Description
The e-Loop e-Trans 200 V4.0 is an advanced dual-channel wireless transceiver and access control interface designed for medium-to-large automatic gate, boom gate, door and access control installations.
Offering substantially greater system management capability than the smaller e-Trans models, the e-Trans 200 supports up to 200 compatible remote controls, 4 e-Loop vehicle detectors, 4 wireless keypads and 4 entry buttons.
An integrated LCD interface provides straightforward programming, device management and system diagnostics directly from the transceiver, while two independent relay outputs, Sequence Mode, RS-485 capability and advanced e-Loop configuration provide the flexibility required for more complex residential, commercial and industrial access control systems.
📡 Advanced e-Loop Transceiver
The e-Trans 200 provides the central wireless interface between compatible e-Loop devices and the connected gate, door or access control system.
Compatible wireless devices can communicate with the e-Trans 200, which then operates the appropriate relay output according to its programmed configuration.
The system can incorporate:
- e-Loop vehicle detectors
- e-TX remote controls
- Compatible wireless keypads
- Compatible entry buttons
- Automatic gates
- Boom gates
- Automatic barriers
- Automatic doors
- Access control systems
This allows multiple access control functions to be managed through one central transceiver.
🏢 Designed for Medium-to-Large Systems
The e-Trans 200 is designed for installations requiring considerably more control and device management than a basic residential receiver.
Typical applications include:
- Apartment complexes
- Commercial properties
- Business parks
- Industrial facilities
- Commercial car parks
- Gated communities
- Shared residential entrances
- Warehouses
- Staff access systems
- Boom gate installations
- Multi-user automatic gates
- Multi-device access control systems
Its larger device capacity makes it particularly useful where a significant number of users need to be managed individually.
🎮 Stores up to 200 Remotes
The e-Trans 200 can store up to 200 compatible remote controls.
Each programmed remote can be assigned an individual unit number ID.
This provides significantly improved management compared with a basic receiver where individual transmitters may be difficult to identify.
Remote identification is particularly useful for:
- Apartment complexes
- Commercial properties
- Staff access systems
- Shared gates
- Gated communities
- Multi-tenant properties
If a particular remote is lost or needs to be removed, the individual device can be identified and deleted without clearing every transmitter from the system.
🚗 Supports up to 4 e-Loops
The e-Trans 200 can store and communicate with up to 4 compatible e-Loop vehicle detectors.
This allows multiple vehicle detection points to be incorporated into the same access control installation.
Applications can include:
- Automatic vehicle exit
- Vehicle presence detection
- Multiple driveway detection points
- Entry detection
- Exit detection
- Gate hold-open detection
- Commercial vehicle detection
- Parking applications
Each e-Loop can be configured according to the requirements of the installation.
🔢 Supports up to 4 Keypads
The e-Trans 200 can also store up to 4 compatible wireless keypads.
This allows keypad access to be incorporated into the same system used for vehicle detection and remote controls.
Multiple keypads can be useful for:
- Vehicle entrances
- Pedestrian entrances
- Separate entry points
- Commercial properties
- Shared access systems
- Apartment complexes
Each keypad can be allocated according to the required relay and access function.
🔘 Supports up to 4 Entry Buttons
The e-Trans 200 can store up to 4 compatible wireless entry buttons.
This provides additional flexibility when creating a complete wireless access control system.
Entry buttons can be used where a simple wireless activation point is required without installing additional control cabling.
2️⃣ Dual Relay Outputs
The e-Trans 200 incorporates two independent relay outputs.
Each relay provides:
- Common connection
- Normally Open connection
- 1-amp contact rating
The two relay channels can be allocated independently according to the requirements of the connected gate or access control system.
Potential applications include:
- Main gate opening
- Pedestrian opening
- Separate entry and exit functions
- Gate and pedestrian door control
- Two independent gates
- Gate and boom barrier control
- Separate access functions
The actual operation depends on the connected equipment and e-Trans programming.
🔄 Pulse, Latch & Hold Relay Modes
The e-Trans 200 provides multiple relay operating modes.
Available relay functions include:
- Pulse
- Latch
- Hold
Pulse Mode is ideal for conventional gate activation where a momentary signal is required.
Latch and Hold modes provide additional control options for applications where the output needs to remain active according to the programmed system logic.
This makes the e-Trans 200 considerably more flexible than a simple gate receiver.
🖥️ Integrated LCD Interface
One of the major advantages of the e-Trans 200 is its integrated LCD programming interface.
