Description
ATA TrioCode128 PTX-2V2 – Genuine Remote
The ATA PTX-2V2 is a genuine 2-button water-resistant remote control designed for compatible Automatic Technology Australia garage door, gate and industrial automation systems using TrioCode or TrioCode128 radio technology.
Compact, durable and designed for everyday use, the PTX-2V2 combines secure rolling-code technology with multi-frequency transmission to provide reliable operation in environments where radio interference can affect conventional remote controls.
With two programmable buttons, the PTX-2V2 can control up to two compatible doors, gates or functions from a single compact keyring remote.
🇦🇺 Genuine ATA Remote
The PTX-2V2 is a genuine Automatic Technology Australia remote control.
It is designed specifically for compatible ATA TrioCode and TrioCode128 automation systems, making it an excellent choice when replacing a lost, damaged or worn original remote.
ATA Part Number: 61169
💧 Water-Resistant Design
The PTX-2V2 is ATA’s compact water-resistant 2-button transmitter.
Its durable enclosure makes it particularly well suited to everyday use where the remote may be carried:
- On a keyring
- In a pocket
- In a handbag
- In a work vehicle
- Around outdoor gate installations
The water-resistant construction provides additional protection against everyday moisture and exposure compared with a conventional indoor-style transmitter.
🔐 TrioCode128 Technology
The PTX-2V2 uses ATA’s TrioCode128 secure remote-control technology.
TrioCode128 provides rolling-code security, meaning the transmitted security code changes during operation rather than repeatedly sending the same fixed code.
This provides a high level of protection against unauthorised copying of the transmitted remote-control signal.
📡 Multi-Frequency Transmission
ATA’s TrioCode technology was developed to improve remote-control reliability in environments affected by increasing levels of radio interference.
Rather than relying on only a single transmission frequency, TrioCode uses multiple frequencies.
This helps maintain reliable communication where interference from other wireless equipment may otherwise affect remote operation.
🎛️ Two Programmable Buttons
The PTX-2V2 features two programmable buttons.
Each button can be programmed independently to a compatible opener, receiver or supported function.
For example:
- Button 1 – Garage Door
- Button 2 – Automatic Gate
Alternatively, the buttons can be programmed to two separate garage doors or other compatible ATA automation systems.
🚪 Control Multiple Openers
Because the two buttons can be programmed independently, one PTX-2V2 can replace the need to carry separate remotes for compatible systems.
Typical configurations include:
- Garage Door + Gate
- Garage Door 1 + Garage Door 2
- Gate 1 + Gate 2
- Garage Door + Compatible Access Function
This makes the PTX-2V2 particularly convenient for properties using multiple ATA automation products.
🔄 Backwards Compatible with TrioCode
An important advantage of the PTX-2V2 is backwards compatibility with compatible earlier ATA TrioCode systems.
This means the newer TrioCode128 PTX-2V2 can be programmed into many ATA openers originally supplied with the previous TrioCode generation of transmitters.
This makes it an excellent genuine replacement option for a wide range of older ATA garage door and gate openers.
🏠 Garage Door Opener Compatibility
The PTX-2V2 is compatible with a wide range of ATA garage door openers using compatible TrioCode or TrioCode128 receivers.
Compatible opener families include selected models from:
- EasyRoller
- SecuraLift
- ShedMaster
- Enduro
- Dynamo
- Ero
- Toro
- Hiro
- Tempo
- Synchro
This covers both roller door and sectional garage door opener systems.
🚧 Gate Opener Compatibility
The PTX-2V2 is also compatible with a wide range of ATA gate automation equipment.
Compatible systems include selected models from:
- NeoSlider
- Elite Swing Gate Opener
- DCB-05 Gate Controller
- DCB-05V2 Gate Controller
- Compatible ATA TrioCode receivers
This allows the same PTX-2V2 remote to operate both an ATA garage door and ATA automatic gate where compatible receivers are installed.
🏭 Industrial Opener Compatibility
The PTX-2V2 can also be used with compatible ATA industrial automation systems equipped with TrioCode or TrioCode128 receiver technology.
This includes selected Axess Pro systems and compatible ATA industrial receivers.
This makes the PTX-2V2 useful across residential, commercial and industrial ATA automation installations.
🧰 Easy Programming
The PTX-2V2 can be programmed directly into the memory of a compatible ATA garage door opener, gate controller or receiver.
A typical ATA programming procedure involves:
- Locate the DOOR CODE button on the compatible opener
- Press and hold the DOOR CODE button
- Press the desired button on the PTX-2V2
- Release and wait approximately two seconds
- Press the same remote button again
- Release the DOOR CODE button
Programming procedures can vary between opener and receiver models, so the instructions for the particular automation system should always be followed.
