Description
The ATA Gear 2925 is a genuine replacement internal drive gear designed for the ATA SGO-1V4 Elite Swing Gate Operator.
This component forms part of the operator’s internal mechanical drive system and is used when repairing an SGO-1V4 Elite with a worn or damaged Gear 2925.
Product Reference: 64480
⚙️ Genuine ATA Drive Gear
The Gear 2925 is a genuine ATA replacement component manufactured for the SGO-1V4 Elite swing gate operator.
It forms part of the internal gearing responsible for transferring mechanical drive through the operator.
Using the correct replacement gear ensures the internal drive assembly retains the intended component geometry and fitment.
🚪 Designed for the SGO-1V4 Elite
This gear is specifically listed for the:
- ATA SGO-1V4 Elite Swing Gate Operator
The SGO-1V4 Elite is an articulated-arm swing gate operator, and its internal gearbox contains several individual mechanical components.
Gear 2925 is one of the serviceable components available for repair of the operator.
🔧 Replacement Internal Gear
Internal gears can eventually require replacement due to wear, damage or a mechanical failure within the operator.
Depending on the condition of the complete drive assembly, replacing the individual gear may allow the existing operator to be repaired without replacing the complete gate operator.
Before replacing the gear, the remaining internal drive components should also be inspected.
🔍 Inspect the Complete Gearbox
Where Gear 2925 has failed, it is important to determine why the failure occurred.
The technician should inspect the surrounding components for:
- Damaged gear teeth
- Excessive wear
- Binding
- Shaft damage
- Bearing or bush wear
- Contamination
- Incorrect alignment
- Damage to associated gears
- Abnormal gate loading
Replacing a damaged gear without correcting the underlying cause may result in premature failure of the replacement component.
🚧 Check the Gate Before Repair
A gearbox failure can sometimes be caused or accelerated by problems with the gate itself.
Before returning the operator to service, check that the swing gate:
- Moves freely by hand
- Does not bind through its travel
- Is correctly hinged
- Is correctly balanced
- Does not drag on the ground
- Has suitable opening and closing stops
- Is within the operator’s specified limits
The automation system should not be used to compensate for a gate that is mechanically difficult to move.
🛠️ Repair Instead of Complete Operator Replacement
The availability of individual internal components such as Gear 2925 can make it possible to repair an existing SGO-1V4 Elite rather than automatically replacing the complete operator.
This can be particularly useful where:
- The operator housing remains serviceable
- The motor remains operational
- The electronics remain operational
- The remaining gearbox components are in good condition
- The fault has been isolated to the damaged gear
The complete operator should be inspected before determining whether an individual component repair is appropriate.
🧰 Suitable for Service Technicians
Gear 2925 is primarily a service component intended for technicians repairing ATA swing gate automation equipment.
Replacement requires the operator to be opened and the internal mechanical drive assembly accessed.
Care should be taken during disassembly to ensure all associated components are correctly positioned during reassembly.
🏠 Residential Swing Gate Applications
The SGO-1V4 Elite is used in automatic swing gate installations where an articulated-arm operator is required.
Gear 2925 allows the internal drive system of compatible SGO-1V4 Elite operators to be serviced when this particular gear requires replacement.
♻️ Extend the Service Life of the Operator
Replacing individual serviceable components can extend the useful life of an existing gate operator.
Where the remainder of the SGO-1V4 Elite remains in good condition, replacing a worn Gear 2925 can form part of a cost-effective mechanical repair.
The complete operator should always be tested after reassembly.
⭐ Key Features
- Genuine ATA spare part
- Gear 2925
- Product reference 64480
- Internal operator drive gear
- Designed for ATA swing gate automation
- Specifically listed for SGO-1V4 Elite
- Replacement mechanical component
- Suitable for operator repairs
- Allows individual gearbox component replacement
- Ideal for service and maintenance applications
- Genuine replacement component for compatible operator
🔧 Specifications
- Manufacturer: Automatic Technology Australia
- Brand: ATA
- Product: Gear 2925
- Product Reference: 64480
- Product Type: Internal Drive Gear
- Application: Swing Gate Operator
- Compatible Operator: SGO-1V4 Elite
- Installation Location: Internal Operator Drive Assembly
- Replacement Component: Yes
- Quantity: 1 × Gear
🔗 Compatibility
Designed specifically for:
- ATA SGO-1V4 Elite Swing Gate Operator
Product Reference:
- 64480
Compatibility should be confirmed against the model identification of the existing gate operator before ordering.
⚠️ Please Note
This listing is for the Gear 2925 only.
Motor assemblies, shafts, additional gears, control boards, articulated arms and other operator components are not included unless specifically stated.
This component is specifically listed for the ATA SGO-1V4 Elite Swing Gate Operator.
Before replacing the gear, inspect the complete drive assembly and gate for other faults that may have contributed to the original failure.
Internal gate operator repairs should be carried out by appropriately trained and experienced personnel.
Disconnect power from the gate operator before opening or servicing the unit.
After repair, the complete gate automation system and all safety functions should be tested before returning the system to normal operation.
