Description
The Centsys D10 SMART 1000kg Commercial Sliding Gate Automation Kit is a powerful, heavy-duty automatic sliding gate system designed for commercial, industrial and high-traffic residential applications.
Featuring a 24V DC motor system, advanced Centsys SMART technology and Bluetooth programming through the MyCentsys Pro smartphone application, the D10 SMART provides intelligent and reliable automation for sliding gates weighing up to 1000kg.
Designed for demanding installations, the D10 SMART combines powerful motor performance with adjustable operating speeds, intelligent obstacle detection, electronic travel limit management and programmable access control functions.
This automation kit includes the D10 SMART commercial sliding gate operator, two 12V 7.2Ah sealed maintenance-free batteries and four metres of steel-core reinforced nylon gate rack.
The operator is supplied with its standard mounting accessories, including the foundation plate, mounting hardware and manual release keys.
No separate battery charger is required for this kit configuration.
Remote controls are not included and must be purchased separately.
⚙️ Heavy-Duty 1000kg Sliding Gate Automation
The Centsys D10 SMART is designed to automate sliding gates weighing up to 1000kg.
Its powerful motor system makes it suitable for larger and heavier sliding gates where a residential operator may not provide sufficient capacity.
Typical applications include:
- Commercial sliding gates
- Industrial property entrances
- Warehouse access gates
- Factory entrances
- Apartment complexes
- Shared residential driveways
- Commercial parking areas
- Large residential sliding gates
The operator is designed for sliding gates operating on a suitable ground track with a correctly installed rack-and-pinion drive system.
⚡ Powerful 24V DC Motor System
The D10 SMART uses a 24V DC motor system designed to provide powerful and controlled gate movement.
The operator operates using two 12V batteries connected in series, providing a nominal 24V DC supply.
Benefits include:
- Heavy-duty 24V DC motor operation
- Suitable for gates up to 1000kg
- Smooth acceleration and deceleration
- Adjustable opening and closing speeds
- Controlled gate movement
- Electronic travel limit management
- Battery backup capability
Actual operating performance depends on gate weight, mechanical condition, installation and controller settings.
📱 Bluetooth Programming with MyCentsys Pro
The D10 SMART incorporates Bluetooth connectivity for programming, commissioning and diagnostics using the Centsys MyCentsys Pro smartphone application.
The application provides convenient access to supported controller settings and operating information.
Available functions include:
- Initial gate setup and commissioning
- Opening and closing speed adjustment
- Acceleration and deceleration settings
- Pedestrian opening configuration
- Automatic closing settings
- Safety input configuration
- Remote-control management
- Diagnostic information
- Gate operating parameters
- Controller status monitoring
Bluetooth programming simplifies installation and allows supported settings to be adjusted during future maintenance.
🧠 Intelligent SMART Control System
The D10 SMART features an integrated electronic control system designed to manage gate movement, safety functions and access control.
Its programmable controller provides flexible operating options for commercial and industrial sliding gate installations.
Features include:
- Intelligent motor control
- Electronic travel limit management
- Adjustable operating speeds
- Soft start and soft stop
- Programmable pedestrian opening
- Automatic closing capability
- Electronic obstacle detection
- Adjustable collision sensitivity
- Compatible safety device integration
- Bluetooth diagnostics and programming
The controller can be configured according to the gate’s mechanical characteristics and operating requirements.
🔋 Includes Two 12V 7.2Ah Batteries
This kit includes two 12V 7.2Ah sealed maintenance-free batteries.
The batteries are connected in series to provide the nominal 24V DC supply required by the D10 SMART operator.
Included battery components:
- 2 × 12V 7.2Ah Sealed Maintenance-Free Batteries
- Battery Part Number: A-CP4C2
- Nominal Battery System Voltage: 24V DC
- Battery Capacity: 7.2Ah
The batteries support normal DC motor operation and provide backup capability during mains power interruptions, subject to available battery charge and operating conditions.
No separate battery charger is required for this kit configuration.
Battery backup operating time depends on gate weight, operating frequency, battery condition and environmental conditions.
🛤️ Includes 4 Metres of Reinforced Nylon Gate Rack
The kit includes four individual 1-metre lengths of steel-core reinforced nylon gate rack.
Each rack length features six downward-facing mounting lugs.
