Description
The Centsys D20 SMART 2000kg Industrial Sliding Gate Automation Kit is a heavy-duty automatic sliding gate system designed for large commercial, industrial and high-demand access control applications.
Engineered to automate sliding gates weighing up to 2000kg, the D20 SMART combines powerful 24V DC motor technology with intelligent electronic control, Bluetooth programming and advanced gate safety functions.
Designed for demanding installations, the D20 SMART provides controlled gate movement, adjustable operating parameters, electronic obstacle detection and programmable access control functionality.
The operator features Centsys SMART technology, allowing supported settings, commissioning and diagnostics to be managed through the MyCentsys Pro smartphone application.
This industrial automation kit includes the D20 SMART operator, two 12V 7.2Ah sealed maintenance-free batteries and four metres of steel-core reinforced nylon gate rack.
The operator is also supplied with its mounting foundation plate, mounting hardware and manual release keys.
Remote controls and the wireless receiver are not included and must be purchased separately.
⚙️ Heavy-Duty 2000kg Sliding Gate Automation
The Centsys D20 SMART is designed for industrial sliding gates weighing up to 2000kg.
Its heavy-duty motor and intelligent electronic control system make it suitable for large sliding gates requiring powerful and dependable automation.
Typical applications include:
- Industrial sliding gates
- Factory entrances
- Warehouses and distribution centres
- Commercial property entrances
- Logistics facilities
- Industrial estates
- Large commercial parking areas
- Heavy-duty security gates
- High-demand access control installations
The operator is designed for sliding gates operating on a suitable ground track with an appropriately rated rack-and-pinion drive system.
⚡ Powerful 24V DC Motor System
The D20 SMART uses a 24V DC motor system designed to provide powerful and controlled movement for heavy sliding gates.
The operator uses two 12V batteries connected in series to provide a nominal 24V DC supply.
Features include:
- Heavy-duty 24V DC motor system
- Suitable for sliding gates up to 2000kg
- Smooth acceleration and deceleration
- Adjustable opening and closing speeds
- Controlled gate movement
- Electronic travel limit management
- Battery-driven operation
- Battery backup capability
Actual operating performance depends on gate weight, mechanical condition, installation and controller settings.
📱 Bluetooth Programming with MyCentsys Pro
The D20 SMART incorporates Bluetooth connectivity for programming, commissioning and diagnostics through the Centsys MyCentsys Pro smartphone application.
The application provides convenient access to supported controller functions without requiring a conventional programming display.
Available functions include:
- Initial gate setup and commissioning
- Opening and closing speed adjustment
- Acceleration and deceleration settings
- Pedestrian opening configuration
- Automatic closing settings
- Safety input configuration
- Access control settings
- Diagnostic information
- Operating parameter adjustments
- Controller status monitoring
Bluetooth programming simplifies installation and provides convenient access to supported settings during maintenance.
🧠 Intelligent SMART Control System
The D20 SMART features an integrated electronic control system designed to manage gate movement, safety functions and access control.
The programmable controller provides flexible operating options for industrial sliding gate installations.
Features include:
- Intelligent motor control
- Electronic travel limit management
- Adjustable operating speeds
- Soft start and soft stop
- Programmable pedestrian opening
- Automatic closing capability
- Electronic obstacle detection
- Adjustable collision sensitivity
- Compatible safety device integration
- Bluetooth diagnostics and programming
The controller can be configured according to the gate’s mechanical characteristics and operating requirements.
🔋 Includes Two 12V 7.2Ah Batteries
This kit includes two 12V 7.2Ah sealed maintenance-free batteries.
The batteries are connected in series to provide the nominal 24V DC supply required by the D20 SMART operator.
Included battery components:
- 2 × 12V 7.2Ah Sealed Maintenance-Free Batteries
- Battery Part Number: A-CP4C2
- Nominal Battery System Voltage: 24V DC
- Battery Capacity: 7.2Ah
The batteries support normal DC motor operation and provide backup capability during mains power interruptions, subject to available battery charge and operating conditions.
No separate battery charger is required for this kit configuration.
Battery backup operating time depends on gate weight, operating frequency, battery condition and environmental conditions.
🛤️ Includes 4 Metres of Steel-Core Reinforced Nylon Rack
The kit includes four individual 1-metre lengths of steel-core reinforced nylon gate rack.
Each rack length features six downward-facing mounting lugs.
Included rack specifications:
- Part Number: A-AU.90
- Quantity: 4 Lengths
- Individual Length: 1 Metre
- Total Supplied Length: 4 Metres
- Construction: Steel-Core Reinforced Nylon
- Mounting: 6 Downward-Facing Lugs per Length
- Rack Rating: Suitable for Gates up to 800kg
The reinforced nylon rack provides the drive connection between the sliding gate and operator pinion.
