Description

The e-Loop Commercial V4 is a heavy-duty wireless vehicle detection system designed for high-traffic commercial, industrial and multi-user access control applications.

Designed as an alternative to traditional wired inductive ground loops, the e-Loop Commercial detects vehicles without requiring a conventional loop cable to be saw-cut into the driveway. The surface-mounted detector communicates wirelessly with a compatible e-Trans receiver connected to the gate operator, boom gate or access control system.

Built on the latest e-Loop V4 platform, the Commercial model combines advanced vehicle sensing, secure encrypted wireless communication, smartphone-based configuration, automatic calibration, long battery life and a heavy-duty 15-tonne static load capacity.

It is an ideal solution for commercial entrances where reliable vehicle detection is required without the installation time and disruption associated with conventional inductive loops.

🚗 Commercial Wireless Vehicle Detection

The e-Loop Commercial V4 detects vehicles entering its detection area and wirelessly communicates with a compatible e-Trans receiver.

The receiver interfaces with the gate operator, boom gate or access control system and provides the required activation or presence signal.

This allows the e-Loop Commercial to perform vehicle detection functions traditionally handled by a wired inductive ground loop without requiring a large loop cable to be installed beneath the driveway.

Typical applications include:

Commercial automatic gates
Industrial access points
Business parks
Shared access roads
Warehouses
Distribution centres
Factory entrances
Commercial car parks
Loading areas
Boom gates
Automatic barriers
High-use vehicle entrances

🏢 Designed for High-Traffic Commercial Applications

The Commercial V4 has been specifically developed for busy access points where dependable vehicle detection is required throughout the day.

Unlike lighter-duty residential vehicle detectors, the Commercial model is designed around the requirements of high-use access control installations.

It is particularly suited to:

Commercial properties
Industrial facilities
Business parks
Shared commercial driveways
Warehouses
Logistics facilities
Staff car parks
Delivery entrances
Loading facilities
Secured vehicle entrances

Its combination of robust construction, long battery life and wireless installation makes it particularly useful for commercial sites where downtime and maintenance need to be minimised.

🛠️ No Traditional Inductive Loop Required

One of the major advantages of the e-Loop Commercial is that it eliminates the need for a conventional wired inductive loop.

Traditional vehicle detection loops normally require a large rectangular loop to be saw-cut into the driveway surface, with the loop cable then wired back to a detector or gate controller.

The e-Loop Commercial V4 eliminates this conventional loop installation.

There is no requirement to:

Saw-cut a large induction loop into the driveway
Install conventional loop wire
Run loop cabling back to the gate controller
Trench across the driveway
Repair extensive saw cuts after installation

This can substantially reduce installation time and disruption, particularly on completed commercial driveways and existing access control installations.

⚡ Fast Surface-Mount Installation

The e-Loop Commercial V4 is designed for surface mounting directly within the vehicle path.

Installation is considerably simpler than installing a traditional inductive ground loop.

The basic installation process involves:

Selecting the correct detector location
Pairing the e-Loop with the compatible e-Trans receiver
Securing the detector to a suitable surface
Configuring the required operating mode
Calibrating the vehicle detector
Testing the complete system

This makes the e-Loop particularly attractive for retrofit projects where vehicle detection needs to be added to an existing automatic gate or barrier.

🧲 Advanced Vehicle Detection

The e-Loop Commercial uses advanced sensing technology to detect vehicles within the required detection area.

Rather than depending on a large buried induction loop, the compact detector monitors its local environment and identifies the presence or movement of a vehicle.

The V4 platform has been developed to provide enhanced detection performance across a wide range of automatic gate and access control applications.

🚪 Exit Mode

Exit Mode allows the e-Loop Commercial V4 to operate as an automatic vehicle exit device.

When a vehicle approaches the detector from inside the property, the e-Loop detects the vehicle and transmits an activation command to the compatible e-Trans receiver.

The receiver can then activate the dedicated opening input on the gate or barrier controller.

This allows vehicles to leave the property without requiring the driver to:

Use a remote control
Enter a PIN code
Present an access credential
Press an exit button
Contact security personnel

Exit Mode is ideal for commercial sites where entry is controlled but vehicles are permitted to leave automatically.

🅿️ Vehicle Presence Detection

Where configured for a compatible presence application, the e-Loop system can be used to maintain detection while a vehicle remains within the monitored area.

Presence detection can be particularly useful for applications such as:

Holding an automatic gate open
Holding a boom gate open
Vehicle presence monitoring
Commercial access control
Preventing closure while a vehicle remains in the detection area
Longer vehicle detection

This can provide an important additional layer of vehicle management around automatic gates and barriers.

