Description
Genius Falcon M14 C Sliding Gate Operator – 6110002
The Genius Falcon M14 C is a heavy-duty 230V electromechanical sliding gate operator designed for large residential, commercial and industrial sliding gates weighing up to 1,400kg.
Part number 6110002 features a powerful 650W motor, robust bronze and steel reduction gearbox, magnetic limit switches and an integrated Sprint 382 S electronic control board.
With a gate speed of approximately 10m/min and up to 1,100N of drive thrust, the Falcon M14 C provides a strong and reliable automation solution for large sliding gates requiring substantially greater capacity than a standard residential operator.
Genius Part Number: 6110002
🏭 Heavy-Duty Sliding Gate Automation
The Genius Falcon M14 C is designed specifically for heavy sliding gate applications.
Genius specifies the Falcon M14 C for:
- Maximum gate weight: 1,400kg
- Maximum gate length: 15m
- Gate speed: 10m/min
- Maximum thrust: 1,100N
- Duty cycle: S3 – 40% at 20°C
Typical applications include:
- Large residential sliding gates
- Commercial properties
- Industrial facilities
- Warehouses
- Factory entrances
- Shared access gates
- Heavy steel sliding gates
🚪 Sliding Gates Up to 1,400kg
The Falcon M14 C is rated for sliding gate leaves weighing up to 1,400kg.
Its heavy-duty 230V motor and all-metal internal reduction system provide the drive force required for substantially larger gates than typical residential sliding gate operators.
Actual operator suitability also depends on:
- Gate construction
- Rolling resistance
- Track condition
- Wheel condition
- Gate alignment
- Wind loading
- Gate length
- Required operating frequency
⚡ Powerful 230V Motor
The Falcon M14 C uses a 230V electric motor designed for heavy sliding gate applications.
Genius specifies:
- Power supply: 230V AC
- Motor voltage: 230V
- Rated power: 650W
- Current: 2.8A
- Maximum torque: 35Nm
- Maximum thrust: 110daN / approximately 1,100N
- Thermal protection: 140°C
- Capacitor: 16µF
The 230V motor provides the substantial torque required for large commercial and industrial gate leaves.
⚙️ Heavy-Duty Metal Transmission
The Falcon M14 C uses a robust internal reduction system designed for long-term operation on heavy gates.
The internal transmission incorporates:
- Bronze crown wheel
- Steel worm screw
- Metal reduction components
- Precision-supported drive shaft
The combination of a bronze crown and steel worm screw provides a durable transmission capable of handling the substantial forces generated when operating large sliding gates.
🏎️ 10 Metres Per Minute
The Genius Falcon M14 C provides a gate travel speed of approximately:
- 10 metres per minute
The operator uses a Z16 Module 4 drive pinion to transfer movement from the reduction gearbox to the gate rack.
This provides a controlled operating speed suitable for large and heavy sliding gate leaves.
🔁 40% Duty Cycle
Genius specifies the Falcon M14 C for:
- S3 – 40% duty at 20°C
This makes the operator suitable for residential, commercial and industrial entrances requiring moderate to frequent operation.
For applications requiring extremely high or continuous operating frequencies, an operator specifically rated for continuous duty should be considered.
🧠 Integrated Sprint 382 S Control Board
The current Falcon M14 C incorporates the Genius Sprint 382 S electronic control board directly within the operator.
The control board is installed within a protective enclosure and features an accessible programming interface for setup and adjustment.
The control system provides management of functions including:
- Gate opening and closing
- Automatic closing
- Operating logic
- Motor force
- Partial opening
- Safety devices
- Limit switch inputs
- Access control commands
- Radio receiver input
- Programmable operating parameters
The control panel assembly can be rotated to provide easier access during installation, programming and servicing.
🧲 Magnetic Limit Switches
The Genius Falcon M14 C uses magnetic opening and closing limit switches.
Magnetic limit stops mounted to the gate rack communicate with the internal limit switch sensor as the gate approaches its fully open and fully closed positions.
Benefits of magnetic limit switching include:
- Contact-free operation
- No mechanical limit lever to strike
- Reliable position detection
- Reduced mechanical wear
- Simple adjustment during installation
🛑 Optional Encoder
The Falcon M14 C allows installation of an optional encoder for enhanced gate movement monitoring and obstacle detection.
When installed with the appropriate control configuration, encoder feedback can provide additional information about movement of the gate and assist with obstacle detection.
The encoder is an optional accessory and is not included with the standard operator unless specifically stated.
🔒 Non-Reversing Gearmotor
The Falcon M14 C is a non-reversing electromechanical sliding gate operator.
When the operator is engaged and stationary, the internal reduction gearbox resists manual movement of the gate.
A separate electric lock is therefore generally not required for a standard sliding gate installation.
🔑 Key-Protected Manual Release
The Genius Falcon M14 C incorporates a rotary manual release system protected by a personalised key.
The rotary release arrangement allows the gearmotor to be disengaged without requiring a large external release lever to swing outward.
Once released, the gate can be manually moved during:
- Power failures
- System faults
- Servicing
- Maintenance
- Emergency situations
The release mechanism should remain accessible after installation.
⚙️ Z16 Module 4 Drive Pinion
The Falcon M14 C uses:
- Z16 drive pinion
- Module 4 rack profile
The pinion engages with compatible Module 4 gate rack installed along the sliding gate.
