Description
The Centsys Vantage 400 Double Swing Gate Automation Kit is a complete automatic swing gate system designed for residential and suitable light commercial double-leaf gate installations.
Featuring two powerful 12V DC linear operators with 400mm piston strokes, the Vantage 400 provides smooth, controlled and coordinated movement of both swing gate leaves.
This complete automation package combines two Centsys Vantage 400 piston-drive operators with the advanced VX SMART control system, delivering intelligent dual-leaf gate automation with convenient wireless access control.
The included VX SMART wallbox features a 240V mains input, electronic controller, multichannel wireless receiver, 1.8A switch-mode battery charger and mains isolator.
Two genuine four-button transmitters and a 12V 7.2Ah sealed maintenance-free battery are also included.
Both Vantage 400 operators are supplied with their mounting brackets and associated mounting hardware.
With programmable operating parameters, electronic obstacle detection, pedestrian access functionality and battery backup capability, the Vantage 400 provides a comprehensive automation solution for double swing gate installations.
⚙️ Complete Double Swing Gate Automation Kit
The Vantage 400 Double Kit includes the essential operators, controller, power supply and access control components required for a typical double swing gate installation.
Unlike single-leaf automation systems, this kit includes two linear operators designed to automate both leaves of a double swing gate.
The VX SMART controller coordinates the operation of both motors, allowing the gate leaves to open and close according to the programmed operating sequence.
Benefits include:
- Complete double swing gate automation package
- 2 × 12V DC linear piston-drive operators
- 400mm stroke per operator
- VX SMART control wallbox
- Integrated multichannel wireless receiver
- Two genuine four-button transmitters
- 12V 7.2Ah sealed maintenance-free battery
- Integrated 1.8A switch-mode charger
- Integrated mains isolator
- Coordinated dual-leaf gate operation
- Battery backup capability
- Mounting brackets and hardware for both operators
🚪 Dual Vantage 400 Linear Swing Gate Operators
The Centsys Vantage 400 is a 12V DC linear actuator designed to automate a hinged swing gate leaf.
This double kit includes two identical operators, allowing each leaf of the gate to be independently driven by its own actuator.
The piston-drive mechanism extends and retracts to open and close the gate through the operator’s mounting points.
Each operator provides a 400mm stroke.
Features include:
- Two 12V DC linear actuators
- Piston-drive operating mechanism
- 400mm actuator stroke per motor
- Controlled opening and closing movement
- Coordinated double-leaf operation
- Compatible with the included VX SMART controller
- Mounting brackets and hardware for both motors
- Suitable for appropriate double swing gate installations
The operators must be installed using mounting positions and geometry appropriate to each gate leaf and hinge arrangement.
Gate dimensions, weight, wind exposure and mounting geometry must be checked against the manufacturer’s installation requirements.
🔄 Coordinated Double-Leaf Gate Operation
The VX SMART controller manages the operation of both Vantage 400 motors to provide coordinated opening and closing of the double swing gate.
Dual-leaf operation allows the controller to manage the movement of each gate leaf according to the configured operating sequence.
Features include:
- Coordinated opening of both gate leaves
- Coordinated closing of both gate leaves
- Programmable operating sequence
- Individual motor control through the controller
- Configurable gate movement parameters
- Support for pedestrian access functions
- Electronic safety monitoring
Correct gate sequencing is particularly important where the two leaves overlap or use a mechanical closing arrangement.
The system must be configured according to the gate design and manufacturer’s installation requirements.
🧠 VX SMART Control System
The included VX SMART wallbox provides the central electronic control system for both Vantage 400 operators.
The wallbox incorporates the controller, multichannel receiver, charging equipment and mains isolation components in one assembly.
Included wallbox features:
- VX SMART electronic controller
- 240V AC mains input
- Integrated multichannel wireless receiver
- Two four-button transmitters
- 1.8A switch-mode battery charger
- Integrated mains isolator
- Enclosed control assembly
The SMART controller manages both gate motors and provides programmable functions for supported operating and safety requirements.
📱 SMART Programming & Configuration
The VX SMART system provides programmable control of the double swing gate operators.
Supported configuration functions allow the installer to tailor the operation of both gate leaves to the installation.
Features may include:
- Initial dual-motor setup
- Gate travel configuration
- Opening and closing sequence settings
- Operating parameter adjustment
- Pedestrian access settings
- Automatic closing configuration
- Safety input configuration
- Remote-control programming
- Diagnostic and operating information
Available programming methods and individual settings depend on the VX SMART controller version and firmware.
⚡ 240V Mains Supply with Integrated Charger
The VX SMART wallbox is designed for a standard 240V AC mains supply.
It incorporates a 1.8A switch-mode charger to support the system’s 12V battery supply.
