Description
The Centsys D6 SMART 600kg Sliding Gate Automation Kit is a powerful, high-speed automatic sliding gate system designed for residential, shared driveway and light commercial applications.
Featuring a 24V DC motor system, advanced Centsys SMART technology and Bluetooth programming through the MyCentsys Pro smartphone application, the D6 SMART delivers smooth, intelligent and reliable automation for sliding gates weighing up to 600kg.
Designed for installations with a 240V mains supply available at the gate, this complete automation kit includes the D6 SMART operator, DX 27.4V battery charger, two 12V 7.2Ah sealed maintenance-free batteries and four metres of steel-core reinforced nylon gate rack.
The operator package also includes an integrated SMART control PCB, NOVA receiver, two genuine NOVA four-button transmitters, mounting foundation plate, mounting hardware and manual release keys.
With intelligent obstacle detection, adjustable operating speeds, programmable pedestrian access and battery backup capability, the D6 SMART provides a comprehensive automation solution for demanding residential and light commercial sliding gate installations.
⚙️ Complete 240V Sliding Gate Automation Kit
The D6 SMART 240V Kit combines the essential operator, power supply, battery and drive components required for a typical automatic sliding gate installation.
Unlike the operator-only configuration, this kit includes the compatible charging system, two batteries and four individual lengths of reinforced nylon gate rack.
The kit is designed for installations where a suitable 240V mains power supply is available at the gate operator.
Benefits include:
- Complete operator, charger, battery and rack package
- Suitable for sliding gates up to 600kg
- Designed for 240V mains supply installations
- 24V DC motor and battery system
- Includes two 12V 7.2Ah batteries
- Includes 4 metres of reinforced nylon gate rack
- Includes two genuine NOVA four-button transmitters
- Bluetooth programming through MyCentsys Pro
- Intelligent electronic gate control
- Battery backup capability
Additional gate rack or safety accessories may be required depending on the installation.
⚡ Powerful 24V DC Gate Automation
The D6 SMART uses a 24V DC motor system designed to provide responsive and controlled sliding gate movement.
The motor operates using two 12V batteries connected in series to provide a nominal 24V DC supply.
Benefits include:
- Powerful 24V DC motor operation
- Smooth acceleration and deceleration
- Adjustable opening and closing speeds
- Controlled gate movement
- Electronic travel limit management
- Battery-driven operation
- Suitable for gates weighing up to 600kg
The 24V system provides the operating platform for the D6 SMART’s intelligent motor control and battery backup functions.
Actual operating performance depends on gate weight, mechanical condition, installation and controller settings.
📱 Bluetooth Programming with MyCentsys Pro
The D6 SMART incorporates Bluetooth connectivity for programming, commissioning and diagnostics using the Centsys MyCentsys Pro smartphone application.
The application provides an intuitive interface for configuring supported operator functions without requiring a conventional control board programming display.
Available functions include:
- Initial gate setup and commissioning
- Opening and closing speed adjustment
- Acceleration and deceleration settings
- Pedestrian opening configuration
- Automatic closing settings
- Safety input configuration
- Remote-control management
- Diagnostic information
- Gate operating parameters
- Controller status monitoring
Bluetooth programming simplifies installation and provides convenient access to supported settings during future maintenance.
🧠 Intelligent SMART Control System
The D6 SMART features an integrated electronic control PCB designed to manage gate movement, safety functions and access control.
Its intelligent controller provides flexible programming options to suit different sliding gate installations.
Features include:
- Intelligent motor control
- Electronic travel limit management
- Adjustable opening and closing speeds
- Soft start and soft stop
- Programmable pedestrian opening
- Automatic closing capability
- Electronic obstacle detection
- Adjustable collision sensitivity
- Compatible safety device integration
- Bluetooth diagnostics and programming
The controller allows the operator to be configured according to the gate’s mechanical characteristics and operating requirements.
