Description
The ATA EAT-2V2 Easy Access Transmitter is a genuine ATA wireless transmitter designed to provide a convenient garage door control directly from the opener’s manual-release cord.
Rather than being carried as a conventional keyring remote, the EAT-2V2 hangs from the garage door opener inside the garage, providing an easily accessible control button whenever the door needs to be operated from inside.
Using ATA TrioCode 128 wireless technology, the EAT-2V2 is compatible with a wide range of ATA garage door and gate automation equipment.
ATA Part Number: 62496
🎮 Easy Access Transmitter
EAT stands for Easy Access Transmitter.
The EAT-2V2 has been specifically designed to remain conveniently accessible inside the garage rather than being carried around like a conventional handheld remote.
Its cord allows the transmitter to hang from the garage door opener’s manual-release mechanism, positioning the operating button within easy reach.
This makes it particularly convenient when entering or leaving the garage without a handheld transmitter.
🪢 Manual Release Cord Installation
The EAT-2V2 is designed to form part of the garage door opener’s manual-release pull-cord arrangement.
The transmitter hangs from the release cord, allowing it to serve two useful purposes:
- Convenient wireless garage door control
- Accessible manual-release pull cord
This provides a neat solution without requiring a separate wall-mounted transmitter beside the garage door.
🔘 Single-Button Operation
The EAT-2V2 features a large single-button design.
For a typical garage door installation, pressing the button sends the operating command to the compatible ATA opener.
Depending on the opener and its current position, this is generally used to cycle the garage door through its normal open, stop and close operation.
The large-button format makes the transmitter easy to locate and operate inside the garage.
📡 TrioCode 128 Technology
The EAT-2V2 uses ATA TrioCode 128 wireless transmitter technology.
This is the same transmitter family used by a range of compatible ATA handheld remotes, wall controls and wireless accessories.
The transmitter must be programmed into the compatible garage door opener or receiver before use.
🔐 Rolling Code Security
TrioCode 128 uses rolling-code technology.
Rather than repeatedly transmitting a fixed radio code, the system uses changing coded transmissions between the transmitter and compatible receiver.
This helps protect the automation system against unauthorised operation through simple code-copying or replay techniques.
🚪 Ideal for Inside the Garage
The EAT-2V2 is particularly useful as a permanently available transmitter inside the garage.
Common applications include:
- Opening the garage door before driving out
- Closing the door after returning home
- Operating the door while working inside the garage
- Providing an additional control point
- Replacing a damaged or missing original EAT transmitter
- Providing convenient control without carrying a handheld remote
Because the transmitter remains attached to the opener’s release cord, it is less likely to be misplaced than a conventional handheld remote.
🔋 Replaceable CR2032 Battery
The EAT-2V2 is powered by a replaceable CR2032 lithium coin-cell battery.
The battery is contained inside the transmitter housing and can be replaced when required.
A battery is supplied with the complete transmitter.
🌀 Roller Door Opener Compatibility
The EAT-2V2 is compatible with a range of ATA TrioCode roller door openers.
Compatible models include:
- ATA GDO-6V3 EasyRoller
- ATA GDO-6V4 EasyRoller
- ATA GDO-8V3 ShedMaster
- ATA GDO-10V2 Toro
- ATA GDO-10V3 Toro
- ATA GDO-12 Hiro
This makes the EAT-2V2 particularly useful as a replacement hanging transmitter for compatible EasyRoller and other ATA roller door installations.
🚪 Sectional Door Opener Compatibility
The EAT-2V2 is also compatible with selected ATA sectional garage door openers.
Compatible models include:
- ATA GDO-7V2 SecuraLift
- ATA GDO-7V3 SecuraLift
- ATA GDO-9V2 Enduro
- ATA GDO-9V3 Dynamo
- ATA GDO-11V1 Ero
- ATA GDO-11V3 Ero
- ATA Tempo ATS-2
- ATA Synchro ATS-3
Compatibility is determined by the receiver technology used by the opener.
🚧 Gate & Receiver Compatibility
Although commonly used as a hanging garage door transmitter, the EAT-2V2 communicates using ATA TrioCode 128 technology and can also be programmed to compatible ATA gate operators and receivers.
Compatible equipment includes selected:
- NeoSlider gate operators
- ATA swing gate systems
- ATA gate controllers
- ATA TrioCode 128 stand-alone receivers
Its physical cord design is primarily intended for garage door applications, but the transmitter itself operates as a compatible TrioCode 128 wireless control.