Important Rack Capacity Information
Although the D20 SMART operator is rated for sliding gates up to 2000kg, the supplied A-AU.90 rack is specified for gates up to 800kg.
For installations where the gate exceeds the rack’s rated capacity, a suitably rated alternative rack must be selected.
Additional rack lengths may also be required depending on the gate length and travel.
📡 External Receiver Compatibility
The D20 SMART supports compatible external wireless receiver systems for remote-control operation.
A suitable receiver allows compatible transmitters to activate programmed gate functions.
Potential applications include:
- Full gate opening
- Pedestrian access
- Remote gate operation
- Additional access control functions
Receiver Not Included
This kit does not include a wireless receiver.
A compatible receiver must be purchased separately if remote-control operation is required.
The receiver must be selected according to the intended transmitter system and the operator’s supported access control connections.
🎮 Remote Controls Sold Separately
Remote controls are not included with the D20 SMART kit.
Compatible transmitters can be selected to suit the receiver installed with the operator.
Benefits of selecting the receiver and transmitters separately include:
- Flexible access control configuration
- Choice of compatible transmitter systems
- Ability to select the required number of remotes
- Integration with existing compatible access control equipment
The receiver and transmitter system must be confirmed before ordering.
🛡️ Intelligent Obstacle Detection
The D20 SMART incorporates electronic obstacle detection designed to monitor resistance during gate movement.
If abnormal resistance is detected, the controller can respond according to its programmed safety settings.
Features include:
- Electronic obstacle detection
- Adjustable collision sensitivity
- Programmable safety responses
- Controlled gate movement
- Support for compatible external safety devices
Obstacle detection is a supplementary safety function and does not replace correctly installed photoelectric safety beams or other protective devices.
👁️ Safety Beam Compatibility
The D20 SMART supports compatible safety devices designed to detect obstructions around the gate opening.
Potential accessories include the Centsys Photon SMART Wireless Safety Beam Kit, subject to controller compatibility.
The Photon SMART system uses battery-powered transmitter and receiver units with wireless communication to compatible Centsys SMART controllers.
Safety beams are not included in this automation kit.
Industrial gate installations may require additional safety devices depending on the gate design, operating environment and applicable safety requirements.
🚶 Pedestrian Opening & Automatic Closing
The D20 SMART supports programmable pedestrian opening, allowing the gate to open partially for pedestrian access.
Typical applications include:
- Employee pedestrian entry
- Personnel access points
- Industrial site access
- Commercial property entrances
- Reducing unnecessary full gate movement
The operator also supports automatic closing, allowing the gate to close after a programmed delay where the installation and safety configuration permit.
These functions can be configured through the SMART control system.
🔓 Manual Release for Emergency Access
The D20 SMART features a manual release mechanism that allows the gate to be disengaged from the operator when required.
This enables manual gate movement during maintenance, equipment faults or situations where powered operation is unavailable.
Manual release keys are included with the operator package.
Because the D20 SMART may be installed on very heavy gates, manual movement must be undertaken carefully and in accordance with the manufacturer’s instructions.
🏭 Industrial & Commercial Applications
The D20 SMART is suitable for heavy-duty sliding gate installations where a high-capacity operator is required.
Typical applications include:
- Industrial facilities
- Distribution centres
- Logistics depots
- Manufacturing plants
- Commercial warehouses
- Large commercial entrances
- Industrial security gates
- Heavy-duty access control installations
Gate weight, travel length, operating frequency and mechanical condition must be assessed before selecting the appropriate operator.
📦 What’s Included?