Correct rack alignment and pinion clearance are essential for reliable and quiet operation.
🏗️ Robust Operator Construction
The Falcon M14 C has been designed for demanding gate environments.
Construction features include:
- Aluminium gearmotor body
- Polyester powder-coated finish
- Protective ABS outer housing
- Bronze crown wheel
- Steel worm screw
- Heavy-duty internal transmission
- Protected magnetic limit switch system
The complete operator weighs approximately 14kg.
🌦️ Outdoor Gate Automation
The Falcon M14 C is designed for external sliding gate installations.
Genius specifies:
- Operating temperature: -20°C to +55°C
- Protection rating: IP44
- Thermal protection: 140°C
The operator should be mounted on an appropriate foundation with suitable drainage and electrical protection.
📐 Operator Dimensions
The Falcon M14 C has approximate overall dimensions of:
- Length: 340mm
- Width: 225mm
- Height: 330mm
The Module 4 drive pinion operates at approximately 91mm above the mounting level.
Adequate clearance should be allowed around the operator for installation, manual release access and future servicing.
Key Features
- Genuine Genius sliding gate operator
- Genius Part Number: 6110002
- Model: Falcon M14 C
- Heavy-duty 230V electromechanical operator
- Maximum gate weight of 1,400kg
- Maximum gate length of 15m
- 650W motor
- Maximum torque of 35Nm
- Maximum thrust of approximately 1,100N
- Gate speed of 10m/min
- S3 – 40% duty cycle at 20°C
- Integrated Sprint 382 S control board
- Magnetic opening and closing limit switches
- Optional encoder capability
- Bronze crown wheel
- Steel worm screw
- Non-reversing gearbox
- Key-protected rotary manual release
- Z16 Module 4 drive pinion
- Powder-coated aluminium gearmotor body
- Protective ABS housing
- IP44 protection
- Designed for heavy residential, commercial and industrial gates
Specifications
- Manufacturer: Genius
- Brand: Genius
- Model: Falcon M14 C
- Part Number: 6110002
- Product Type: Heavy-Duty Sliding Gate Operator
- Application: Residential / Commercial / Industrial
- Power Supply: 230V AC
- Motor Voltage: 230V
- Rated Power: 650W
- Current: 2.8A
- Thermal Protection: 140°C
- Capacitor: 16µF
- Maximum Torque: 35Nm
- Maximum Thrust: 110daN / Approx. 1,100N
- Maximum Gate Weight: 1,400kg
- Maximum Gate Length: 15m
- Gate Speed: 10m/min
- Duty Cycle: S3 – 40% at 20°C
- Drive Pinion: Z16 Module 4
- Limit Switches: Magnetic
- Encoder: Optional
- Control Board: Genius Sprint 382 S
- Manual Release: Rotary Key-Protected Release
- Operating Temperature: -20°C to +55°C
- Protection Rating: IP44
- Operator Weight: Approx. 14kg
- Dimensions: Approx. 340 × 225 × 330mm
- Pinion Height: Approx. 91mm
Compatibility
Suitable for compatible sliding gate installations weighing up to 1,400kg.
Compatible with appropriate:
- Module 4 steel gate rack
- Module 4 reinforced nylon rack where suitable for the gate load
- Genius radio receivers
- Genius remote transmitters
- Genius photocells
- Genius flashing lights
- Compatible safety edges
- Wired access control systems
- Optional Falcon encoder
🔄 Genius Falcon M14 C vs Falcon M20 C
Genius Falcon M14 C – 6110002:
- Maximum gate weight: 1,400kg
- Rated power: 650W
- Current: 2.8A
- Maximum torque: 35Nm
- Maximum thrust: 1,100N
- Capacitor: 16µF
- Gate speed: 10m/min
- Duty cycle: S3 – 40%
- Operator weight: Approx. 14kg
- This product
Genius Falcon M20 C:
- Maximum gate weight: 2,000kg
- Rated power: 800W
- Current: 3.5A
- Maximum torque: 45Nm
- Maximum thrust: 1,500N
- Capacitor: 20µF
- Gate speed: 10m/min
- Duty cycle: S3 – 40%
- Operator weight: Approx. 15kg
Both models use a Z16 Module 4 pinion and share the same 10m/min operating speed. The Falcon M20 C provides a larger motor, greater torque and increased drive force for heavier sliding gates.
⚠️ Please Note
This listing is for Genius part number 6110002, the Genius Falcon M14 C 230V Sliding Gate Operator.
The current Falcon M14 C incorporates the Genius Sprint 382 S electronic control board.
The Falcon M14 C is designed for sliding gate leaves weighing up to 1,400kg and provides a gate speed of approximately 10m/min.
The operator is rated S3 – 40% duty at an ambient temperature of 20°C and is not a continuous-duty operator.
The encoder is an optional accessory and is not included unless specifically stated.
Gate rack, radio receiver, transmitters, photocells, flashing light, safety edges and other installation accessories are separate unless specifically stated as included.
The maximum 1,400kg gate weight is a manufacturer limit and does not automatically mean every gate below 1,400kg is suitable. Gate construction, rolling resistance, track condition, wheels, alignment, wind loading, gate length and required operating frequency must also be considered.
If you are unsure whether the Genius Falcon M14 C is suitable for your sliding gate, contact our Technical Support team on 1300 733 066.
