Description
The Genuine ATA TrioCode128 Frequency Upgrade Kit is designed to upgrade compatible older Automatic Technology Australia garage door operators from the previous remote control system to the newer TrioCode128 technology.
Ideal for older ATA garage door operators where original remotes may be difficult to source or where an upgrade to the current TrioCode128 remote platform is preferred, the kit provides a convenient way to modernise the remote control system without replacing the complete garage door operator.
The kit includes a genuine ATA TrioCode128 plug-in receiver with wiring harness and a genuine ATA PTX-6 four-button transmitter. ATA identifies the plug-in receiver kit as Part No. 14815 and the black PTX-6 transmitter as Part No. 61228.
📡 Upgrade to TrioCode128 Technology
The ATA TrioCode128 Frequency Upgrade Kit allows compatible older ATA garage door operators to use modern TrioCode128 remote controls.
Rather than replacing an otherwise operational garage door opener simply because the original remote control system is outdated, the upgrade receiver provides a new TrioCode128 receiving system for the existing operator.
This makes it an ideal solution for extending the useful life of compatible older ATA garage door operators.
🔄 Modernise Your Existing ATA Garage Door Opener
Many older ATA garage door operators remain mechanically and electrically serviceable but use earlier-generation remote control technology.
Installing the TrioCode128 upgrade kit allows the existing operator to be converted to the newer remote platform while retaining the original motor and drive system.
This is particularly useful when:
- Original remotes are becoming difficult to obtain
- Additional remotes are required
- You want to upgrade to TrioCode128 remotes
- The existing garage door operator is otherwise operating correctly
- Replacing the complete garage door operator is unnecessary
🔐 TrioCode128 Security Technology
ATA TrioCode128 technology is designed to provide secure and reliable remote control operation.
The system uses 128-bit encryption and transmits across multiple frequencies to help overcome interference from other wireless and electronic devices.
ATA developed TrioCode128 as the successor to its original TrioCode remote technology, providing an updated remote control platform for compatible garage door and gate automation systems.
📶 Multi-Frequency Transmission
TrioCode128 remote controls transmit across three frequencies, helping provide reliable communication between the remote control and receiver.
This multi-frequency approach is designed to reduce problems caused by radio interference. If interference affects one frequency, the system can use the other frequencies to maintain reliable operation.
This makes TrioCode128 particularly suitable for modern residential environments where numerous wireless devices may be operating nearby.
🔌 Plug-In Receiver & Harness
The included ATA TrioCode128 receiver is supplied with a pre-wired harness designed to simplify installation into compatible ATA garage door operators.
The harness allows the receiver to connect to compatible operator terminals, providing a clean upgrade without requiring replacement of the complete garage door opener.
The ATA 14815 is a two-channel plug-in receiver kit and is designed for use with a range of compatible ATA operators.
🎮 Genuine ATA PTX-6 Remote Included
The upgrade kit includes one genuine ATA PTX-6 TrioCode128 four-button remote control.
The PTX-6 provides four programmable buttons, allowing multiple compatible garage doors, gates or functions to be controlled from a single transmitter when correctly configured.
The included black PTX-6 is ATA Part No. 61228.
Additional compatible TrioCode128 remotes can also be programmed to the receiver when required.
🏠 Keep Your Existing Garage Door Operator
One of the biggest advantages of the TrioCode128 Frequency Upgrade Kit is that the complete garage door operator does not need to be replaced simply because its original remote control technology is outdated.
If the existing opener is still operating correctly, installing the upgrade receiver can provide a practical and cost-effective way to move to the newer remote control platform.
This is particularly useful for older ATA operators that have provided many years of reliable service.
🔧 Ideal Replacement for Older Remote Systems
The upgrade kit provides a straightforward solution when transitioning away from an older ATA remote control system.
Once the TrioCode128 receiver has been installed, compatible TrioCode128 transmitters can be programmed into the new receiver.
This provides access to a wider range of modern ATA remote controls while retaining the existing garage door operator.
🧰 Genuine Automatic Technology Australia Components
The kit uses genuine Automatic Technology Australia components specifically designed for ATA garage door and gate automation systems.
Using genuine ATA receiver and transmitter components provides a purpose-designed upgrade solution and ensures compatibility with the TrioCode128 remote control platform.
Key Features
- Upgrades compatible older ATA garage door operators to TrioCode128
- Allows modern TrioCode128 remotes to be used with compatible older operators
- Genuine ATA upgrade components
- Genuine ATA 2-channel plug-in receiver kit
- Pre-wired receiver harness
- Genuine ATA PTX-6 four-button remote included
- 128-bit TrioCode technology
- Multi-frequency remote transmission
- Helps overcome radio frequency interference
- Allows additional compatible TrioCode128 remotes to be programmed
- No need to replace an otherwise operational compatible garage door operator
- Ideal for upgrading older ATA remote control systems
- Suitable for residential garage door applications
Kit Includes
The ATA TrioCode128 Frequency Upgrade Kit includes:
- 1 x ATA TrioCode128 Plug-In Receiver & Harness – Part No. 14815
- 1 x ATA PTX-6 TrioCode128 4-Button Transmitter – Part No. 61228
Both components are genuine Automatic Technology Australia products.
Compatibility
Designed for compatible older ATA garage door operators, including:
- ATA EasyRoller GDO-4 – All Versions
- ATA SecuraLift GDO-2 – All Versions
- ATA AussieRoller GDO-5 – All Versions
The receiver harness is designed to provide a straightforward connection to compatible ATA operators, allowing the existing remote receiving system to be upgraded to TrioCode128.
⚠️ Please Note
This kit upgrades the remote control receiving system of a compatible garage door operator. It does not replace or upgrade the garage door operator’s motor, control system or mechanical components.
Once installed, the new TrioCode128 receiver operates as the receiver for compatible TrioCode128 remote controls.
Compatibility can vary between garage door operator models and versions. Please confirm your ATA garage door operator model before ordering.
