Description
The ATA ATS-2V3 Tempo Sectional Garage Door Opener is a powerful residential overhead garage door operator designed for single and double sectional garage doors and compatible tilt doors.
With an 1100N short-term peak force, support for correctly balanced doors up to 18m² and 200kg gross weight, and a fast 180mm/sec door travel speed, the Tempo provides smooth and reliable automatic operation for a wide range of residential garage doors.
The ATS-2V3 also incorporates soft start and soft stop operation, electronic obstruction detection, LED lighting, Vacation Mode, service reminders and compatibility with optional Smart Phone Control, Safety Beams and Battery Backup.
ATA Part Number: 87920
This product is supplied without a C-Rail, allowing the appropriate ATA compatible rail to be selected separately for the garage door installation.
⚡ Powerful 1100N Peak Force
The ATS-2V3 Tempo provides:
- Short-Term Peak Force: 1100N
- Rated Load: 400N
- Maximum Lifting Under Spring Tension: 200N / 20kg
This provides the power required to automate a wide range of correctly balanced residential sectional and compatible tilt garage doors.
The garage door must always be correctly spring balanced and capable of being operated manually.
🚪 Up to 18m² Door Area
The ATA Tempo ATS-2V3 is suitable for correctly balanced garage doors up to:
- Maximum Door Area: 18m²
- Maximum Gross Door Weight: 200kg
The 200kg rating is the gross door weight including the door fittings.
Door suitability should be determined using both the physical door size and the operating balance of the complete garage door.
🏎️ Fast 180mm/sec Operation
The Tempo provides a door travel speed of up to:
- 180mm/sec
Fast operation reduces the amount of time spent waiting for the garage door to open when entering or leaving the property.
The operator also incorporates controlled acceleration and deceleration for smoother operation.
🔄 Soft Start & Soft Stop
Soft start and soft stop technology gradually increases and decreases the operating speed at the beginning and end of each door cycle.
This helps provide:
- Smoother garage door movement
- Reduced sudden movement
- Reduced mechanical shock
- Quieter operation
- Less unnecessary stress on the door and opener
This is particularly beneficial on larger sectional garage doors.
🛡️ Electronic Obstruction Detection
The ATS-2V3 incorporates electronic safety obstruction detection.
If the garage door encounters an obstruction during operation, the opener can detect the increased resistance and respond accordingly.
Correct obstruction sensitivity is established as part of the operator setup and commissioning procedure.
This system should always be used together with a correctly balanced and mechanically sound garage door.
📡 Multi-Frequency UHF Receiver
The Tempo incorporates ATA’s multi-frequency UHF receiver system.
The receiver provides storage capacity for up to:
- 64 × 4-button transmitters
This provides ample transmitter capacity for residential applications and properties requiring multiple authorised users.
🎮 Multiple Device Control
Compatible multi-button ATA transmitters can be used to control multiple compatible automation systems.
Depending on the equipment installed and programming configuration, a single transmitter can potentially operate:
- Garage Door 1
- Garage Door 2
- Automatic Gate
- Another compatible ATA device
This can reduce the need to carry separate remote controls for different automation systems.
💡 Integrated LED Lighting
The ATS-2V3 incorporates an LED light module to provide illumination inside the garage during operation.
The light automatically provides additional visibility when entering or leaving the garage at night.
LED technology provides efficient illumination without relying on a traditional incandescent globe.
📱 Optional Smart Phone Control
The ATA Tempo ATS-2V3 is compatible with ATA Smart Phone Control when the appropriate optional Smart Phone Control Kit is installed.
Smart connectivity is not built into the standard ATS-2V3 Tempo operator.
The optional smart system can add features such as:
- Smartphone garage door operation
- Remote access
- Door status monitoring
- Notifications
- Activity information
- Additional smart access functionality
A compatible Smart Phone Control Kit, suitable network connection and internet access are required.
Where the garage door can be operated remotely without direct line-of-sight, the required compatible Safety Beams must also be installed.
👁️ Optional Safety Beams
Compatible ATA Safety Beams can be connected to the ATS-2V3 to provide non-contact obstruction detection across the garage door opening.
Safety beams are particularly important for applications involving:
- Smart Phone Control
- Auto-Close
- Remote operation without direct line-of-sight
If the beam is interrupted while the door is closing, the operator can respond before the door physically contacts the obstruction.
🔄 Auto-Close Capability
The ATS-2V3 supports Auto-Close functionality when the required safety equipment is installed and the system is correctly configured.
Auto-Close can automatically close the garage door after a programmed period.
Compatible Safety Beams are required for safe Auto-Close operation.
🔋 Optional Battery Backup
The Tempo ATS-2V3 supports an optional battery backup system.
When the compatible battery backup is installed, the opener can retain limited powered operation during a mains electricity failure.
This can be particularly useful for garages where:
- The garage is the primary vehicle entrance
- There is limited alternative access
- Power outages are common
- Manual door operation would be inconvenient
Battery backup is an optional accessory and is not included with the standard operator unless specifically stated.
🔒 Vacation Mode
Vacation Mode provides additional security when the property is unattended.
When activated, the system can restrict normal transmitter access until Vacation Mode is cancelled using the appropriate master transmitter.
This is particularly useful when leaving the property unattended for an extended period.
🔔 Service Reminder
The Tempo includes a service reminder function designed to indicate when the garage door and opener are due for periodic servicing.