Power system features include:
- 240V AC mains input
- Integrated 1.8A switch-mode charger
- 12V DC operator system
- Integrated mains isolator
- Battery charging functionality
- Battery backup capability
The integrated charger eliminates the need to purchase a separate external charger for this kit configuration.
All mains electrical connections must be completed in accordance with applicable electrical requirements.
🔋 Includes 12V 7.2Ah Backup Battery
The kit includes one 12V 7.2Ah sealed maintenance-free battery.
The battery supports the 12V DC motor system and provides backup capability during mains power interruptions.
Included battery specifications:
- Quantity: 1
- Part Number: A-CP4C2
- Voltage: 12V DC
- Capacity: 7.2Ah
- Type: Sealed Maintenance-Free Battery
Benefits include:
- Battery supplied with the kit
- Compatible with the Vantage 400 system
- Supports battery-driven motor operation
- Provides backup capability during power interruptions
- Charging supported by the VX SMART wallbox
Battery backup operating time depends on gate loading, operating frequency, battery condition and environmental conditions.
Operating two gate motors places different demands on the battery system compared with a single-motor installation.
📡 Integrated Multichannel Receiver
The VX SMART wallbox includes an integrated multichannel wireless receiver for compatible remote-control operation.
The receiver allows authorised transmitters to activate supported gate functions.
Benefits include:
- Integrated wireless receiver
- Remote operation of both gate leaves
- Multichannel access control
- Programmable transmitter functions
- Support for additional compatible transmitters
A separate receiver is not required for standard operation using the two included transmitters.
🎮 Includes Two Four-Button Transmitters
The VX SMART wallbox package includes two genuine Centsys four-button transmitters.
The transmitters provide convenient wireless operation of the double swing gate and supported access control functions.
Features include:
- 2 × four-button transmitters
- Four programmable buttons per transmitter
- Wireless gate operation
- Compatible with the included multichannel receiver
- Suitable for everyday residential access
Additional compatible transmitters can be programmed as required.
🛡️ Intelligent Gate Safety Functions
The VX SMART controller provides electronic control functions designed to support safe and reliable operation of both swing gate leaves.
Supported safety functions may include:
- Electronic obstacle detection
- Programmable safety responses
- Compatible photoelectric safety inputs
- Gate movement monitoring
- Safety device integration
Correctly installed external safety devices are important for reducing the risk of contact with moving gates.
Electronic obstacle detection does not replace the need for appropriate photoelectric safety beams or other protective devices.
🚶 Pedestrian Access & Automatic Closing
The VX SMART control system supports configurable access functions for suitable double swing gate installations.
Pedestrian opening may allow one gate leaf to operate independently, providing convenient pedestrian access without opening both leaves.
Typical applications include:
- Residential pedestrian entry
- Visitor access
- Bicycle access
- Small deliveries
- Shared driveway entrances
Automatic closing may also be configured where supported and where the required safety devices are installed.
The exact functions available depend on the controller configuration.
🔓 Manual Release for Emergency Access
Each Vantage 400 operator incorporates a manual release arrangement to allow the corresponding gate leaf to be operated manually when required.
This is useful during maintenance, equipment faults or situations where powered operation is unavailable.
Manual release procedures must be performed according to the manufacturer’s instructions.
🔩 Mounting Brackets & Hardware Included
Both Vantage 400 operators are supplied with their mounting brackets and associated hardware.
These components are used to secure each linear actuator between the gate support structure and the corresponding moving gate leaf.
Correct bracket positioning is essential for reliable operation.
Installation considerations include:
- Gate hinge positions
- Post dimensions and construction
- Operator mounting geometry
- Gate opening angles
- Required actuator clearances
- Gate leaf strength
- Suitable mounting reinforcement
- Clearance between both gate leaves
Additional fabrication or site-specific mounting materials may be required depending on the gate construction.
🏠 Residential & Light Commercial Applications
The Vantage 400 Double Kit is suitable for a range of double-leaf swing gate installations.
Typical applications include:
- Residential driveway gates
- Double-leaf steel swing gates
- Aluminium swing gates
- Private property entrances
- Rural property access gates
- Suitable light commercial entrances
- Existing manual double swing gate automation upgrades
Both gate leaves must be mechanically sound, correctly hinged and able to move freely before automation.
📦 What’s Included?