The exact system behaviour depends on the e-Loop configuration, compatible receiver and the inputs available on the connected automation controller.

📱 Smartphone Configuration

The e-Loop V4 platform introduces smartphone-based configuration and commissioning.

Compatible V4 devices can be configured and managed directly through the e-Loop smartphone application.

This provides installers with a convenient interface for system setup and diagnostics without requiring complicated manual programming procedures at the detector.

Smartphone-based setup can assist with:

Initial commissioning
Detector configuration
System diagnostics
Installation setup
Device management
Firmware management

This is particularly useful for commercial installations where efficient commissioning and troubleshooting can reduce service time.

🔄 Over-the-Air Firmware Updates

The V4 platform introduces support for over-the-air firmware updates.

Compatible firmware enhancements can be deployed without physically replacing the detector or connecting specialised programming equipment.

This allows the V4 platform to receive future software improvements and helps keep the vehicle detection system operating with the latest available enhancements.

🔐 128-Bit Encrypted Communication

The e-Loop V4 platform uses 128-bit encrypted wireless communication.

This provides secure communication between compatible components within the e-Loop system.

The V4 platform also incorporates replay attack protection, adding another layer of security to the wireless communication system.

These features are particularly valuable in commercial and industrial access control environments where wireless vehicle detection forms part of the property’s overall security and automation system.

📡 Wireless Communication

The e-Loop communicates wirelessly with a compatible e-Trans receiver located at the gate operator, barrier or access control equipment.

This eliminates the requirement to run a detection signal cable from the roadway sensor back to the automation controller.

Wireless communication provides greater flexibility when installing vehicle detection at:

Wide commercial driveways
Existing automatic gates
Boom gate entrances
Finished concrete areas
Industrial facilities
Shared access roads
Locations where trenching is difficult

Actual wireless performance depends on installation conditions, receiver positioning, structures, interference and other environmental factors.

🔋 Long Battery Life

The e-Loop Commercial V4 is designed for long-term battery-powered operation.

The V4 platform can provide up to 10 years of battery life when operating in Exit Mode, helping minimise maintenance requirements at busy commercial sites.

Actual battery life will depend on factors including:

Operating mode
Number of daily activations
Detection duration
Environmental conditions
System configuration
Wireless communication conditions

Battery-powered operation means no electrical power cable needs to be installed to the roadway detector.

💪 Heavy-Duty 15-Tonne Static Load Capacity

The e-Loop Commercial V4 is specifically designed for demanding commercial vehicle environments.

The current Commercial V4 model provides a static load capacity of up to 15 tonnes.

This robust construction makes it suitable for high-use commercial access points where the detector may regularly be driven over by vehicles.

Typical applications can include areas used by:

Passenger vehicles
Commercial vans
Service vehicles
Delivery vehicles
Utility vehicles
Other compatible commercial traffic

Correct installation remains essential to ensure the detector is properly supported and protected.

🌧️ Designed for Outdoor Installation

The e-Loop Commercial is designed specifically for external vehicle detection applications.

Its rugged construction allows the detector to be installed directly within commercial driveway and access environments.

Correct installation is important to ensure reliable long-term operation.

The detector should be installed on a suitable surface and positioned according to the manufacturer’s installation requirements.

🔄 Automatic Calibration

The e-Loop V4 platform incorporates automatic calibration to simplify installation and commissioning.

Once positioned correctly, the detector can establish its normal operating environment and configure its vehicle detection system accordingly.

This reduces the amount of manual detector adjustment normally associated with conventional vehicle detection equipment.

If the detector is relocated after installation, the system should be recalibrated for the new environment.

🚧 Excellent for Retrofit Installations

The wireless design makes the e-Loop Commercial particularly useful when adding vehicle detection to an existing automatic gate or access control system.

Retrofitting a traditional inductive loop can require:

Saw cutting the existing driveway
Installing loop wire
Running cable back to the gate controller
Closing the driveway during installation
Repairing the finished driveway surface

The e-Loop provides a significantly less disruptive alternative.

This makes it particularly suitable for existing:

Commercial automatic gates
Industrial gates
Boom gates
Car park barriers
Business park entrances
Warehouse access points
Shared commercial driveways

🚚 Suitable for Busy Vehicle Entrances

The Commercial V4 has been developed specifically for locations where vehicle detection is required repeatedly throughout the day.

Typical sites can include:

Warehouses
Factories
Business parks
Commercial buildings
Industrial estates
Distribution facilities
Commercial car parks
Staff entrances
Delivery entrances
Shared access roads

The combination of robust construction and long battery life helps reduce ongoing maintenance requirements in these higher-use applications.

