelectric safety beams and additional protective devices are not included.
The gate must be mechanically sound, correctly aligned and able to move freely before automation.
240V electrical connections must be completed by an appropriately licensed electrician.
Gate automation installation and commissioning must comply with Centsys instructions and applicable Australian safety requirements.
For assistance selecting compatible safety beams, remote controls or additional accessories, contact our Technical Support team on 1300 733 066.