Included rack specifications:
- Part Number: A-AU.90
- Quantity: 4 Lengths
- Individual Length: 1 Metre
- Total Supplied Length: 4 Metres
- Construction: Steel-Core Reinforced Nylon
- Mounting: 6 Downward-Facing Lugs per Length
- Rack Rating: Suitable for Gates up to 800kg
The reinforced nylon rack provides the drive connection between the sliding gate and operator pinion.
Although the D10 SMART operator is rated for gates up to 1000kg, the supplied A-AU.90 rack is specified for gates up to 800kg.
For installations exceeding the rack’s rated capacity, a suitable alternative rack must be selected.
Additional rack lengths may also be required depending on the gate length and travel.
📡 Wireless Remote-Control Compatibility
The D10 SMART supports compatible Centsys wireless access control transmitters.
Compatible remote controls can be programmed to operate supported gate functions, including full opening and pedestrian access.
Benefits include:
- Wireless gate operation
- Secure compatible transmitter technology
- Programmable remote-control functions
- Pedestrian access capability
- Support for multiple authorised users
Remote Controls Not Included
This kit does not include remote controls.
Compatible transmitters must be purchased separately.
🛡️ Intelligent Obstacle Detection
The D10 SMART incorporates electronic obstacle detection designed to monitor resistance during gate movement.
If abnormal resistance is detected, the controller can respond according to its programmed safety settings.
Features include:
- Electronic obstacle detection
- Adjustable collision sensitivity
- Programmable safety responses
- Controlled gate movement
- Support for compatible external safety devices
Obstacle detection is a supplementary safety function and does not replace correctly installed photoelectric safety beams or other protective devices.
👁️ Safety Beam Compatibility
The D10 SMART supports compatible safety devices designed to detect obstructions around the gate opening.
Compatible accessories may include the Centsys Photon SMART Wireless Safety Beam Kit, subject to the operator’s supported controller configuration.
The Photon SMART system uses battery-powered transmitter and receiver units with wireless communication to compatible Centsys SMART controllers.
Safety beams are not included in this automation kit.
The appropriate safety equipment must be selected according to the gate installation and applicable safety requirements.
🚶 Pedestrian Opening & Automatic Closing
The D10 SMART supports programmable pedestrian opening, allowing the gate to open partially for pedestrian access.
This is useful for:
- Pedestrian entry and exit
- Bicycle access
- Commercial personnel access
- Shared driveway applications
- Reducing unnecessary full gate movement
The operator also supports automatic closing, allowing the gate to close after a programmed delay where the installation and safety configuration permit.
These functions can be configured through the SMART control system.
🔓 Manual Release for Emergency Access
The D10 SMART features a manual release mechanism that allows the gate to be disengaged from the operator when required.
This enables manual gate movement during maintenance, equipment faults or situations where powered operation is unavailable.
Manual release keys are included with the operator package.
The gate must be correctly installed and able to move freely along its track for safe manual operation.
🏭 Commercial & Industrial Applications
The D10 SMART is suitable for a wide range of heavier-duty sliding gate installations.
Typical applications include:
- Commercial property entrances
- Industrial sliding gates
- Warehouse access gates
- Factory entrances
- Commercial parking facilities
- Apartment complexes
- Shared access driveways
- Large residential sliding gates
- Property management installations
Gate weight, travel length, operating frequency and mechanical condition must be assessed before selecting the appropriate operator.
📦 What’s Included?