🚦 Gate & Boom Gate Applications

The e-Loop Commercial can be integrated with compatible automatic gate and barrier systems through an appropriate e-Trans receiver.

Applications can include:

Sliding gate operators
Swing gate operators
Boom gates
Automatic barriers
Commercial access control systems
Vehicle free-exit systems
Vehicle presence systems

The e-Trans receiver provides the interface between the wireless detector and the connected automation equipment.

This means the e-Loop system can be used with many different gate automation brands where the controller provides a suitable control input.

🧰 Reduced Installation & Maintenance Requirements

The e-Loop eliminates the large buried wire loop used by conventional inductive detection systems.

This removes one of the common potential failure points associated with traditional ground loops.

Conventional loops can potentially be affected by:

Ground movement
Damaged loop wire
Deteriorating saw cuts
Driveway resurfacing
Construction work
Cable damage

With the e-Loop Commercial, the detector remains accessible for inspection, servicing and replacement.

The V4 platform’s extended battery life further reduces routine maintenance requirements.

🏭 Commercial & Industrial Applications

The e-Loop Commercial V4 is an excellent solution for high-use vehicle detection applications including:

Commercial driveway gates
Industrial sliding gates
Industrial swing gates
Boom gates
Car park barriers
Factory entrances
Warehouse entrances
Loading areas
Logistics facilities
Business parks
Shared access roads
Staff car parks
Delivery entrances
Secured vehicle access points

⭐ Key Features

Commercial-grade wireless vehicle detection
Latest e-Loop V4 platform
Model ELOOC-V4.0
Designed for high-traffic commercial applications
Alternative to traditional wired inductive loops
No conventional induction loop required
No large loop saw cutting required
No loop cable back to the controller
Fast surface-mount installation
Advanced vehicle detection
Exit Mode capability
Vehicle presence applications
Automatic calibration
Smartphone-based setup
Smartphone diagnostics
Over-the-air firmware updates
128-bit encrypted wireless communication
Replay attack protection
Up to 10 years battery life in Exit Mode
Battery-powered detector
15-tonne static load capacity
Designed for high-use vehicle access points
Suitable for automatic gates
Suitable for boom gates
Suitable for automatic barriers
Suitable for commercial access control
Ideal for retrofit installations
Suitable for warehouses and industrial facilities
Suitable for business parks and shared access roads
Reduced installation disruption
Reduced maintenance requirements

🔧 Specifications

Manufacturer: AES Global
Product: e-Loop Commercial
Model: ELOOC-V4.0
Version: V4.0
Product Type: Wireless Vehicle Detector
Application: Commercial / Industrial Vehicle Detection
Installation: Surface Mount
Communication: Wireless
Security: 128-Bit Encryption
Replay Attack Protection: Yes
Smartphone Configuration: Yes
Smartphone Diagnostics: Yes
Over-the-Air Firmware Updates: Yes
Automatic Calibration: Yes
Exit Detection: Yes
Presence Application: Yes, subject to configuration
Sensor Power: Battery
Maximum Battery Life: Up to 10 Years in Exit Mode
Maximum Static Load Capacity: 15 Tonnes
Compatible Receiver: e-Trans V4 Series
Gate Operator Connection: Via Compatible e-Trans Receiver
Suitable for High-Traffic Applications: Yes

🔗 Compatibility

The e-Loop Commercial V4 can be integrated with compatible automatic gate, boom gate, barrier and access control systems through an appropriate e-Trans receiver.

Typical compatible applications include:

Sliding gate operators
Swing gate operators
Boom gates
Automatic barriers
Commercial access control systems
Industrial gate automation
Vehicle free-exit systems
Vehicle presence detection

Compatibility primarily depends on the connected automation controller having the appropriate input for the function being used.

For an automatic free-exit application, the gate or door controller should have a dedicated opening input and be configured with the appropriate automatic closing function.

⚠️ Please Note

The e-Loop Commercial V4 requires a compatible e-Trans receiver to interface with the gate operator, boom gate or access control system.

Confirm whether the receiver is included with the selected product or needs to be purchased separately.

The stated maximum battery life is dependent on operating mode, daily activations, detection duration, environmental conditions and system configuration.

The 15-tonne rating refers to the static load capacity of the Commercial V4 detector and does not remove the requirement for correct installation on a suitable surface.

Wireless performance can vary according to receiver location, surrounding structures, electrical interference and site conditions.

The correct detector location, operating mode and control connection should be selected according to the requirements of the individual automatic gate, barrier or access control installation.

Installation and commissioning should be carried out in accordance with the manufacturer’s instructions and the safety requirements of the connected automation system.

e-Loop Commercial (ELOOC-V4.0)