🔋 Replaceable CR2032 Battery
The PTX-2V2 is powered by a replaceable CR2032 lithium coin-cell battery.
The battery can be replaced when required without replacing the complete remote.
A battery is supplied with the genuine PTX-2V2 remote.
📐 Compact Keyring Design
The PTX-2V2 has an extremely compact design that makes it easy to carry with your everyday keys.
Approximate dimensions:
- Height: 45mm
- Width: 37mm
- Depth: 11mm
- Weight: Approximately 13g
Its small size makes it an excellent alternative for customers who prefer a simple two-button remote rather than a larger multi-button transmitter.
🔄 Ideal Replacement Remote
The genuine PTX-2V2 is ideal when:
- An existing remote has been lost
- An existing remote has been damaged
- The remote casing is worn
- An additional remote is required
- You need to operate a garage door and gate from one remote
- You want a compact water-resistant transmitter
- You need a genuine replacement for a compatible TrioCode remote
Key Features
- Genuine Automatic Technology Australia remote
- Model: PTX-2V2
- ATA Part Number: 61169
- TrioCode128 technology
- Backwards compatible with compatible TrioCode systems
- 2 programmable buttons
- Control up to two compatible doors, gates or functions
- Multi-frequency transmission
- Secure rolling-code technology
- Water-resistant design
- Compact keyring remote
- Suitable for garage door openers
- Suitable for gate automation
- Suitable for compatible industrial openers
- Compatible with selected ATA TrioCode receivers
- Replaceable CR2032 lithium battery
- Battery included
- Easy programming
- Ideal genuine replacement remote
Specifications
- Manufacturer: Automatic Technology Australia
- Brand: ATA
- Model: PTX-2V2
- Part Number: 61169
- Product Type: Genuine Remote Transmitter
- Radio Technology: TrioCode128
- Backwards Compatibility: Compatible ATA TrioCode Systems
- Number of Buttons: 2
- Number of Channels: 2
- Transmission: Multi-Frequency
- Coding: Rolling Code
- Water Resistant: Yes
- Battery: CR2032 Lithium Coin Cell
- Battery Replaceable: Yes
- Battery Included: Yes
- Approximate Dimensions: 45 × 37 × 11mm
- Approximate Weight: 13g
- Application: Garage Doors, Gates & Compatible Industrial Automation
Compatibility
The ATA PTX-2V2 is compatible with a wide range of TrioCode and TrioCode128 automation systems.
Compatible ATA Roller Door Openers include selected:
- GDO-6V3 EasyRoller
- GDO-6V4 EasyRoller
- GDO-8V3 ShedMaster
- GDO-10V2 Toro
- GDO-10V3 Toro
- GDO-12 Hiro
Compatible ATA Sectional Door Openers include selected:
- GDO-7V2 SecuraLift
- GDO-7V3 SecuraLift
- GDO-9V2 Enduro
- GDO-9V3 Dynamo
- GDO-11V1 Ero
- GDO-11V3 Ero
- ATS-2 Tempo
- ATS-3 Synchro
Compatible ATA Gate Automation includes selected:
- SGO-1 Elite Swing Gate Opener
- NES-24 NeoSlider
- NES-24V2 NeoSlider
- NES-24V3 NeoSlider
- NES-500 NeoSlider
- NES-800 NeoSlider
- DCB-05 Gate Controller
- DCB-05V2 Gate Controller
Compatible ATA Industrial Systems include selected:
- Axess Pro 1505
- Axess Pro industrial systems fitted with compatible TrioCode receivers
- Compatible standalone TrioCode receivers
- Compatible plug-in TrioCode receivers
⚠️ Please Note
The PTX-2V2 is a genuine ATA TrioCode128 remote control.
It is backwards compatible with many ATA openers using the earlier TrioCode radio system.
It is not compatible with older ATA SecuraCode systems using PTX-4 remotes, nor is it directly compatible with older 27MHz ATA remote-control systems unless a compatible TrioCode receiver has been added to the opener.
Because ATA has produced multiple generations of remote-control technology, always confirm the opener model, existing remote or receiver technology before ordering.
The PTX-2V2 contains a CR2032 lithium coin-cell battery. Button and coin batteries can cause serious injury if swallowed. Keep new and used batteries out of reach of children and dispose of used batteries safely.
If you are unsure whether the PTX-2V2 is compatible with your ATA garage door or gate opener, use our compatibility checker or contact our Technical Support team on 1300 733 066 before ordering.