🔄 Replacement EAT-2V2
The 62496 is suitable when replacing an existing EAT-2V2 that has been lost, damaged or has failed electronically.
A replacement transmitter will need to be programmed into the garage door opener or receiver before it can operate the system.
If the existing EAT-2V2 still operates correctly and only its plastic housing is damaged, the enclosure can also be replaced separately.
The replacement enclosure set is:
- ATA EAT-2V2 Enclosure Set
- Part Number 65097
This allows the original electronics to be retained where only the external housing requires replacement.
🛠️ Simple Programming
The EAT-2V2 is programmed into the compatible ATA opener or receiver using its transmitter coding procedure.
The exact programming process depends on the opener or receiver model.
Once successfully programmed, the EAT-2V2 operates wirelessly without requiring any electrical connection between the transmitter and the garage door opener.
The cord is mechanical only and does not carry the transmitter signal.
📦 Complete Transmitter Pack
Unlike an enclosure-only replacement, part number 62496 is supplied as a complete functioning transmitter.
The pack includes:
- 1 × ATA EAT-2V2 Easy Access Transmitter
- 1 × Cord
- 1 × CR2032 Lithium Battery
The transmitter will require programming to the compatible opener or receiver before use.
⭐ Key Features
- Genuine ATA transmitter
- Model EAT-2V2
- ATA part number 62496
- Easy Access Transmitter
- Single-button operation
- TrioCode 128 technology
- Rolling-code wireless operation
- Designed to hang from the manual-release cord
- Provides convenient control inside the garage
- Complete functioning transmitter
- Cord included
- CR2032 lithium battery included
- Replaceable battery
- Compatible with selected ATA roller door openers
- Compatible with selected ATA sectional door openers
- Compatible with selected ATA gate operators
- Compatible with suitable TrioCode 128 receivers
- Replacement enclosure separately available
- Ideal replacement for damaged or missing EAT-2V2 transmitters
🔧 Specifications
- Manufacturer: Automatic Technology Australia
- Brand: ATA
- Model: EAT-2V2
- Product: Easy Access Transmitter
- ATA Part Number: 62496
- Product Type: Wireless Transmitter
- Number of Buttons: 1
- Wireless Technology: TrioCode 128
- Power Supply: Battery
- Battery Type: CR2032 Lithium
- Battery Included: Yes
- Approximate Transmitter Dimensions: 42 × 42 × 35 mm
- Approximate Weight: 32 g including cord and warning label
- Programming Method: Learn to compatible receiver
- Replacement Enclosure: ATA 65097
🔗 Compatibility
The ATA EAT-2V2 is compatible with selected ATA TrioCode 128 garage door and gate automation systems.
Roller Door Openers
- GDO-6V3 EasyRoller
- GDO-6V4 EasyRoller
- GDO-8V3 ShedMaster
- GDO-10V2 Toro
- GDO-10V3 Toro
- GDO-12 Hiro
Sectional Door Openers
- GDO-7V2 SecuraLift
- GDO-7V3 SecuraLift
- GDO-9V2 Enduro
- GDO-9V3 Dynamo
- GDO-11V1 Ero
- GDO-11V3 Ero
- Tempo ATS-2
- Synchro ATS-3
Gate Operators & Controllers
- NES-24V1 NeoSlider
- NES-24V3 NeoSlider
- NES-500 NeoSlider
- NES-800 NeoSlider
- DCB-05 Gate Controller
- SGO-1 Elite
The EAT-2V2 is also compatible with suitable ATA TrioCode 128 receivers.
⚠️ Please Note
This product is the complete ATA EAT-2V2 Easy Access Transmitter Pack, part number 62496.
It should not be confused with ATA part number 65097, which is the replacement EAT-2V2 enclosure only.
A new EAT-2V2 transmitter must be programmed into the compatible garage door opener, gate operator or receiver before use.
Always confirm that the existing automation system uses compatible ATA TrioCode 128 technology before ordering.
The EAT-2V2 contains a CR2032 lithium coin-cell battery.
Button and coin-cell batteries can cause serious injury if swallowed or inserted into the body. Keep new and used batteries out of reach of children and ensure the transmitter’s battery compartment is correctly secured.
If a battery is suspected to have been swallowed or inserted, seek urgent medical assistance and contact the Australian Poisons Information Centre on 13 11 26.