🔋 Includes Two 12V Batteries & DX 240V Charger
This kit includes the Centsys DX 240V charger and two 12V 7.2Ah sealed maintenance-free batteries.
The batteries are connected in series to provide the nominal 24V DC supply required by the D6 SMART operator.
The DX charger provides a regulated 27.4V DC output with a rated charging current of 1.8A.
Included power components:
- 1 × Centsys DX 240V Charger – 27.4V, 1.8A
- Charger Part Number: A-DX2CHGRV00
- 2 × 12V 7.2Ah Sealed Maintenance-Free Batteries
- Battery Part Number: A-CP4C2
The charger is the complete mains charging unit supplied with this kit. No additional powerpack is required for the specified 240V configuration.
Battery Backup Capability
The battery system allows the operator to continue functioning during mains power interruptions, subject to available battery charge and operating conditions.
Benefits include:
- Compatible 240V charging equipment included
- Two 12V batteries included
- Nominal 24V battery system
- Battery backup capability
- No separate battery purchase required
- Suitable for installations with mains power at the gate
Battery backup operating time depends on gate weight, operating frequency, battery condition and environmental conditions.
🛤️ Includes 4 Metres of Reinforced Nylon Gate Rack
The kit includes four individual 1-metre lengths of steel-core reinforced nylon gate rack.
Each rack length features six downward-facing mounting lugs and is rated for suitable gates up to 800kg.
Included rack specifications:
- Part Number: A-AU.90
- Quantity: 4 Lengths
- Individual Length: 1 Metre
- Total Supplied Length: 4 Metres
- Construction: Steel-Core Reinforced Nylon
- Mounting: 6 Downward-Facing Lugs per Length
- Rack Rating: Suitable for Gates up to 800kg
The reinforced nylon rack provides a durable drive connection between the sliding gate and operator pinion.
Additional rack lengths may be required depending on the overall gate length and required travel.
📡 Integrated NOVA Receiver
The D6 SMART includes an integrated Centsys NOVA receiver for compatible wireless remote-control operation.
The NOVA system uses code-hopping technology to provide secure and convenient access control.
Benefits include:
- Integrated wireless receiver
- Centsys NOVA code-hopping technology
- Remote gate operation
- Programmable transmitter functions
- Pedestrian opening capability
- Support for additional compatible transmitters
A separate receiver is not required for standard operation with the included NOVA transmitters.
🎮 Includes Two NOVA Four-Button Transmitters
This kit includes two genuine Centsys NOVA four-button remote controls.
Each transmitter provides four programmable buttons that can be assigned to compatible receiver functions.
Features include:
- 2 × genuine NOVA four-button transmitters
- Secure code-hopping wireless transmission
- Four programmable buttons per transmitter
- Compact handheld design
- Compatible with the integrated NOVA receiver
- Suitable for everyday gate access
Additional compatible transmitters can be programmed as required.
🛡️ Intelligent Obstacle Detection
The D6 SMART incorporates electronic obstacle detection designed to monitor resistance during gate movement.
If abnormal resistance is detected, the controller can respond according to its programmed safety settings.
Features include:
- Electronic obstacle detection
- Adjustable collision sensitivity
- Programmable safety responses
- Controlled gate movement
- Support for compatible external safety devices
Obstacle detection is a supplementary safety function and does not replace correctly installed photoelectric safety beams or other protective devices.
👁️ Safety Beam Compatibility
The D6 SMART supports compatible safety devices designed to detect obstructions around the gate opening.
Compatible accessories include the Centsys Photon SMART Wireless Safety Beam Kit, subject to the controller’s supported configuration.
The Photon SMART system uses battery-powered transmitter and receiver units with wireless communication to compatible Centsys SMART controllers.
Safety beams are not included in this automation kit.
The appropriate safety equipment must be selected according to the gate installation and applicable safety requirements.
🚶 Pedestrian Opening & Automatic Closing
The D6 SMART supports programmable pedestrian opening, allowing the gate to open partially for pedestrian access.
