Description
The ATA KPX-7V4 TrioCode128 Wireless Keypad is the latest-generation wireless access keypad from Automatic Technology Australia, providing secure and convenient PIN-controlled access to compatible garage door and gate automation systems.
Replacing the previous KPX-7V2 Wireless Keypad, the new KPX-7V4 features updated internal technology and a simplified PIN management system, making installation, programming and everyday operation easier.
The major improvement is the introduction of a unique factory-programmed 4-digit PIN for every keypad, eliminating the need to create a master PIN during initial setup.
Once programmed to a compatible opener, the keypad can be operated using its factory PIN or a personalised PIN selected by the user.
ATA Part Number: 102710
Replaces: ATA KPX-7V2 – Part Number 62280
🆕 Latest KPX-7V4 Generation
The KPX-7V4 is the updated replacement for the previous ATA KPX-7V2 Wireless Keypad.
Automatic Technology has introduced an internal technology refresh designed to simplify PIN management while retaining compatibility with the same garage door and gate openers supported by the previous model.
Key improvements include:
- New internal electronics
- Unique factory-programmed 4-digit PIN
- No initial master PIN creation required
- Simplified first-time setup
- Improved PIN management
- Updated PIN programming procedure
- Unchanged opener compatibility compared with KPX-7V2
The KPX-7V4 is the current replacement model for the discontinued KPX-7V2.
🔢 Unique Factory-Programmed 4-Digit PIN
Every ATA KPX-7V4 Wireless Keypad is supplied with its own unique 4-digit factory PIN.
Unlike the previous KPX-7V2, customers no longer need to create a master PIN when initially setting up the keypad.
Once the keypad has been programmed to the compatible garage door or gate operator, the factory PIN can be used immediately for access.
Customers can then choose to:
- Continue using the supplied factory PIN
- Change the PIN to a personalised 4-digit code
This simplifies initial installation and reduces the number of programming steps required.
🔐 Where to Find the Factory PIN
The unique factory PIN is supplied in two locations.
1. Quick Setup Guide
A sticker containing the factory PIN is located at the top of the Quick Setup Guide included with the keypad.
2. Under the Weather Cover
The factory PIN is also located underneath the keypad’s weather cover.
Customers should keep a secure record of their factory PIN.
IMPORTANT: The original factory PIN is required if the keypad ever needs to be reset.
🚪 Convenient Keyless Garage Door Access
The KPX-7V4 allows authorised users to operate a compatible garage door or gate using a PIN instead of a handheld remote control.
This provides convenient access for:
- Family members
- Children returning home
- People walking or exercising
- Gardeners and property owners
- Garage access without carrying keys
- Workshops and storage areas
- Other authorised users
The keypad provides a practical alternative to carrying a garage door remote.
📡 TrioCode128 Wireless Technology
The KPX-7V4 uses Automatic Technology’s TrioCode128 wireless remote control system.
TrioCode128 is designed to provide secure radio communication between compatible ATA transmitters and automation equipment.
The keypad must be programmed to a compatible TrioCode128 receiver before operation.
It is not a universal wireless keypad and will not automatically work with all garage door or gate operators.
🛡️ Secure PIN-Controlled Operation
The keypad requires the correct programmed PIN before sending an activation command to the connected opener.
This helps prevent unauthorised operation while allowing convenient access for approved users.
The PIN can be changed according to the latest KPX-7V4 programming instructions.
For security, customers should avoid sharing their access PIN unnecessarily and should store their original factory PIN securely.
🌦️ External Wireless Keypad
The KPX-7V4 is designed for external access applications.
Its protective weather cover helps shield the keypad when installed in a suitable location outside the garage or gate entrance.
Typical mounting locations include:
- External garage walls
- Garage door jambs
- Protected entry areas
- Gate access points
- Suitable external mounting surfaces
The keypad should be mounted according to the manufacturer’s installation instructions.
🔋 Battery-Powered Wireless Installation
The keypad communicates wirelessly with the compatible garage door or gate operator.
This eliminates the need to run a control cable between the keypad and the opener.
Wireless installation makes the KPX-7V4 suitable for:
- New installations
- Existing garage door systems
- Replacement keypad installations
- Retrofitting keyless access
- Properties where running additional control wiring is impractical
🔄 Direct Replacement for KPX-7V2
The KPX-7V4 supersedes the previous KPX-7V2 Wireless Keypad.
Automatic Technology has confirmed that opener compatibility remains unchanged between the two generations.
This means the new KPX-7V4 can replace a compatible KPX-7V2 installation without requiring a different opener or receiver solely because of the keypad generation change.