The Centsys Vantage 400 Double Swing Gate Automation Kit (A-VTG4D240KIT) contains:
| Qty | Part Number | Description |
|---|---|---|
| 2 | A-VANTG401V4_AU | Centsys Vantage 400 12V DC Linear Operator with Piston Drive – 400mm Stroke |
| 1 | A-VECCAD02V6_AU | VX SMART Wallbox – 240V Input |
| 1 | A-CP4C2 | 12V 7.2Ah Sealed Maintenance-Free Battery |
VX SMART Wallbox Includes
- VX SMART Electronic Controller
- Multichannel Wireless Receiver
- 2 × Four-Button Transmitters
- 1.8A Switch-Mode Battery Charger
- Mains Isolator
Vantage 400 Operators Include
- 2 × Vantage 400 Linear Actuators
- Mounting Brackets for Both Operators
- Associated Mounting Hardware for Both Operators
- Manual Release Mechanisms
Not Included
- Photoelectric Safety Beams
- 240V Electrical Supply Installation
- Site-Specific Fabrication or Reinforcement
- Additional Access Control Accessories
- Installation Labour
⭐ Key Features
- Genuine Centsys Vantage 400 Double Swing Gate Automation Kit
- Manufacturer Kit SKU: A-VTG4D240KIT
- Designed for double-leaf swing gates
- Includes 2 × 12V DC linear piston-drive operators
- 400mm actuator stroke per operator
- Coordinated dual-leaf gate operation
- Includes VX SMART control wallbox
- Standard 240V AC mains input
- Integrated multichannel wireless receiver
- Includes 2 × four-button transmitters
- Integrated 1.8A switch-mode battery charger
- Integrated mains isolator
- Includes 12V 7.2Ah sealed maintenance-free battery
- Battery backup capability
- Programmable gate control functions
- Electronic obstacle detection capability
- Support for compatible safety devices
- Pedestrian access functionality
- Automatic closing configuration where supported
- Manual release mechanisms
- Mounting brackets and hardware for both operators
- Suitable for residential and light commercial double swing gates
🔧 Specifications
- Manufacturer: Centsys / Centurion Systems
- Kit Model: Vantage 400 Double Swing Gate Kit – 240V
- Kit SKU: A-VTG4D240KIT
- Operator Model: Vantage 400
- Operator SKU: A-VANTG401V4_AU
- Product Type: Double Swing Gate Automation Kit
- Gate Configuration: Double Leaf
- Number of Operators: 2
- Operator Type: Linear Piston Drive
- Motor Voltage: 12V DC
- Actuator Stroke: 400mm per Operator
- Control System: VX SMART
- Wallbox SKU: A-VECCAD02V6_AU
- Mains Input: 240V AC
- Charger: Integrated 1.8A Switch-Mode
- Mains Isolator: Included
- Wireless Receiver: Integrated Multichannel Receiver
- Remote Controls Included: 2 × Four-Button Transmitters
- Battery Voltage: 12V DC
- Battery Capacity: 7.2Ah
- Battery Type: Sealed Maintenance-Free
- Battery SKU: A-CP4C2
- Battery Quantity: 1
- Battery Backup: Supported
- Mounting Brackets: Included for Both Operators
- Mounting Hardware: Included for Both Operators
- Manual Release: Yes
- Safety Device Support: Subject to Controller Compatibility
- Application: Residential & Suitable Light Commercial Double Swing Gates
🔗 Compatibility
Double Swing Gate Requirements
The Vantage 400 Double Kit is designed for suitable double-leaf swing gates.
Installation suitability depends on:
- Individual gate leaf lengths
- Individual gate leaf weights
- Hinge positions
- Required opening angles
- Gate construction
- Wind loading
- Mounting geometry
- Gate movement resistance
Each operator has a 400mm actuator stroke.
Both gate leaves must be assessed against the manufacturer’s rated operating limits and mounting geometry requirements before installation.
Compatible Remote Controls
The included VX SMART multichannel receiver supports compatible Centsys transmitters.
Two four-button transmitters are included.
Additional transmitters must be compatible with the receiver supplied in the VX SMART wallbox.
Compatible Safety Accessories
The VX SMART controller supports compatible external safety equipment, subject to its input configuration.
Photoelectric safety beams and other protective devices must be selected according to the installation requirements.
⚠️ Please Note
This product is the genuine Centsys Vantage 400 Double Swing Gate Automation Kit with 240V mains supply, SKU A-VTG4D240KIT.
The kit includes two Vantage 400 linear operators, one VX SMART wallbox and one 12V 7.2Ah sealed maintenance-free battery.
The VX SMART wallbox includes the electronic controller, multichannel receiver, two four-button transmitters, 1.8A switch-mode charger and mains isolator.
Both Vantage 400 operators include their mounting brackets and associated mounting hardware.
This is a double swing gate kit designed to automate two gate leaves.
Each operator has a 400mm piston stroke. This is the actuator travel measurement and does not represent the maximum gate leaf length.
Maximum suitable gate dimensions and weights depend on the manufacturer’s specifications, gate construction, wind exposure and installation geometry.
Photoelectric safety beams and additional protective devices are not included.
Both gate leaves must be mechanically sound, correctly aligned and able to move freely before automation.
240V electrical connections must be completed by an appropriately licensed electrician.
Gate automation installation and commissioning must comply with Centsys instructions and applicable Australian safety requirements.
For assistance selecting compatible safety beams, remote controls or additional accessories, contact our Technical Support team on 1300 733 066.