The display provides clear access to programming menus and system information directly from the transceiver.
This makes it easier to:
- Add devices
- Delete devices
- Allocate devices
- Assign relay outputs
- Set device IDs
- Configure e-Loops
- Adjust relay functions
- Access diagnostic information
- Configure radio settings
- Troubleshoot the system
The LCD interface is particularly useful on larger installations where many devices need to be managed.
🎛️ Simple Rotary Menu Navigation
The e-Trans 200 uses a rotary control and push-button interface to navigate through the programming menus.
This allows installers to move through configuration options directly from the transceiver without complicated button sequences.
The menu system provides access to major functions including:
- Coded devices
- Relay functions
- e-Loop configuration
- Radio settings
- Diagnostic functions
This provides a straightforward method of commissioning and maintaining larger systems.
🆔 Individual Device Identification
Compatible remote controls can be assigned individual unit IDs.
This makes it possible to identify a particular transmitter within the system rather than treating every remote as an anonymous device.
Individual identification can simplify management for:
- Apartment numbers
- Staff members
- Tenants
- Individual properties
- Allocated parking users
- Commercial access holders
This can make future transmitter replacement and deletion considerably easier.
🗑️ Individual Device Deletion
The e-Trans 200 allows individual programmed devices to be deleted.
This means a lost or returned remote does not require the complete receiver memory to be erased.
Individual devices that can be managed include compatible:
- Remote controls
- e-Loops
- Keypads
- Entry buttons
The system also provides options for deleting all devices within a selected category when required.
🔒 Device Lock-Out Function
The e-Trans 200 incorporates a device lock-out function.
Selected coded devices can be locked out without permanently deleting them from the receiver.
This can be particularly useful for:
- Temporarily disabling a remote
- Restricting a tenant’s access
- Suspending a staff transmitter
- Managing temporary users
- Preventing unauthorised gate operation
The device can subsequently be restored according to the system configuration.
🔄 Sequence Mode
The e-Trans 200 provides Sequence Mode capability for more advanced gate automation applications.
Sequence Mode allows compatible devices and relay outputs to operate according to a programmed control sequence.
This provides additional flexibility where several access control or vehicle detection functions need to interact.
Sequence Mode can be particularly useful for:
- Multi-gate installations
- Entry and exit systems
- Commercial access control
- Sequential gate operation
- Advanced vehicle detection applications
🧲 Advanced e-Loop Configuration
The e-Trans 200 provides advanced configuration options for compatible e-Loop vehicle detectors.
Compatible e-Loops can be connected directly to the transceiver during configuration to allow detector settings to be adjusted.
This provides installers with considerably more control over vehicle detection behaviour than a basic receiver.
🔍 e-Loop Diagnostics
The e-Trans 200 incorporates diagnostic functionality specifically for compatible e-Loop detectors.
Diagnostic information can assist with monitoring and troubleshooting vehicle detection performance.
This can be particularly useful when investigating:
- Vehicle detection issues
- Magnetic detection levels
- Radar behaviour
- Communication problems
- Detector configuration
- Release timing
- Site interference
For larger commercial installations, having diagnostic functionality available directly through the transceiver can significantly reduce troubleshooting time.
🧲 Magnetic Detection Adjustment
Compatible e-Loop settings can be adjusted through the advanced e-Trans 200 interface.
This allows the vehicle detection system to be optimised according to the installation environment and type of vehicles being detected.
Advanced adjustment can be particularly useful where:
- Background magnetic interference is present
- Vehicles are difficult to detect
- Detector release timing requires adjustment
- Trailers are regularly used
- Site conditions require specialised configuration
📡 Advanced Radar Configuration
Where compatible e-Loops incorporate radar vehicle detection, the e-Trans 200 can provide access to advanced radar configuration.
This allows installers to fine-tune the detection behaviour for the particular application.
Advanced configuration should only be adjusted where required, as detector settings influence vehicle detection and release behaviour.
⚡ 10–36V AC/DC Power
The e-Trans 200 operates from a wide 10–36V AC/DC power supply.
This makes it compatible with a broad range of automatic gate and access control systems.
Unlike the smaller DC-only e-Trans models, the e-Trans 200 can operate directly from either a suitable AC or DC accessory supply within its specified voltage range.
This simplifies installation with gate operators that provide AC accessory power.
🔋 Low-Drain Radio Sleep Mode
The e-Trans 200 provides different radio operating states to help manage power consumption.