Regular servicing is important because the operator relies on the garage door being:
- Correctly balanced
- Mechanically sound
- Moving freely
- Properly adjusted
- Regularly maintained
A garage door that becomes heavy or difficult to move places unnecessary load on the opener.
📐 Only 57mm Minimum Headroom
The ATS-2V3 requires as little as:
- 57mm Minimum Headroom
This makes the Tempo suitable for many low-headroom garage installations where space between the highest point of door travel and the ceiling is limited.
Actual installation requirements will also depend on the selected C-Rail, garage door configuration and mounting arrangement.
⏱️ 4-Minute Rated Operating Time
The ATS-2V3 has a rated operating time of:
- 4 Minutes
The operator is designed primarily for residential garage door applications rather than continuous-duty commercial operation.
🌡️ Operating Temperature
The published rated operating temperature is:
- +5°C to +40°C
The operator should be installed in an appropriate protected garage environment in accordance with ATA installation requirements.
🔌 230–240V AC Power Supply
Published electrical specifications include:
- Rated Voltage: 230–240V AC
- Frequency: 50Hz
- Rated Power Input: 225W
The operator is designed for connection to a suitable Australian mains power outlet.
🛤️ C-Rail Selected Separately
This listing is for the ATA ATS-2V3 Tempo garage door opener without a C-Rail.
The rail is selected separately to suit the garage door installation.
This is particularly useful for:
- Replacement operator installations
- Existing compatible rail systems
- Installations requiring a specific rail length
- Choosing between compatible rail configurations
Always confirm the selected rail is suitable for both the ATS-2V3 and the garage door height.
🚪 Sectional & Compatible Tilt Doors
The Tempo is primarily designed as a sectional garage door opener and can also be used with compatible tilt door installations.
The garage door must be correctly balanced and suitable for automatic operation.
Door type, dimensions, weight, spring balance and available headroom should all be assessed before installation.
⭐ Key Features
- Genuine ATA garage door opener
- Tempo ATS-2V3
- ATA Part Number 87920
- Designed for sectional garage doors
- Suitable for compatible tilt doors
- Maximum door area up to 18m²
- Maximum gross door weight up to 200kg
- 1100N short-term peak force
- 400N rated load
- Maximum lifting under spring tension of 200N / 20kg
- Fast 180mm/sec door travel speed
- Soft start and soft stop
- Electronic obstruction detection
- Multi-frequency UHF receiver
- Memory for up to 64 × 4-button transmitters
- Integrated LED lighting
- Vacation Mode
- Service reminder
- Auto-Close capability
- Optional Safety Beams
- Optional Smart Phone Control
- Optional Battery Backup
- Only 57mm minimum headroom
- C-Rail selected separately
- Ideal for single and double residential sectional doors
🔧 Specifications
- Brand: ATA / Automatic Technology
- Model: Tempo ATS-2V3
- ATA Part Number: 87920
- Product Type: Sectional Garage Door Opener
- Rated Voltage: 230–240V AC
- Rated Frequency: 50Hz
- Rated Power Input: 225W
- Maximum Door Area: 18m²
- Maximum Gross Door Weight: 200kg
- Short-Term Peak Force: 1100N
- Rated Load: 400N
- Maximum Lifting Under Spring Tension: 200N / 20kg
- Door Travel Speed: 180mm/sec
- Minimum Headroom: 57mm
- Rated Operating Time: 4 Minutes
- Rated Temperature: +5°C to +40°C
- Receiver: Multi-Frequency UHF
- Receiver Capacity: 64 × 4-Button Transmitters
- Transmitter Battery Type: CR2032 3V
- Main Light: 1 × LED Module
- Smart Phone Connectivity: Optional Smart Phone Control Kit Required
- Safety Beam Compatible: Yes
- Battery Backup Compatible: Yes
- Auto-Close Compatible: Yes
- C-Rail Included: No
🔗 Compatibility
The ATA ATS-2V3 Tempo is designed for compatible residential sectional garage doors and suitable tilt door installations.
The door must:
- Be correctly spring balanced
- Move freely by hand
- Be mechanically sound
- Be suitable for automatic operation
- Have a maximum area of 18m²
- Have a maximum gross weight of 200kg
- Remain within the operator’s published lifting requirements
The appropriate compatible ATA C-Rail must be selected separately according to the garage door height and installation requirements.
Compatible optional accessories include selected:
- ATA Smart Phone Control equipment
- ATA Safety Beams
- ATA Wireless Safety Beams
- ATA Battery Backup
- ATA wall controls
- ATA compatible transmitters
Accessory compatibility should be confirmed against the exact ATS-2V3 and accessory revision before ordering.
⚠️ Please Note
This product is the ATA ATS-2V3 Tempo Sectional Garage Door Opener without a C-Rail.
ATA Part Number: 87920
The C-Rail is not included and must be selected separately.
The maximum 200kg specification refers to gross door weight including fittings. The garage door must also be correctly balanced and capable of being safely operated by hand.
The ATS-2V3 Tempo does not include an integrated Smart Hub. Smart Phone Control requires the appropriate optional ATA Smart Phone Control Kit.
Safety Beams are required where applicable for functions such as Auto-Close and remote smart operation without direct line-of-sight.
Battery Backup is optional and is not included unless specifically stated.
Installation, adjustment and safety testing should be completed in accordance with the ATA installation instructions.
If you are unsure whether the ATS-2V3 Tempo is suitable for your garage door or require assistance selecting the correct C-Rail, contact our Technical Support team on 1300 733 066.
