Description
The ATA WTX-6 Wireless Wall Controller is a genuine ATA four-button wireless wall-mounted transmitter designed for convenient operation of compatible ATA garage door and automatic gate openers.
Using ATA’s TrioCode 128 wireless technology, the WTX-6 provides the functionality of a handheld remote in a convenient wall-mounted format without requiring control wiring between the wall controller and the opener.
With four programmable buttons, the WTX-6 can control multiple functions or compatible operators from a single wall-mounted controller.
ATA Part Number: 86220
📡 Wireless Wall-Mounted Control
The WTX-6 communicates wirelessly with the compatible ATA opener or receiver.
This eliminates the need to run a control cable from the garage door or gate operator to the wall controller.
It is particularly useful for:
- Existing garage door installations
- Retrofit installations
- Locations where running new wiring is difficult
- Additional control points
- Garages with finished walls
- Gate control from inside a building
Once programmed into the compatible receiver, pressing the selected button sends a wireless command in the same way as a compatible handheld transmitter.
🔘 Four Programmable Buttons
The ATA WTX-6 features four buttons.
Each button can be assigned to a compatible function or operator, allowing the wall controller to be configured according to the installation.
Potential configurations include:
- Garage Door 1
- Garage Door 2
- Automatic Gate
- Compatible auxiliary function
The available functions depend on the connected ATA opener or receiver.
🏠 Control Multiple Doors
The four-button layout makes the WTX-6 particularly useful for properties with more than one automatic door or gate.
For example, a single WTX-6 could be programmed to operate compatible:
- Double garages
- Multiple garage doors
- Garage door and driveway gate combinations
- Multiple gates
- Separate compatible ATA receivers
This can reduce the need for multiple individual wall controls.
🔐 TrioCode 128 Technology
The WTX-6 uses ATA TrioCode 128 wireless technology.
TrioCode 128 is ATA’s secure transmitter technology used across compatible garage door and gate automation products.
This makes the WTX-6 compatible with a wide range of ATA operators and receivers using the corresponding TrioCode system.
🎮 Wall-Mounted Alternative to a Remote
The WTX-6 essentially provides compatible remote-control functionality in a dedicated wall-mounted format.
Instead of searching for a handheld remote when entering or leaving the garage, the controller can remain conveniently positioned on the wall.
This makes it particularly useful near:
- Internal garage access doors
- Garage entrances
- Workshop entrances
- House-to-garage doors
- Gate control locations
- Building exits
🔌 No Control Wiring Required
Because the WTX-6 is wireless and battery powered, no dedicated control wiring is required between the controller and the opener.
This makes installation considerably simpler than a traditional hardwired wall switch.
There is generally no need to:
- Run control cable through walls
- Access the opener control terminals
- Install conduit between the switch and opener
- Modify existing wall wiring
The wall controller simply needs to be mounted in a suitable location and programmed into the compatible ATA receiver.
🔋 Battery Powered
The ATA WTX-6 is battery powered, allowing completely wireless installation.
A battery is supplied with the controller.
The battery can be replaced when required without replacing the complete wall controller.
🚪 Sectional Garage Door Applications
The WTX-6 is compatible with selected ATA sectional garage door openers using TrioCode technology.
Known compatible models include:
- ATA GDO-7v3
- ATA GDO-9v2
- ATA GDO-9v3
- ATA GDO-11v1
- Other compatible ATA TrioCode receivers and operators
This makes the WTX-6 suitable as an additional internal wall control for many ATA sectional door installations.
🌀 Roller Door Applications
The WTX-6 is also compatible with selected ATA roller door openers.
Known compatible models include:
- ATA GDO-6v3
- ATA GDO-6v4
- ATA GDO-8v3
- ATA GDO-10v2
- ATA GDO-10v3
- Other compatible ATA TrioCode receivers and operators
The wireless design is particularly useful when adding an additional wall controller to an existing roller door installation.
🚧 Automatic Gate Applications
The WTX-6 can also operate compatible ATA automatic gate systems using TrioCode technology.