The Centsys D20 SMART Industrial Sliding Gate Automation Kit (A-D20SMKIT) contains:
| Qty | Part Number | Description |
|---|---|---|
| 1 | A-D20RSMARTB00_AU | Centsys D20 SMART 2000kg Industrial Sliding Gate Operator |
| 4 | A-AU.90 | 1m Steel-Core Reinforced Nylon Gate Rack with 6 Downward-Facing Lugs |
| 2 | A-CP4C2 | 12V 7.2Ah Sealed Maintenance-Free Battery |
The D20 SMART operator package also includes:
- Integrated SMART Control System
- Mounting Foundation Plate
- Operator Mounting Hardware
- Manual Release Keys
Not Included
- Wireless Receiver
- Remote Control Transmitters
- Photoelectric Safety Beams
- Additional Gate Rack Beyond the Supplied 4m
- Alternative Heavy-Duty Rack for Gates Exceeding 800kg
- Electrical Supply Installation
- Additional Access Control Accessories
- Installation Labour
⭐ Key Features
- Genuine Centsys D20 SMART 2000kg Industrial Sliding Gate Automation Kit
- Manufacturer Kit SKU: A-D20SMKIT
- Suitable for sliding gates up to 2000kg
- Heavy-duty industrial sliding gate operator
- Powerful 24V DC motor system
- Includes 2 × 12V 7.2Ah sealed maintenance-free batteries
- Includes 4 × 1m steel-core reinforced nylon gate rack
- Bluetooth programming through MyCentsys Pro
- Integrated intelligent SMART control system
- Adjustable opening and closing speeds
- Smooth acceleration and deceleration
- Electronic travel limit management
- Intelligent obstacle detection
- Programmable pedestrian opening
- Automatic closing capability
- Battery backup capability
- Compatible with supported SMART safety accessories
- Includes mounting foundation plate and hardware
- Includes manual release keys
- No separate battery charger required
- Wireless receiver sold separately
- Remote controls sold separately
- Suitable for commercial and industrial sliding gates
🔧 Specifications
- Manufacturer: Centsys / Centurion Systems
- Kit Model: D20 SMART Industrial Kit
- Kit SKU: A-D20SMKIT
- Operator Model: D20 SMART
- Operator SKU: A-D20RSMARTB00_AU
- Product Type: Industrial Sliding Gate Automation Kit
- Maximum Gate Weight: 2000kg
- Motor Type: DC
- Motor Operating Voltage: 24V DC
- Battery Configuration: 2 × 12V Batteries in Series
- Nominal Battery System Voltage: 24V DC
- Battery Capacity: 7.2Ah
- Battery Type: Sealed Maintenance-Free
- Battery SKU: A-CP4C2
- Batteries Included: Yes
- Separate Charger Required: No
- Rack Type: Steel-Core Reinforced Nylon
- Rack SKU: A-AU.90
- Rack Quantity: 4 × 1m Lengths
- Total Rack Supplied: 4m
- Rack Rating: 800kg
- Rack Mounting: 6 Downward-Facing Lugs per Length
- Control System: Integrated SMART Controller
- Programming: Bluetooth / MyCentsys Pro
- Wireless Receiver Included: No
- Remote Controls Included: No
- Pedestrian Opening: Supported
- Automatic Closing: Supported
- Obstacle Detection: Electronic
- Speed Adjustment: Programmable
- Travel Limit Control: Electronic
- Safety Beam Support: Subject to Compatibility
- Manual Release: Yes
- Mounting Accessories Included: Yes
- Application: Industrial & Commercial Sliding Gates
🔗 Compatibility
Sliding Gate Requirements
The D20 SMART operator is designed for suitable sliding gates weighing up to 2000kg.
The installation requires:
- Suitable heavy-duty sliding gate track and wheels
- Correctly installed mechanical end stops
- Appropriately rated gate rack
- Suitable operator foundation
- Appropriate electrical supply
- Correctly installed safety equipment
Four metres of A-AU.90 reinforced nylon rack are supplied.
The included rack has a specified 800kg rating. Gates exceeding this rack rating require an appropriately rated alternative.
Additional rack may be required depending on the gate length and travel.
Compatible Receiver & Remote Controls
The D20 SMART supports compatible external wireless receiver and transmitter systems.
Both the receiver and remote controls are excluded from this kit and must be purchased separately where required.
Receiver compatibility must be confirmed against the operator’s access control connections.
Compatible Safety Accessories
The D20 SMART supports compatible safety accessories, including selected Centsys SMART safety devices, subject to controller compatibility.
Additional protective devices may be required for industrial installations.
⚠️ Please Note
This product is the genuine Centsys D20 SMART 2000kg Industrial Sliding Gate Automation Kit, SKU A-D20SMKIT.
The kit includes the D20 SMART operator, two 12V 7.2Ah sealed maintenance-free batteries and four metres of steel-core reinforced nylon gate rack.
The operator package also includes mounting accessories and manual release keys.
Wireless receiver and remote controls are not included and must be purchased separately.
No separate battery charger is required for this kit configuration.
The D20 SMART operator is rated for sliding gates up to 2000kg.
The included A-AU.90 nylon rack is rated for gates up to 800kg. An appropriately rated alternative rack is required where the gate exceeds this rating.
The supplied four metres of rack may not be sufficient for every gate installation.
Photoelectric safety beams and additional protective devices may be required depending on the installation.
Industrial gate installations must be assessed for appropriate mechanical and electrical safety measures.
The gate must be mechanically sound, correctly aligned and able to move freely before a
