NEW

E-Loop Commercial V4.0 – Wireless Radar Loop Kit

The e-LOOP Commercial V4.0 Wireless Radar Vehicle Detection Kit provides reliable vehicle detection for automatic gates and boom barriers without the need for traditional in-ground induction loops.

Combining magnetic and radar detection technology with wireless communication, the system offers a convenient solution for commercial and industrial access control applications.

📦 Kit Includes:

  • 1 × e-LOOP Commercial V4.0 Radar Loop
  • 1 × e-Trans 50 Wireless Transceiver
  • 1 × Set of Batteries

A complete wireless vehicle detection solution designed for easy installation without driveway cutting or buried loop wiring.

$884.00

SKU: EL00C - V4.0-K Categories: , Tag: Brand:

Description

The e-LOOP Commercial V4.0 Wireless Radar Vehicle Detection Kit is an advanced, industrial-grade vehicle detection system designed for automatic gates, boom barriers and commercial access control applications.

Combining magnetic field detection with radar technology, the e-LOOP Commercial V4.0 provides reliable wireless vehicle detection without the need to cut traditional induction loops into concrete or asphalt driveways.

Designed for demanding commercial and industrial environments, the e-LOOP offers a durable, surface-mounted alternative to conventional wired vehicle loop detectors.

The system features three selectable operating modes — Exit, Presence and Parking — allowing it to be configured for different vehicle detection requirements.

This complete kit includes the e-LOOP Commercial V4.0 radar detection module, e-Trans 50 wireless transceiver and the required batteries.

With encrypted wireless communication, a rugged weather-resistant enclosure and long battery life, the e-LOOP Commercial V4.0 is an ideal solution for commercial gate automation and vehicle access control.

🚗 Wireless Vehicle Detection Without Cutting Driveways


Traditional induction loop detectors require cables to be installed beneath the driveway surface, typically involving concrete cutting, asphalt cutting or trenching.

The e-LOOP Commercial eliminates the need for these buried detection loops.

The surface-mounted detection module identifies vehicles using its integrated sensing technology and wirelessly communicates with the e-Trans 50 receiver.

Benefits include:

  • No conventional induction loop required
  • No driveway saw-cutting for loop wiring
  • No buried detection cable
  • Wireless communication between sensor and receiver
  • Fast installation
  • Reduced installation disruption
  • Suitable for existing driveways
  • Ideal for commercial and industrial entrances

📡 Dual Radar & Magnetic Vehicle Detection


The e-LOOP Commercial V4.0 combines two vehicle sensing technologies.

Magnetic Field Detection

The integrated magnetometer detects changes in the surrounding magnetic field caused by vehicles.

This allows the sensor to identify suitable vehicles approaching or passing through the detection area.

Radar Detection

The integrated radar provides additional vehicle detection capability, particularly for monitoring vehicle presence.

The combination of magnetic and radar technology allows the system to support multiple operating modes for different access control requirements.

Features include:

  • Integrated magnetometer
  • Integrated radar sensor
  • Vehicle detection capability
  • Adjustable detection parameters
  • Wireless signal transmission
  • Suitable for automatic gate and barrier control

🔄 Three Selectable Operating Modes


The Commercial V4.0 supports three operating modes.

Exit Mode

Exit Mode generates a trigger when a vehicle is detected.

This is commonly used to automatically open a gate or barrier when a vehicle approaches from the exit side.

Typical applications include:

  • Automatic driveway exit
  • Commercial property exits
  • Warehouse vehicle exits
  • Industrial site access
  • Car park exit barriers

Presence Mode

Presence Mode maintains an active detection output while a vehicle remains within the configured detection area.

This can be used by a compatible controller to manage gate or barrier operation while a vehicle is detected.

Typical applications include:

  • Vehicle presence monitoring
  • Commercial gate control
  • Boom barrier systems
  • Vehicle access lanes

Presence detection must not be used as the sole safety protection for a moving gate or barrier.

Parking Mode

Parking Mode provides an alternative presence-style operating function with different response and power consumption characteristics.

This mode is suitable for applications where a slower detection response is acceptable.

📶 e-Trans 50 Wireless Transceiver Included


The kit includes the e-Trans 50 wireless transceiver.

The transceiver receives signals from the e-LOOP detection module and provides a relay output for connection to compatible gate and barrier controllers.

Features include:

  • Wireless communication with the e-LOOP
  • Compact receiver design
  • Relay output for access control integration
  • Support for compatible gate controllers
  • Multiple relay operating modes
  • Encrypted wireless communication
  • Suitable for commercial automation applications

The e-Trans 50 provides the interface between the wireless detection module and the gate automation system.

🔐 Secure Encrypted Wireless Communication


The e-LOOP Commercial V4.0 uses encrypted wireless communication to transmit detection information to the receiver.

Wireless system features include:

  • 433.39MHz operating frequency
  • 128-bit AES encryption
  • Wireless communication range up to 50 metres under suitable conditions
  • No physical signal cable required between the e-LOOP and receiver

Actual communication range depends on installation conditions, obstructions and radio interference.

🔋 Long-Life Battery Operation


The e-LOOP Commercial V4.0 is battery-powered, eliminating the need to run electrical cables to the driveway-mounted detection module.

The commercial sensor uses four 3.6V lithium batteries.

Battery life can reach approximately 10 years in Exit Mode under suitable operating conditions.

