Description
The e-LOOP Post Mount V4.0 Wireless Radar Vehicle Detection Kit is an advanced, battery-powered vehicle detection system designed for automatic gates, boom barriers and vehicle access control applications.
Combining magnetic field detection with radar confirmation, the e-LOOP Post Mount detects vehicles passing through its detection area and wirelessly communicates with the included e-Trans 50 transceiver.
Unlike conventional induction loops that require cutting into concrete or asphalt, the e-LOOP Post Mount is installed beside the driveway on a suitable post, column or structure.
This makes it an excellent solution for existing automatic gates, residential driveways, commercial entrances and locations where installing a traditional underground loop would be difficult or expensive.
The complete kit includes the e-LOOP Post Mount V4.0 radar sensor, e-Trans 50 wireless transceiver and batteries.
🚗 Wireless Vehicle Detection Without Driveway Cutting
Traditional vehicle detection loops require cables to be installed beneath the driveway surface, often involving saw-cutting, trenching and reinstatement work.
The e-LOOP Post Mount eliminates these requirements by positioning the sensor beside the vehicle path.
Benefits include:
- No traditional induction loop required
- No driveway cutting or trenching
- No buried vehicle detection wiring
- Post-mounted sensor installation
- Wireless communication with the receiver
- Ideal for existing concrete and asphalt driveways
- Reduced installation disruption
- Suitable for new and existing automatic gate systems
📡 Dual Magnetic & Radar Detection Technology
The e-LOOP Post Mount combines magnetic field sensing with radar confirmation to detect vehicles.
Magnetic Field Detection
The integrated magnetometer detects changes in the surrounding magnetic field caused by a vehicle entering the detection area.
Radar Confirmation
The radar sensor provides additional detection capability to help confirm vehicle presence.
Together, these technologies allow the system to monitor suitable vehicles passing through the configured detection zone.
Features include:
- Magnetic vehicle detection
- Radar-assisted confirmation
- Wireless activation signals
- Vehicle presence monitoring
- Adjustable detection positioning
- Suitable for automatic gate and barrier applications
🔄 Vehicle Presence Detection
The e-LOOP Post Mount is designed for vehicle presence detection applications.
When a vehicle enters the configured detection area, the sensor communicates with the paired transceiver.
The receiver can then provide an output to a compatible gate or barrier controller.
Typical applications include:
- Automatic gate activation
- Vehicle presence monitoring
- Commercial driveway access
- Boom barrier control
- Residential driveway exits
- Industrial vehicle access
The gate controller must have an appropriate dedicated opening input and automatic closing function configured for the intended operation.
Presence detection is intended for vehicles and must not be used as the sole safety protection for an automatic gate.
📶 e-Trans 50 Wireless Transceiver Included
The kit includes an e-Trans 50 wireless transceiver.
The transceiver receives detection signals from the e-LOOP Post Mount and provides a relay output for integration with a compatible automatic gate or barrier controller.
Features include:
- Wireless communication with the e-LOOP sensor
- Relay output for gate controller integration
- Secure encrypted communication
- Compact receiver design
- Suitable for compatible automatic gate systems
- No signal cable required between the sensor and receiver
The e-Trans 50 requires a suitable power supply and wired connection to the gate controller.
🔐 Secure Wireless Communication
The e-LOOP Post Mount system uses encrypted radio communication to transmit vehicle detection signals.
Published specifications for the Post Mount platform include:
- 433.39MHz wireless operating frequency
- 128-bit AES encryption
- Wireless communication range up to 50 metres under suitable conditions
- Secure communication with a compatible e-Trans receiver
Actual wireless performance depends on the installation environment, surrounding structures and radio interference.
🔋 Long-Life Battery Operation
The e-LOOP Post Mount is battery-powered, eliminating the need to run electrical wiring to the sensor mounting location.
Published Post Mount specifications include:
- 2 × AA lithium batteries
- Battery life up to approximately 3 years under suitable operating conditions
- Replaceable battery design
- Low-maintenance operation
Batteries are included in this kit.
Actual battery life depends on vehicle activity, operating conditions and battery quality.
🛠️ Convenient Post-Mounted Installation
One of the major advantages of the e-LOOP Post Mount is its installation flexibility.
Instead of being mounted directly onto the driveway surface, the sensor can be installed on a suitable post or supporting structure beside the vehicle path.
The manufacturer’s Post Mount installation guidance specifies a nominal mounting height of approximately 600mm above ground level.
The detection range is up to approximately 3 metres under suitable conditions.
Benefits include:
- No drilling into the driveway surface
- No underground wiring
- Convenient access for servicing
- Suitable for existing gate posts
- Reduced disruption during installation
- Practical for retrofit applications
Sensor positioning, orientation and calibration must follow the manufacturer’s installation instructions.