However, the PIN setup and programming procedures have changed.
Customers replacing a KPX-7V2 should follow the new KPX-7V4 Quick Setup Guide rather than the instructions for the older keypad.
🛠️ Simplified Initial Programming
The KPX-7V4 has been designed to simplify initial keypad setup.
The general setup process involves:
- Locate the unique factory PIN supplied with the keypad.
- Program the keypad to the compatible garage door or gate operator using the KPX-7V4 Quick Setup Guide.
- Test operation using the factory PIN.
- If desired, change the PIN to a personalised code.
- Retain the original factory PIN in a secure location for future reset procedures.
The exact programming sequence must be followed from the current KPX-7V4 instructions.
Programming procedures from the previous KPX-7V2 should not be used.
🏠 Residential & Commercial Applications
The KPX-7V4 can provide convenient access control for compatible garage door and gate automation systems.
Typical applications include:
- Residential garage doors
- Sectional garage doors
- Roller garage doors
- Tilt garage doors
- Residential driveway gates
- Workshops
- Storage facilities
- Commercial premises with compatible operators
Compatibility depends on the receiver and radio system fitted to the operator.
⭐ Key Features
- Genuine Automatic Technology wireless keypad
- Latest KPX-7V4 generation
- ATA Part Number 102710
- Replaces KPX-7V2 Part Number 62280
- TrioCode128 wireless technology
- Unique factory-programmed 4-digit PIN
- No initial master PIN creation required
- User-changeable access PIN
- Simplified PIN management
- Updated internal technology
- Wireless operation
- No control wiring required
- Protective weather cover
- Factory PIN located in two places
- Factory PIN retained for reset procedures
- Same opener compatibility as previous KPX-7V2
- Suitable for compatible garage door operators
- Suitable for compatible gate automation systems
- Ideal for replacement and new installations
- Convenient keyless access
🔧 Specifications
- Manufacturer: Automatic Technology Australia
- Brand: ATA
- Product: KPX-7V4 Wireless Keypad
- Part Number: 102710
- Previous Model: KPX-7V2
- Previous Part Number: 62280
- Product Type: Wireless Access Keypad
- Radio Technology: TrioCode128
- Access Method: PIN Code
- Factory PIN: Unique 4-Digit Code
- Factory PIN Location: Quick Setup Guide Sticker and Under Weather Cover
- Personalised PIN: User Changeable
- Initial Master PIN Setup: Not Required
- Installation: Wireless
- Application: Garage Door & Gate Automation
- Opener Compatibility: Same as KPX-7V2
- Quantity: 1 Keypad
🔗 Compatibility
The ATA KPX-7V4 Wireless Keypad is compatible with the same garage door and gate openers as the previous KPX-7V2 model.
It is designed for compatible Automatic Technology TrioCode128 receiver systems.
Compatible Systems
- Compatible ATA TrioCode128 Garage Door Operators
- Compatible ATA TrioCode128 Gate Operators
- Compatible ATA TrioCode128 External Receivers
- Other operator systems specifically approved for KPX-7V2/KPX-7V4 operation
Replacement Compatibility
- Replaces ATA KPX-7V2 Wireless Keypad
- Previous ATA Part Number 62280
- New ATA Part Number 102710
The radio receiver installed in the opener must support the appropriate TrioCode128 keypad system.
⚠️ Please Note
This product is the ATA KPX-7V4 TrioCode128 Wireless Keypad.
ATA Part Number: 102710
This is the updated replacement for the ATA KPX-7V2 Wireless Keypad, Part Number 62280.
IMPORTANT: Every KPX-7V4 is supplied with its own unique 4-digit factory PIN.
The factory PIN is located:
- On a sticker at the top of the Quick Setup Guide
- Underneath the keypad’s weather cover
Customers should retain the original factory PIN in a secure location, as it is required if the keypad needs to be reset.
The KPX-7V4 no longer requires customers to create a master PIN during initial setup.
The keypad can continue using the factory PIN or be changed to a personalised PIN.
IMPORTANT: The PIN programming and reset procedures have changed from the previous KPX-7V2 model.
Always use the new KPX-7V4 Quick Setup Guide when programming or resetting the keypad.
Opener compatibility remains the same as the previous KPX-7V2 model.
The keypad must be programmed to a compatible TrioCode128 receiver before operation.
The keypad does not replace the safety functions of the garage door or gate operator. All required safety devices must remain correctly installed and operational.
If you are unsure whether the KPX-7V4 is compatible with your existing opener, contact our Technical Support team on 1300 733 066 for assistance.