Typical standby current is approximately:
- Radio Awake: 16mA
- Radio Sleep: 4.5mA
The low-drain sleep state can be particularly useful for:
- Solar-powered gates
- Battery-backed gate systems
- Remote installations
- Applications where accessory power consumption needs to be minimised
📻 433.39MHz Wireless Operation
The e-Trans 200 communicates with compatible wireless devices using the 433.39MHz frequency.
Compatible e-Loops, remotes and other supported access devices communicate wirelessly with the transceiver.
This reduces the amount of control cabling required throughout the access control installation.
🔌 1-Amp Relay Contacts
Both relay outputs provide a 1-amp contact rating.
Each relay includes Common and Normally Open connections for integration with compatible automation equipment.
The relay contacts are intended to provide control signals to the connected gate, door or access control controller.
🔗 RS-485 Capability
The e-Trans 200 V4 platform incorporates RS-485 capability.
RS-485 provides an additional communications interface for compatible equipment and allows the e-Trans 200 to form part of more advanced control and integration systems.
This makes the e-Trans 200 particularly attractive for commercial installations requiring greater communication and system expansion capability.
📡 External Antenna Options
The e-Trans 200 can be used with compatible external antennas where additional wireless performance is required.
An external antenna can be particularly useful where:
- The transceiver is installed inside a metal enclosure
- The e-Loops are positioned further away
- Buildings obstruct the wireless signal
- The transceiver is located inside a plant room
- Additional wireless range is required
- Radio reception at the controller is poor
Correct antenna positioning can significantly improve wireless performance.
🚪 Automatic Free-Exit Applications
The e-Trans 200 can provide the interface between compatible e-Loops and an automatic gate controller for vehicle free-exit applications.
A typical sequence is:
- The vehicle approaches the e-Loop.
- The e-Loop detects the vehicle.
- A wireless detection command is transmitted.
- The e-Trans 200 receives the command.
- The programmed relay activates.
- The gate controller receives the opening command.
- The gate opens automatically.
This allows vehicles to leave without requiring the driver to use a remote control or other access credential.
🅿️ Vehicle Presence Applications
When paired with compatible Presence Mode e-Loops, the e-Trans 200 can also form part of a vehicle presence detection system.
Applications can include:
- Holding an automatic gate open
- Holding a boom gate open
- Vehicle presence monitoring
- Commercial vehicle detection
- Parking applications
- Access control systems
The exact operation depends on the e-Loop configuration and connected controller.
Vehicle presence detection should not be treated as a replacement for required personal safety devices.
🚦 Multi-Device Access Control
The e-Trans 200 is particularly useful where several different types of access devices need to operate the same system.
One transceiver can manage compatible:
- Vehicle detectors
- Remote controls
- Keypads
- Entry buttons
Combined with two independent relay channels, this allows a sophisticated access control system to be created without installing separate receivers for every wireless device type.
🏘️ Ideal for Apartment & Shared Access Systems
The ability to store up to 200 remotes makes the e-Trans 200 particularly useful for shared residential access.
Applications can include:
- Apartment buildings
- Townhouse developments
- Gated communities
- Shared residential driveways
- Multi-tenant properties
Individual remote IDs and device management simplify administration when residents change or remotes are lost.
🏢 Commercial & Industrial Applications
The advanced functionality of the e-Trans 200 makes it suitable for demanding commercial installations.
Typical applications include:
- Business parks
- Commercial car parks
- Industrial sites
- Warehouses
- Distribution facilities
- Staff vehicle entrances
- Commercial boom gates
- Automatic barriers
- Secured vehicle entrances
- Multi-user gate systems
🔧 Compatible with Multiple Gate Automation Brands
The e-Trans 200 interfaces with gate and access control systems through conventional relay outputs.
This allows it to be integrated with many different automation brands where suitable control inputs are available.
Potential applications include compatible:
- FAAC gate operators
- ATA gate operators
- B&D gate operators
- Centsys gate operators
- Sliding gate operators
- Swing gate operators
- Boom gates
- Automatic barriers
- Automatic doors
- Access control systems
The exact connection method depends on the connected control board and required function.
📈 Step Up from the e-Trans 100
The e-Trans 200 is designed for installations requiring greater user capacity and more advanced system management than the e-Trans 100.
Key capabilities include:
- Up to 200 remote controls
- Up to 4 e-Loops
- Up to 4 keypads
- Up to 4 entry buttons
- 2 independent relay outputs
- LCD programming interface
- Individual device IDs
- Individual device deletion
- Device lock-out
- Sequence Mode
- Advanced e-Loop diagnostics
- Advanced programmability
- RS-485 capability
- AC/DC power compatibility
This makes the e-Trans 200 particularly suitable for medium-to-large residential, commercial and industrial access control systems.