This is useful for:
- Pedestrian entry and exit
- Bicycle access
- Small deliveries
- Shared driveway applications
- Reducing unnecessary full gate movement
The operator also supports automatic closing, allowing the gate to close after a programmed delay where the installation and safety configuration permit.
These functions can be configured through the SMART control system.
🔓 Manual Release for Emergency Access
The D6 SMART features a manual release mechanism that allows the gate to be disengaged from the operator when required.
This enables manual gate movement during maintenance, equipment faults or situations where powered operation is unavailable.
Two manual release keys are included with the operator package.
The gate must be correctly installed and able to move freely along its track for safe manual operation.
🌧️ Weather-Resistant Outdoor Construction
The D6 SMART features a durable enclosure designed for outdoor sliding gate installations.
Its weather-resistant construction protects the operator’s internal components when correctly installed according to the manufacturer’s requirements.
Benefits include:
- Durable outdoor motor enclosure
- Protection against typical environmental exposure
- Integrated operator design
- Suitable for residential and light commercial entrances
- Designed for permanent gate automation installations
The operator must be mounted on a suitable foundation with adequate drainage and clearance.
🏠 Residential & Light Commercial Applications
The D6 SMART is suitable for a wide range of sliding gate installations.
Typical applications include:
- Residential driveway gates
- Townhouse complexes
- Duplex properties
- Shared driveways
- Apartment entrances
- Private parking areas
- Small commercial premises
- Light commercial access gates
- Existing sliding gate automation upgrades
Gate weight, travel length, operating frequency and mechanical condition must be assessed before selecting the appropriate operator.
📦 What’s Included?
The Centsys D6 SMART 240V Kit (A-D6S240KIT) contains:
| Qty | Part Number | Description |
|---|---|---|
| 1 | A-D6SMARTF00_AU | Centsys D6 SMART Sliding Gate Operator |
| 1 | A-DX2CHGRV00 | DX 240V Charger – 27.4V, 1.8A |
| 4 | A-AU.90 | 1m Steel-Core Reinforced Nylon Gate Rack with 6 Downward-Facing Lugs |
| 2 | A-CP4C2 | 12V 7.2Ah Sealed Maintenance-Free Battery |
The D6 SMART operator package also includes:
- Integrated SMART Control PCB
- Integrated NOVA Receiver
- 2 × Genuine NOVA Four-Button Transmitters
- 2 × Manual Release Keys
- Mounting Foundation Plate
- Operator Mounting Hardware
Not Included
- Photoelectric Safety Beams
- Additional Gate Rack Beyond the Supplied 4m
- 240V Electrical Supply Installation
- Additional Access Control Accessories
- Installation Labour
⭐ Key Features
- Genuine Centsys D6 SMART 600kg Sliding Gate Automation Kit
- Manufacturer Kit SKU: A-D6S240KIT
- Suitable for sliding gates up to 600kg
- Designed for 240V mains supply at the gate
- Powerful 24V DC motor system
- Includes DX 240V / 27.4V, 1.8A charger
- Includes 2 × 12V 7.2Ah sealed maintenance-free batteries
- Includes 4 × 1m reinforced nylon gate rack
- Bluetooth programming through MyCentsys Pro
- Integrated SMART control PCB
- Integrated NOVA code-hopping receiver
- Includes 2 × NOVA four-button transmitters
- Includes 2 × manual release keys
- Includes mounting foundation plate and hardware
- Adjustable opening and closing speeds
- Smooth acceleration and deceleration
- Electronic travel limit management
- Intelligent obstacle detection
- Programmable pedestrian opening
- Automatic closing capability
- Battery backup capability
- Compatible with supported SMART safety accessories
- Weather-resistant outdoor construction
- Suitable for residential and light commercial sliding gates
🔧 Specifications
- Manufacturer: Centsys / Centurion Systems