Presence Mode generally consumes more power, with a published battery life of up to approximately four years.

Actual battery life depends on operating mode, detection frequency, environmental conditions and battery condition.

Batteries are included with this kit.

🛠️ Surface-Mounted Installation


The e-LOOP Commercial is designed for installation directly onto a suitable driveway surface.

Unlike traditional induction loops, the sensor does not require buried wiring.

Typical installation involves:

  1. Pairing the e-LOOP with the e-Trans 50 receiver.
  2. Positioning the sensor in the appropriate vehicle detection area.
  3. Securing the sensor to the driveway.
  4. Calibrating the detection system.
  5. Configuring the required operating mode.
  6. Connecting the receiver to the compatible gate or barrier controller.

The sensor should be installed according to the manufacturer’s instructions, taking account of vehicle paths, surface conditions and nearby sources of interference.

🏭 Commercial & Industrial Construction


The e-LOOP Commercial V4.0 is designed for demanding vehicle access environments.

Features include:

  • Heavy-duty commercial enclosure
  • IP68-rated sensor housing
  • Surface-mounted construction
  • Suitable for vehicle traffic areas
  • Designed for outdoor installation
  • Industrial vehicle detection capability
  • Minimal ongoing maintenance

The commercial version is designed for substantial static loading, making it suitable for appropriately installed commercial driveway applications.

🚧 Automatic Gate & Boom Barrier Applications


The e-LOOP Commercial V4.0 is suitable for a wide range of vehicle access control installations.

Typical applications include:

  • Automatic sliding gates
  • Automatic swing gates
  • Boom barriers
  • Commercial driveways
  • Industrial entrances
  • Factory access roads
  • Warehouse entrances
  • Logistics facilities
  • Commercial car parks
  • Shared vehicle access lanes

The receiver must be connected to a compatible controller input and configured for the intended detection function.

📦 What’s Included?


The e-LOOP Commercial V4.0 Wireless Radar Vehicle Detection Kit contains:

Qty Component
1 e-LOOP Commercial V4.0 Wireless Radar Detection Module
1 e-Trans 50 Wireless Transceiver
1 Set Batteries for the e-LOOP Commercial Sensor

The standard commercial sensor uses four 3.6V lithium batteries.

Not Included Unless Separately Supplied

  • Gate or Boom Barrier Operator
  • Additional e-LOOP Detection Modules
  • External Safety Beams
  • Installation Labour
  • Site-Specific Cabling Between Receiver and Gate Controller

⭐ Key Features


  • Genuine e-LOOP Commercial V4.0
  • Wireless radar vehicle detection kit
  • Magnetic field and radar detection technology
  • Exit, Presence and Parking operating modes
  • No conventional induction loop required
  • No driveway saw-cutting for detection wiring
  • Surface-mounted commercial sensor
  • Includes e-Trans 50 wireless transceiver
  • Batteries included
  • Up to 50m wireless communication range
  • 433.39MHz operating frequency
  • 128-bit AES encrypted communication
  • Long-life battery operation
  • Up to 10 years battery life in Exit Mode under suitable conditions
  • IP68-rated sensor enclosure
  • Suitable for commercial and industrial applications
  • Compatible with suitable automatic gate and barrier controllers

🔧 Specifications


  • Manufacturer: AES Global
  • Product: e-LOOP Commercial V4.0
  • Model: EL00C-V4.0
  • Product Type: Wireless Vehicle Detection Kit
  • Detection Technology: Magnetometer and Radar
  • Operating Modes: Exit, Presence and Parking
  • Installation Type: Above-Ground / Surface Mounted
  • Wireless Frequency: 433.39MHz
  • Wireless Security: 128-bit AES Encryption
  • Wireless Range: Up to 50m
  • Sensor Protection Rating: IP68
  • Radar Detection Range: Up to Approximately 2m
  • Magnetometer Detection Range: Up to Approximately 1.5m
  • Sensor Battery Type: 3.6V Lithium
  • Sensor Battery Quantity: 4
  • Battery Life: Up to 10 Years in Exit Mode
  • Transceiver: e-Trans 50
  • Receiver Output: Relay
  • Application: Automatic Gates, Boom Barriers and Vehicle Access Control

🔗 Compatibility


The e-LOOP Commercial V4.0 can be integrated with suitable gate and barrier automation systems that support an appropriate external relay input.

Potential applications include:

  • Vehicle-triggered automatic opening
  • Vehicle presence monitoring
  • Commercial driveway access
  • Automatic exit control
  • Boom barrier activation

The receiver output must be configured to match the controller’s required input and intended operating function.

Compatibility must be confirmed before installation.

⚠️ Please Note


This product is the e-LOOP Commercial V4.0 Wireless Radar Vehicle Detection Kit supplied with an e-Trans 50 wireless transceiver and batteries.

The e-LOOP sensor communicates wirelessly with the transceiver. The transceiver still requires a suitable power supply and connection to the gate or barrier controller.

The system is designed for vehicle detection and is not intended to detect pedestrians reliably.

Presence Mode must not be used as the sole safety device for an automatic gate or barrier.

Additional safety devices, such as photoelectric safety beams, may be required depending on the installation.

Actual wireless range, detection performance and battery life depend on installation conditions and operating settings.

The system must be installed and configured according to the manufacturer’s instructions.

For assistance with compatibility, installation requirements or additional accessories, contact Delta Warringah Garage Doors on 1300 733 066.