Description
AAC 413/415 Rear Long Pin Group – 718366
Genuine FAAC replacement rear long pin group for compatible FAAC 413 and 415 electromechanical swing gate operators.
The 718366 forms part of the rear mounting assembly, providing the pivot connection between the operator and its rear mounting fork/bracket.
Ideal for replacing a worn, damaged, bent or missing rear mounting pin during the repair or refurbishment of a FAAC 413 or 415 operator.
FAAC Part Number: 718366
🔩 Rear Operator Mounting Pin
The rear long pin is used at the rear mounting point of the swing gate operator.
It passes through the applicable rear mounting components to provide a secure pivoting connection between the operator and the fixed mounting arrangement on the gate post or pillar.
🔄 Allows the Operator to Pivot
As a linear swing gate operator extends and retracts, its angle relative to the gate post changes throughout the opening and closing cycle.
The rear mounting pin allows the operator to pivot at this mounting point while remaining securely attached to the rear bracket assembly.
⚙️ Suits FAAC 413 & 415
The 718366 Rear Long Pin Group is used across compatible:
- FAAC 413
- FAAC 415
This makes it a shared mounting component between the two operator families.
🔧 Replacement Spare Part
Replacement may be required where the existing rear pin has:
- Become worn
- Developed excessive play
- Become bent or distorted
- Sustained physical damage
- Developed wear around the pivot point
- Been damaged during operator removal
- Been lost during servicing
If significant wear is present on the pin, the corresponding rear fork and mounting components should also be inspected.
🏗️ Important Rear Mounting Component
The rear mounting point carries operating loads as the operator opens and closes the gate.
The correct pin provides the required pivot point while maintaining a secure connection between the operator and its rear mounting assembly.
Excessive wear within this connection can result in unwanted movement or play in the operator.
🧰 Genuine FAAC Spare Part
Part number 718366 is a genuine FAAC replacement rear long pin group for compatible 413 and 415 operators.
Using the correct replacement component maintains the original rear mounting and pivot arrangement of the operator.
📦 What’s Included
Supplied as:
- 1 × FAAC 413/415 Rear Long Pin Group
FAAC Part Number: 718366
Rear mounting brackets, forks and other operator components are separate unless specifically stated as included.
Key Features
- Genuine FAAC spare part
- FAAC Part Number: 718366
- Rear long pin group
- Rear operator mounting component
- Provides the rear pivot connection
- Suits compatible FAAC 413 operators
- Suits compatible FAAC 415 operators
- Replacement for worn, bent or damaged mounting pins
- Suitable for operator repairs and refurbishment
Specifications
- Manufacturer: FAAC
- Brand: FAAC
- Product: 413/415 Rear Long Pin Group
- Part Number: 718366
- Product Type: Rear Mounting / Pivot Pin
- Application: Swing Gate Automation
- Mounting Position: Rear of Operator
- Compatible Operator Families: FAAC 413 / FAAC 415
Compatibility
Compatible with applicable versions of:
- FAAC 413
- FAAC 413 24V
- FAAC 413 LS
- FAAC 415
- FAAC 415 24V
- FAAC 415 L
- FAAC 415 LS
- FAAC 415 L LS
⚠️ Please Note
This listing is for the FAAC 718366 Rear Long Pin Group.
The rear mounting fork, mounting bracket, operator and other associated mounting components are separate unless specifically stated as included.
If the existing pin has developed excessive wear, inspect the corresponding holes and pivot points in the rear mounting assembly. Replacing the pin alone may not eliminate excessive movement if the surrounding components are also worn.
Correct front and rear mounting geometry is critical to the operation of a linear swing gate operator.
If the pin has bent or suffered abnormal wear, the gate hinges, operator mounting geometry and gate movement should be checked for excessive resistance or abnormal loading.
The gate and operator should be safely supported before removing any mounting pins.
If you are unsure whether the 718366 Rear Long Pin Group suits your FAAC swing gate operator, use our compatibility checker or contact our Technical Support team on 1300 733 066.
