Description
The ATA EAT-2V2 Enclosure Set is a genuine replacement housing for the ATA EAT-2V2 Easy Access Transmitter.
Designed for EAT-2V2 transmitters with a damaged, cracked or worn enclosure, this replacement set allows the existing electronic circuit board to be transferred into a new housing rather than replacing the complete transmitter.
The enclosure set includes the top and bottom case components required to replace the external housing of a compatible EAT-2V2 transmitter.
ATA Part Number: 65097
🏠 Genuine Replacement Enclosure
The EAT-2V2 Enclosure Set is designed specifically as a replacement housing for the ATA EAT-2V2 transmitter.
It is ideal where the transmitter electronics are still operating correctly but the external enclosure has become:
- Cracked
- Broken
- Damaged
- Worn
- Discoloured
- Difficult to operate due to enclosure wear
Replacing the enclosure can restore the physical condition and usability of the transmitter without purchasing a complete new remote.
📦 Enclosure Only
This product is the enclosure set only.
It does not include the electronic components required to operate as a transmitter.
The existing EAT-2V2 electronics must be transferred from the original transmitter into the replacement enclosure.
🔧 Includes Top & Bottom Case
The replacement enclosure set includes:
- 1 × Top Case
- 1 × Bottom Case
These components form the replacement external housing for the compatible EAT-2V2 transmitter.
🚫 Electronics Not Included
The ATA 65097 is not a complete functioning remote control.
The following components are not included:
- Electronic circuit board
- Transmitter electronics
- Battery
- Complete programmed transmitter
You must already have a compatible EAT-2V2 transmitter with serviceable electronics to use this enclosure set.
🔄 Reuse Your Existing Circuit Board
If the original transmitter still operates correctly but its case has been damaged, the internal electronic circuit board can be transferred into the replacement enclosure.
This provides a cost-effective alternative to replacing the entire transmitter.
Because the original electronics are retained, replacing the enclosure does not itself change the transmitter’s existing coding or programming.
🎮 Designed for EAT-2V2
The 65097 enclosure is specifically designed for the:
- ATA EAT-2V2 Easy Access Transmitter
It should not be assumed to fit earlier EAT transmitter versions.
ATA has produced different EAT transmitter and enclosure designs, and the internal circuit-board mounting arrangements can differ between versions.
🔴 Identify the Correct EAT Version
It is important to identify the existing transmitter before ordering an enclosure.
The EAT range has been produced in different versions with different enclosure and internal mounting arrangements.
The replacement case must match the transmitter version.
This enclosure is specifically for the EAT-2V2.
🛠️ Ideal for Cracked Remote Cases
Remote-control enclosures can become damaged after years of regular use.
Common problems include:
- Cracked plastic
- Broken housing
- Worn button area
- Loose enclosure sections
- Damage from being dropped
- General wear from regular operation
Where the electronics remain serviceable, replacing the enclosure can extend the useful life of the transmitter.
♻️ Avoid Replacing a Working Transmitter
A damaged case does not necessarily mean the complete transmitter needs to be replaced.
If the existing EAT-2V2 circuit board remains operational, the enclosure set allows the usable electronics to be retained.
This can provide a simple and economical repair while avoiding the need to replace and program a complete new transmitter.
🔐 Existing Programming Retained
The transmitter’s coding is stored within its electronic components rather than the plastic enclosure.
When the original circuit board is transferred into the replacement housing, the transmitter normally retains its existing programming.
There should therefore be no need to reprogram the transmitter simply because the enclosure has been replaced.
🔩 Simple Enclosure Replacement
Replacement involves transferring the serviceable internal components from the existing EAT-2V2 into the new enclosure.
Care should be taken when opening the original transmitter to avoid damaging:
- Circuit board
- Battery connections
- Button components
- Internal mounting points
The electronics should be correctly seated within the replacement enclosure before the case is closed.
⭐ Key Features
- Genuine ATA replacement enclosure
- Designed for EAT-2V2
- ATA part number 65097
- Replacement transmitter housing
- Includes top case
- Includes bottom case
- Ideal for cracked enclosures
- Ideal for broken enclosures
- Ideal for worn transmitter cases
- Reuses the existing electronic circuit board
- Cost-effective alternative to replacing a complete working transmitter
- Existing transmitter programming can be retained
- Genuine replacement component
- Electronics not included
- Battery not included
🔧 Specifications
- Manufacturer: Automatic Technology Australia
- Brand: ATA
- Product: EAT-2V2 Enclosure Set
- ATA Part Number: 65097
- Product Type: Replacement Transmitter Enclosure
- Compatible Transmitter: EAT-2V2
- Top Case Included: Yes
- Bottom Case Included: Yes
- Circuit Board Included: No
- Transmitter Electronics Included: No
- Battery Included: No
- Complete Transmitter: No
📦 What’s Included
The ATA EAT-2V2 Enclosure Set includes:
- 1 × EAT-2V2 Top Enclosure
- 1 × EAT-2V2 Bottom Enclosure
Existing transmitter electronics must be transferred into the replacement enclosure.
🔗 Compatibility
Designed specifically for:
- ATA EAT-2V2 Easy Access Transmitter
ATA Part Number:
- 65097
This enclosure should only be used with a compatible EAT-2V2 transmitter.
Other EAT transmitter versions may use different enclosure designs and internal circuit-board mounting arrangements.
⚠️ Please Note
This product is the replacement enclosure only.
It is not a complete or functioning transmitter.
No electronic circuit board is included.
No battery is included.
The existing electronics from a compatible ATA EAT-2V2 transmitter must be transferred into this enclosure.
This product is intended for situations where the existing transmitter electronics are still operational but the external case has become damaged or worn.
Confirm that your existing transmitter is an EAT-2V2 before ordering, as other EAT transmitter versions may use different enclosures.