⭐ Key Features
- e-Loop e-Trans 200 V4.0
- Model ETRANS-200-V4.0
- Advanced wireless access control transceiver
- Designed for medium-to-large systems
- Integrated LCD interface
- Easy menu-based programming
- Supports up to 200 compatible remotes
- Supports up to 4 e-Loops
- Supports up to 4 compatible keypads
- Supports up to 4 entry buttons
- Individual remote ID allocation
- Individual device deletion
- Device lock-out functionality
- 2 independent relay channels
- 1-amp relay contact rating
- Common and Normally Open relay contacts
- Pulse relay mode
- Latch relay mode
- Hold relay mode
- Sequence Mode capability
- Advanced programmability
- Advanced diagnostics
- Direct e-Loop configuration capability
- e-Loop diagnostic functions
- RS-485 capability
- 10–36V AC/DC power supply
- Radio Awake current approximately 16mA
- Radio Sleep current approximately 4.5mA
- 433.39MHz wireless operation
- Suitable for vehicle free-exit systems
- Suitable for vehicle presence applications
- Suitable for automatic gates
- Suitable for boom gates
- Suitable for automatic barriers
- Suitable for automatic doors
- Suitable for access control systems
- Ideal for apartment and shared access systems
- Ideal for commercial installations
🔧 Specifications
- Manufacturer: Microtech Designs / e-Loop
- Product: e-Trans 200
- Model: ETRANS-200-V4.0
- Version: V4.0
- Product Type: Advanced Wireless Access Control Transceiver
- Recommended Application: Medium-to-Large Systems
- Remote Capacity: Up to 200
- e-Loop Capacity: Up to 4
- Keypad Capacity: Up to 4
- Entry Button Capacity: Up to 4
- Output Channels: 2
- Relay Contact Rating: 1 Amp
- Relay Connections: Common & Normally Open
- Relay Modes: Pulse, Latch & Hold
- Display: Integrated LCD
- Device ID Allocation: Yes
- Individual Device Deletion: Yes
- Device Lock-Out: Yes
- Sequence Mode: Yes
- Advanced Programmability: Yes
- Advanced Diagnostics: Yes
- Direct e-Loop Configuration: Yes
- RS-485 Capability: Yes
- Supply Voltage: 10–36V AC/DC
- Radio Awake Current: Approximately 16mA
- Radio Sleep Current: Approximately 4.5mA
- Operating Frequency: 433.39MHz
- Wireless Vehicle Detection Compatible: Yes
- Remote Control Compatible: Yes
- Suitable for Automatic Gates: Yes
- Suitable for Automatic Doors: Yes
- Suitable for Access Control: Yes
🔗 Compatibility
The e-Trans 200 V4.0 is designed for integration with compatible devices within the e-Loop access control ecosystem.
The transceiver supports up to:
- 200 compatible remote controls
- 4 compatible e-Loops
- 4 compatible wireless keypads
- 4 compatible entry buttons
Its two relay outputs allow integration with compatible:
- Sliding gate operators
- Swing gate operators
- Boom gates
- Automatic barriers
- Automatic doors
- Residential gate automation
- Commercial gate automation
- Shared access systems
- Vehicle free-exit systems
- Vehicle presence detection
- Access control systems
The connected automation controller must provide suitable control inputs for the required functions.
⚠️ Please Note
The e-Trans 200 is a transceiver and access control interface and does not detect vehicles by itself.
A compatible e-Loop vehicle detector is required when the system is being used for vehicle detection.
The e-Trans 200 supports a maximum of 200 compatible remotes, 4 e-Loops, 4 keypads and 4 entry buttons.
The unit provides 2 relay output channels with 1-amp contact ratings.
The e-Trans 200 accepts 10–36V AC/DC power. Always confirm the available accessory voltage from the connected gate or access control controller before installation.
Wireless performance depends on the paired devices, transceiver location, surrounding structures, interference and site conditions.
Where the transceiver is installed inside a metal control cabinet, an appropriate external antenna may be required to maintain reliable wireless communication.
Advanced e-Loop configuration and diagnostic settings should only be adjusted according to the requirements of the installation.
Vehicle presence detection should not be relied upon as the sole personal safety system for an automatic gate or barrier.
Installation and commissioning should be completed in accordance with the manufacturer’s instructions and the requirements of the connected automation and access control system.