The Centsys D10 SMART Commercial Sliding Gate Automation Kit (A-D10SM240KIT) contains:
| Qty | Part Number | Description |
|---|---|---|
| 1 | A-D10RSMARTB00_AU | Centsys D10 SMART 1000kg Commercial Sliding Gate Operator |
| 4 | A-AU.90 | 1m Steel-Core Reinforced Nylon Gate Rack with 6 Downward-Facing Lugs |
| 2 | A-CP4C2 | 12V 7.2Ah Sealed Maintenance-Free Battery |
The D10 SMART operator package also includes:
- Integrated SMART Control System
- Mounting Foundation Plate
- Operator Mounting Hardware
- Manual Release Keys
Not Included
- Remote Control Transmitters
- Photoelectric Safety Beams
- Additional Gate Rack Beyond the Supplied 4m
- 240V Electrical Supply Installation
- Additional Access Control Accessories
- Installation Labour
⭐ Key Features
- Genuine Centsys D10 SMART 1000kg Commercial Sliding Gate Automation Kit
- Manufacturer Kit SKU: A-D10SM240KIT
- Suitable for sliding gates up to 1000kg
- Heavy-duty commercial sliding gate operator
- 24V DC motor system
- Designed for 240V mains supply installations
- Includes 2 × 12V 7.2Ah sealed maintenance-free batteries
- Includes 4 × 1m steel-core reinforced nylon gate rack
- Bluetooth programming through MyCentsys Pro
- Integrated intelligent SMART control system
- Adjustable opening and closing speeds
- Smooth acceleration and deceleration
- Electronic travel limit management
- Intelligent obstacle detection
- Programmable pedestrian opening
- Automatic closing capability
- Battery backup capability
- Compatible with supported SMART safety accessories
- Includes mounting foundation plate and hardware
- Includes manual release keys
- No separate battery charger required
- Remote controls sold separately
- Suitable for commercial, industrial and heavy residential sliding gates
🔧 Specifications
- Manufacturer: Centsys / Centurion Systems
- Kit Model: D10 SMART 240V Kit
- Kit SKU: A-D10SM240KIT
- Operator Model: D10 SMART
- Operator SKU: A-D10RSMARTB00_AU
- Product Type: Commercial Sliding Gate Automation Kit
- Maximum Gate Weight: 1000kg
- Motor Type: DC
- Motor Operating Voltage: 24V DC
- Mains Supply Configuration: 240V AC
- Battery Configuration: 2 × 12V Batteries in Series
- Nominal Battery System Voltage: 24V DC
- Battery Capacity: 7.2Ah
- Battery Type: Sealed Maintenance-Free
- Battery SKU: A-CP4C2
- Batteries Included: Yes
- Separate Charger Required: No
- Rack Type: Steel-Core Reinforced Nylon
- Rack SKU: A-AU.90
- Rack Quantity: 4 × 1m Lengths
- Total Rack Supplied: 4m
- Rack Rating: 800kg
- Rack Mounting: 6 Downward-Facing Lugs per Length
- Control System: Integrated SMART Controller
- Programming: Bluetooth / MyCentsys Pro
- Remote Controls Included: No
- Pedestrian Opening: Supported
- Automatic Closing: Supported
- Obstacle Detection: Electronic
- Speed Adjustment: Programmable
- Travel Limit Control: Electronic
- Safety Beam Support: Subject to Compatibility
- Manual Release: Yes
- Mounting Accessories Included: Yes
- Application: Commercial, Industrial & Heavy Residential Sliding Gates
🔗 Compatibility
Sliding Gate Requirements
The D10 SMART operator is designed for suitable sliding gates weighing up to 1000kg.
The installation requires:
- Suitable sliding gate track and wheels
- Correctly installed mechanical end stops
- Properly aligned gate rack
- Suitable operator foundation
- Appropriate mains electrical supply
- Correctly installed safety equipment
Four metres of A-AU.90 reinforced nylon rack are supplied.
The included rack has a specified 800kg rating. Gates exceeding this rack rating require an appropriately rated alternative.
Additional rack may be required depending on the gate length and travel.
Compatible Remote Controls
The D10 SMART supports compatible Centsys wireless transmitters, subject to the receiver configuration.
Remote controls are not included and must be ordered separately.
Compatible Safety Accessories
The D10 SMART supports compatible Centsys SMART safety accessories, including the Photon SMART Wireless Safety Beam Kit, subject to controller compatibility.
Additional compatible access control and safety devices may be connected according to the manufacturer’s requirements.
⚠️ Please Note
This product is the genuine Centsys D10 SMART 1000kg Commercial Sliding Gate Automation Kit, SKU A-D10SM240KIT.
The kit includes the D10 SMART operator, two 12V 7.2Ah sealed maintenance-free batteries and four metres of steel-core reinforced nylon gate rack.
The operator package also includes mounting accessories and manual release keys.
Remote controls are not included and must be purchased separately.
No separate battery charger is required for this kit configuration.
The D10 SMART operator is rated for sliding gates up to 1000kg.
The included A-AU.90 nylon rack is rated for gates up to 800kg. An appropriately rated alternative rack is required where the gate exceeds this rating.
The supplied four metres of rack may not be sufficient for every gate installation.
Photoelectric safety beams and additional protective devices may be required depending on the installation.
The gate must be mechanically sound, correctly aligned and able to move freely before automation.
240V electrical connections must be completed by an appropriately licensed electrician.
Gate automation installation and commissioning must comply with Centsys instructions and applicable Australian safety requirements.
For assistance selecting compatible remote controls, additional rack, safety beams or other accessories, contact our Technical Support team on 1300 733 066.