Known compatible gate operators include:
- ATA SGO-1v3
- ATA SGO-1v4
- ATA NES-24v2
- ATA NES-24v3
- Other compatible ATA TrioCode receivers and operators
This allows the WTX-6 to be installed inside a garage, house, office or other convenient location to operate a compatible driveway gate.
🏡 Garage Door & Gate Combination
Where a property has both an ATA garage door opener and compatible ATA gate automation, the four-button WTX-6 provides a convenient central control point.
For example:
- Button 1 – Garage Door
- Button 2 – Driveway Gate
- Button 3 – Second Garage Door
- Button 4 – Additional Compatible Function
The exact button programming depends on the connected operators and receivers.
🔄 Replacement for Earlier Wall Controls
The WTX-6 is the newer ATA wireless wall controller using TrioCode 128 technology.
It can provide a replacement or upgrade option for compatible installations previously using an earlier ATA wireless wall control, provided the existing opener or receiver uses compatible TrioCode technology.
Always confirm receiver compatibility before replacing an older wall controller.
🛠️ Easy Retrofit Accessory
The wireless design makes the WTX-6 particularly suitable for retrofit applications.
An additional control point can be added without needing to run a new cable back to the garage door or gate operator.
This is useful where:
- The garage has already been finished
- Walls are lined
- The opener is difficult to cable to
- An additional control location is required
- A hardwired switch was not installed originally
🏢 Residential & Light Commercial Applications
The WTX-6 can be used anywhere a compatible ATA TrioCode receiver is installed.
Applications can include:
- Residential garages
- Residential driveway gates
- Apartment garages
- Workshops
- Sheds
- Small commercial properties
- Storage facilities
- Shared access areas
⚪ Clean White Wall-Mounted Design
The WTX-6 features a clean white housing designed for permanent wall mounting.
Its dedicated wall-controller design provides a neater installation than permanently attaching a standard handheld remote to the wall.
📦 What’s Included
The ATA WTX-6 is supplied as a complete wireless wall control.
The package includes:
- 1 × Genuine ATA WTX-6 Wireless Wall Controller
- 1 × Battery
Programming requirements depend on the compatible ATA operator or receiver being used.
⭐ Key Features
- Genuine ATA wireless wall controller
- Model WTX-6
- ATA part number 86220
- Four programmable buttons
- TrioCode 128 technology
- Wireless operation
- Battery powered
- No control cable required
- Wall-mounted design
- Suitable for compatible garage door openers
- Suitable for compatible roller door openers
- Suitable for compatible sectional door openers
- Suitable for compatible automatic gate operators
- Can control multiple compatible operators
- Ideal additional wall control
- Ideal for retrofit installations
- Compatible with the same TrioCode product family as the PTX-5v2
- Clean white housing
- Battery included
🔧 Specifications
- Manufacturer: Automatic Technology Australia
- Brand: ATA
- Model: WTX-6
- Product Type: Wireless Wall Controller / Transmitter
- ATA Part Number: 86220
- Number of Buttons: 4
- Wireless Technology: TrioCode 128
- Installation Type: Wall Mounted
- Connection to Operator: Wireless
- Battery Powered: Yes
- Battery Included: Yes
- Colour: White
🔗 Compatibility
The ATA WTX-6 is compatible with selected ATA TrioCode garage door and gate automation products.
Roller Door Openers
- GDO-6v3
- GDO-6v4
- GDO-8v3
- GDO-10v2
- GDO-10v3
Sectional Door Openers
- GDO-7v3
- GDO-9v2
- GDO-9v3
- GDO-11v1
Swing Gate Operators
- SGO-1v3
- SGO-1v4
Sliding Gate Operators
- NES-24v2
- NES-24v3
The WTX-6 is also compatible with other suitable ATA TrioCode receivers and operators.
⚠️ Please Note
The ATA WTX-6 is a wireless wall-mounted transmitter and requires a compatible ATA TrioCode receiver or operator.
It is not a hardwired wall switch.
The four buttons can be programmed according to the functions supported by the connected ATA opener or receiver.
Compatibility should be confirmed before ordering, particularly when replacing an older ATA wall controller or transmitter.
A battery is included.
Programming procedures vary depending on the garage door opener, gate operator or receiver being used.
Always follow the programming instructions for the connected ATA automation equipment.