- Kit Model: D6 SMART 240V Kit
- Kit SKU: A-D6S240KIT
- Operator Model: D6 SMART
- Operator SKU: A-D6SMARTF00_AU
- Product Type: Sliding Gate Automation Kit
- Maximum Gate Weight: 600kg
- Motor Type: DC
- Motor Operating Voltage: 24V DC
- Mains Supply: 240V AC
- Charger: DX 240V / 27.4V, 1.8A
- Charger SKU: A-DX2CHGRV00
- Battery Configuration: 2 × 12V Batteries in Series
- Nominal Battery System Voltage: 24V DC
- Battery Capacity: 7.2Ah
- Battery Type: Sealed Maintenance-Free
- Battery SKU: A-CP4C2
- Batteries Included: Yes
- Rack Type: Steel-Core Reinforced Nylon
- Rack SKU: A-AU.90
- Rack Quantity: 4 × 1m Lengths
- Total Rack Supplied: 4m
- Rack Mounting: 6 Downward-Facing Lugs per Length
- Control System: Integrated SMART PCB
- Programming: Bluetooth / MyCentsys Pro
- Receiver: Integrated Centsys NOVA
- Included Transmitters: 2 × NOVA Four-Button
- Pedestrian Opening: Supported
- Automatic Closing: Supported
- Obstacle Detection: Electronic
- Speed Adjustment: Programmable
- Travel Limit Control: Electronic
- Safety Beam Support: Yes, Subject to Compatibility
- Manual Release: Yes
- Manual Release Keys Included: 2
- Foundation Plate Included: Yes
- Application: Residential & Light Commercial Sliding Gates
🔗 Compatibility
Sliding Gate Requirements
The D6 SMART is designed for suitable sliding gates weighing up to 600kg.
The installation requires:
- Suitable sliding gate track and wheels
- Correctly installed mechanical end stops
- Properly aligned gate rack
- Suitable operator foundation
- 240V mains supply at the gate
- Appropriate safety equipment
Four metres of reinforced nylon rack are supplied.
Additional rack may be required depending on the gate length and travel.
Compatible Remote Controls
The integrated NOVA receiver supports compatible Centsys NOVA code-hopping transmitters, including:
- Centsys NOVA One-Button Transmitter
- Centsys NOVA Two-Button Transmitter
- Centsys NOVA Four-Button Transmitter
Two NOVA four-button transmitters are included.
Compatible Safety Accessories
The D6 SMART supports compatible Centsys SMART safety accessories, including the Photon SMART Wireless Safety Beam Kit, subject to the controller’s supported configuration.
Additional compatible access control and safety devices may be connected according to the manufacturer’s requirements.
⚠️ Please Note
This product is the genuine Centsys D6 SMART 600kg Sliding Gate Automation Kit with 240V mains supply configuration, SKU A-D6S240KIT.
The kit includes the D6 SMART operator, DX 240V charger, two 12V 7.2Ah batteries and four metres of reinforced nylon gate rack.
The operator package also includes two NOVA four-button transmitters, two manual release keys, mounting foundation plate and mounting hardware.
The D6 SMART uses a nominal 24V DC battery system consisting of two 12V batteries connected in series.
The included DX charger provides the required 27.4V charging output and is the complete mains charging unit for this kit.
This kit is intended for installations with a suitable 240V mains supply available at the gate.
The maximum gate weight is 600kg, subject to suitable gate construction, mechanical condition and installation requirements.
The supplied four metres of rack may not be sufficient for every gate installation.
Photoelectric safety beams and additional protective devices may be required depending on the installation.
The gate must be mechanically sound, correctly aligned and able to move freely before automation.
240V electrical connections must be completed by an appropriately licensed electrician.
Gate automation installation and commissioning must comply with Centsys instructions and applicable Australian safety requirements.
For assistance selecting additional rack, safety beams or compatible accessories, contact our Technical Support team on 1300 733 066.
