Description
The FAAC Rod Protective Housing is a genuine FAAC protective cover designed for the standard FAAC 415 swing gate operator with a 300 mm rod stroke.
Installed over the exposed actuator rod section, the housing provides additional physical protection around the moving rod assembly while maintaining the original appearance and fit of the FAAC 415 operator.
FAAC Part Number: 727525
🛡️ Protective Rod Housing
The FAAC 727525 is designed to provide a protective cover around the rod of the compatible FAAC 415 linear swing gate operator.
It provides an additional physical barrier around the exposed actuator rod and helps protect the rod assembly in normal gate automation applications.
⚙️ Genuine FAAC Accessory
Part number 727525 is a genuine FAAC accessory specifically manufactured for the FAAC 415 operator.
Using the correct FAAC housing ensures the component is designed around the dimensions and movement of the compatible 415 actuator.
🚧 Designed for the FAAC 415
The protective housing is specifically designed for the standard FAAC 415 with a 300 mm rod stroke.
The FAAC 415 is a linear electromechanical operator used for automating swing gates.
The standard 415 uses:
- 300 mm rod stroke
- Linear electromechanical drive
- Maximum opening angle up to 110°
- IP54 operator protection rating
The 727525 housing is designed around this 300 mm-stroke configuration.
🔌 Suitable for 24V & 230V 415 Operators
FAAC lists the 727525 protective housing as an accessory for both standard versions of the 415 operator.
It can therefore be used with compatible:
- FAAC 415 24V
- FAAC 415 230V
Compatibility is determined by the 415 operator body and its 300 mm rod stroke rather than the operator supply voltage.
📏 300 mm Rod Stroke Compatibility
The most important compatibility requirement is the actuator’s rod stroke.
The FAAC 727525 is specifically designed for:
- FAAC 415
- 300 mm rod stroke
FAAC also manufactures longer 415-family operators with a 400 mm rod stroke. The 727525 should not be assumed to fit those longer versions.
🚫 Not for the 415 L 400 mm Stroke
The standard FAAC 415 and the FAAC 415 L use different rod stroke lengths.
The standard 415 uses a 300 mm stroke, while the 415 L uses a longer 400 mm stroke.
Part number 727525 is specifically listed by FAAC for the 300 mm-stroke model.
Always check the exact operator model before ordering.
🏠 Residential Swing Gate Applications
The protective housing is suitable for compatible FAAC 415 installations on residential swing gates.
Typical applications include:
- Driveway swing gates
- Residential entrance gates
- Single swing gates
- Double swing gates
- Steel gates
- Aluminium gates
- Timber-clad gate systems using compatible 415 operators
🔧 Replacement or New Installation
The FAAC 727525 can be used where a compatible rod housing needs to be added or replaced.
It is suitable for:
- New FAAC 415 installations
- Replacement of a damaged rod housing
- Replacement of a missing housing
- Maintenance of existing 415 operators
- Refurbishment of compatible gate automation systems
🛠️ Operator Protection
Swing gate operators are installed outdoors and are exposed to normal environmental and site conditions.
The rod protective housing provides an additional physical cover around the compatible actuator rod.
Maintaining the rod and surrounding components in good condition is important for reliable operation of a linear swing gate operator.
The operator should still be inspected and maintained according to FAAC service requirements.
🔍 Check the Operator Before Ordering
Before ordering the 727525 housing, check the identification of the existing FAAC operator.
The required operator is the standard:
- FAAC 415
- 300 mm rod stroke
Do not identify compatibility based only on the appearance of the operator, as different FAAC 415-family models can have similar external designs.
🔩 Purpose-Built Fit
As a genuine FAAC component, the housing is designed specifically around the compatible 415 actuator.
This provides a purpose-built installation rather than attempting to fabricate or adapt a generic cover around the moving actuator rod.
⭐ Key Features
- Genuine FAAC accessory
- FAAC part number 727525
- Rod protective housing
- Also described by FAAC as a shaft cover
- Designed specifically for the FAAC 415
- Suitable for 300 mm rod stroke
- Compatible with standard 415 24V
- Compatible with standard 415 230V
- Provides additional physical protection around the actuator rod
- Suitable for new installations
- Suitable as a replacement component
- Purpose-built for the FAAC 415 operator
- Suitable for residential swing gate automation
- Genuine FAAC replacement/accessory component
🔧 Specifications
- Manufacturer: FAAC
- Brand: FAAC
- Product: Rod Protective Housing
- FAAC Part Number: 727525
- Product Type: Actuator Rod / Shaft Cover
- Operator Family: FAAC 415
- Compatible Rod Stroke: 300 mm
- Compatible with 415 24V: Yes
- Compatible with 415 230V: Yes
- Installation Location: Operator Rod Assembly
- Application: Swing Gate Automation
- Quantity: 1
🔗 Compatibility
Designed for:
- FAAC 415 24V – 300 mm rod stroke
- FAAC 415 230V – 300 mm rod stroke
FAAC Part Number:
- 727525
Not intended for the longer FAAC 415 L configuration with a 400 mm rod stroke.
Always check the exact model and rod stroke of the existing operator before ordering.
⚠️ Please Note
This listing is for the FAAC Rod Protective Housing only.
The FAAC 415 gate operator, mounting brackets, control board, receiver, remotes and other accessories are not included unless specifically stated.
FAAC identifies part number 727525 as the shaft cover for the 415 with a 300 mm rod stroke.
It should not be assumed to fit FAAC 415-family operators using a different rod stroke.
Check the model identification of the existing operator before ordering.
Installation should be carried out with the gate automation isolated from power and the operator secured against unexpected movement.