🌧️ Weather-Resistant Construction
The e-LOOP Post Mount is designed for outdoor vehicle access applications.
Published features include:
- IP68-rated sensor enclosure
- Weather-resistant construction
- Compact housing
- Battery-powered operation
- Suitable for outdoor mounting
- Low-maintenance design
The sensor is designed to operate in demanding outdoor environments when installed correctly.
🏠 Residential, Commercial & Industrial Applications
The e-LOOP Post Mount is suitable for a wide variety of vehicle detection applications.
Typical installations include:
- Residential Sliding Gates
- Residential Swing Gates
- Commercial Automatic Gates
- Boom Barriers
- Private Driveways
- Commercial Car Parks
- Industrial Entrances
- Factory Access Roads
- Warehouse Entrances
- Shared Vehicle Access Points
The post-mounted design is particularly beneficial where the driveway surface cannot be modified or where a conventional buried loop is impractical.
📦 Complete Wireless Vehicle Detection Kit
What’s Included?
| Qty | Component |
|---|---|
| 1 | e-LOOP Post Mount V4.0 Wireless Radar Vehicle Detection Sensor |
| 1 | e-Trans 50 Wireless Transceiver |
| 1 Set | Batteries for the e-LOOP Post Mount |
Not Included Unless Separately Supplied
- Automatic Gate Operator
- Gate Controller
- Additional Vehicle Detection Sensors
- Photoelectric Safety Beams
- Mounting Post or Structural Supports
- Installation Labour
- Site-Specific Receiver Wiring
⭐ Key Features
- e-LOOP Post Mount V4.0 wireless vehicle detection system
- Magnetic field detection with radar confirmation
- Post-mounted installation
- No traditional induction loop required
- No driveway cutting or trenching
- No buried detection cable
- Wireless communication between sensor and receiver
- Includes e-Trans 50 wireless transceiver
- Batteries included
- Vehicle presence detection capability
- Secure 128-bit AES encryption
- Up to 50m wireless communication range under suitable conditions
- Up to 3m vehicle detection range under suitable conditions
- Battery-powered sensor
- IP68-rated enclosure
- Suitable for outdoor installations
- Ideal for residential and commercial automatic gates
- Compatible with suitable boom barrier controllers
🔧 Specifications
- Manufacturer: AES Global
- Product: e-LOOP Post Mount
- Product Version: V4.0
- Product Type: Wireless Radar Vehicle Detection Kit
- Detection Technology: Magnetometer and Radar
- Detection Function: Vehicle Presence
- Installation Type: Post Mounted
- Recommended Mounting Height: Approximately 600mm
- Detection Range: Up to 3m
- Wireless Frequency: 433.39MHz
- Wireless Range: Up to 50m
- Wireless Security: 128-bit AES Encryption
- Sensor Battery Type: AA Lithium
- Sensor Battery Quantity: 2
- Published Battery Life: Up to 3 Years
- Sensor Protection Rating: IP68
- Approximate Sensor Dimensions: 176 × 70 × 30mm
- Included Receiver: e-Trans 50
- Receiver Output: Relay
- Typical Applications: Automatic Gates, Boom Barriers and Vehicle Access Control
Specifications are based on the manufacturer’s published Post Mount platform information. Exact specifications should be checked against the supplied V4.0 model.
🔗 Gate Automation Compatibility
The e-LOOP Post Mount can be integrated with suitable automatic gate and boom barrier controllers that support an appropriate external relay input.
Potential applications include:
- Automatic gate opening
- Vehicle-triggered access
- Vehicle presence monitoring
- Automatic exit systems
- Boom barrier activation
The controller must be correctly configured for the intended detection function.
Compatibility depends on the gate controller, available inputs and operating configuration.
⚠️ Please Note
This product is the e-LOOP Post Mount V4.0 Wireless Radar Vehicle Detection Kit supplied with an e-Trans 50 transceiver and batteries.
The sensor is intended for vehicle detection and must not be relied upon to detect pedestrians or other road users.
Vehicle presence detection must not be used as the sole safety device for an automatic gate or barrier.
Additional safety devices, including photoelectric safety beams, may be required depending on the installation.
The e-LOOP sensor communicates wirelessly with the receiver; however, the e-Trans 50 still requires a suitable power supply and connection to the gate controller.
Actual detection range, wireless range and battery life depend on site conditions and operating settings.
The system must be installed and configured in accordance with the manufacturer’s instructions.
For assistance with compatibility, installation requirements or additional gate automation accessories, contact Delta Warringah Garage Doors on 1300 733 066.


